32205 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 32205. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
32205 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 11 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| TIMKEN32205Tapered roller bearing |
| 49.8 kN | 42.1 kN | — | — | 0.18 kg180 g |
| SKF32205 BSingle row tapered roller bearing |
| 44.5 kN | 44 kN | 10000 rpm | 13000 rpm | 0.191 kg191 g |
| SKF32205 BJ2/QSingle row tapered roller bearing |
| 35.8 kN | 44 kN | 9500 rpm | 13000 rpm | 0.191 kg191 g |
| FAG32205-BTapered roller bearing |
| 37.5 kN | 46 kN | 8100 rpm | 14100 rpm | 0.195 kg195 g |
| FAG32205-B-TVPTapered roller bearing |
| 37.5 kN | 46 kN | 8000 rpm | 13300 rpm | 0.19 kg190 g |
| FAG32205-B-XLTapered roller bearing |
| 46.5 kN | 46 kN | 8100 rpm | 17100 rpm | 0.194 kg194 g |
| FAG32205-HTapered roller bearing |
| 38 kN | 44.5 kN | 8000 rpm | 11600 rpm | 0.186 kg186 g |
| FAG32205-XLTapered roller bearing |
| 50 kN | 45 kN | 8000 rpm | 17500 rpm | 0.1846 kg184.6 g |
| TIMKEN32205BTapered roller bearing |
| 47 kN | 46.3 kN | — | — | 0.19 kg190 g |
| KOYO32205JRTapered roller bearing |
| 49.7 kN | 44.8 kN | — | 7900 rpmLimiting Speeds(Grease Lub.): 7900 min-1Limiting Speeds(Oil Lub.): 11000 min-1 | 0.188 kg188 g |
| KOYO32205XRTapered roller bearing |
| 45.5 kN | 43.2 kN | — | 7900 rpmLimiting Speeds(Grease Lub.): 7900 min-1Limiting Speeds(Oil Lub.): 11000 min-1 | 0.2 kg200 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| TIMKEN 32205 | Open | ABMA Class K | Not recorded | Steel cage | Not recorded | Not recorded |
| SKF 32205 B | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32205 BJ2/Q | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| FAG 32205-B | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32205-B-TVP | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | TVP — Cage made of glass-fiber reinforced plastic, window cage | Not recorded | Not recorded |
| FAG 32205-B-XL | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32205-H | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32205-XL | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| TIMKEN 32205B | Open | ABMA Class K | Not recorded | Steel cage | Not recorded | Not recorded |
| KOYO 32205JR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 32205XR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
32205
Tapered roller bearing
View full technical record →FAG32205-B
Tapered roller bearing
View full technical record →TIMKEN32205B
Tapered roller bearing
View full technical record →SKF32205 B
Single row tapered roller bearing
View full technical record →SKF32205 BJ2/Q
Single row tapered roller bearing
View full technical record →FAG32205-B-TVP
Tapered roller bearing
View full technical record →FAG32205-B-XL
Tapered roller bearing
View full technical record →FAG32205-H
Tapered roller bearing
View full technical record →KOYO32205JR
Tapered roller bearing
View full technical record →FAG32205-XL
Tapered roller bearing
View full technical record →KOYO32205XR
Tapered roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.