3214 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 3214. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
3214 dimensions and recorded technical data
The recorded 3214 base designation measures 70×125×39.7 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 9 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| KOYO3214Angular contact ball bearing |
| 97.4 kN | 96.4 kN | — | 3100 rpmLimiting Speeds(Grease Lub.): 3100 min-1Limiting Speeds(Oil Lub.): 4100 min-1 | 1.92 kg1920 g |
| SKF3214 ADouble row angular contact ball bearing |
| 88.4 kN | 80 kN | 5600 rpm | 4500 rpm | 1.72 kg1720 g |
| SKF3214 A-2ZDouble row angular contact ball bearing with seals or shields |
| 88.4 kN | 80 kN | 5600 rpm | 4500 rpm | 1.67 kg1670 g |
| SKF3214 A-2Z/MT33Double row angular contact ball bearing with seals or shields |
| 88.4 kN | 80 kN | 5600 rpm | 4500 rpm | 1.67 kg1670 g |
| SKF3214 A/C3Double row angular contact ball bearing |
| 88.4 kN | 80 kN | 5600 rpm | 4500 rpm | 1.72 kg1720 g |
| SKF3214 ANR/C3Double row angular contact ball bearing |
| 88.4 kN | 80 kN | 5600 rpm | 4500 rpm | 1.76 kg1760 g |
| FAG3214-B-2RSR-TVHAngular contact ball bearing |
| 82 kN | 79 kN | — | 3100 rpm | 1.68 kg1680 g |
| FAG3214-B-2Z-TVHAngular contact ball bearing |
| 82 kN | 79 kN | 5600 rpm | 4150 rpm | 1.73 kg1730 g |
| FAG3214-B-TVHAngular contact ball bearing |
| 82 kN | 79 kN | 5600 rpm | 5600 rpm | 1.73 kg1730 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| KOYO 3214 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 3214 A | Without | Not recorded | Not recorded | Sheet metal | Bearing steel | None |
| SKF 3214 A-2Z | Shield on both sides | Not recorded | Not recorded | Sheet metal | Bearing steel | Grease |
| SKF 3214 A-2Z/MT33 | Shield on both sides | Not recorded | Not recorded | Sheet metal | Bearing steel | Grease |
| SKF 3214 A/C3 | Without | Not recorded | Not recorded | Sheet metal | Bearing steel | None |
| SKF 3214 ANR/C3 | Without | Not recorded | Not recorded | Sheet metal | Bearing steel | None |
| FAG 3214-B-2RSR-TVH | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | Not recorded | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 3214-B-2Z-TVH | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | Not recorded | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 3214-B-TVH | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 | Not recorded | GA13 — Ball bearing and insert bearing grease |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
3214
Angular contact ball bearing
View full technical record →SKF3214 A
Double row angular contact ball bearing
View full technical record →SKF3214 A-2Z
Double row angular contact ball bearing with seals or shields
View full technical record →SKF3214 A-2Z/MT33
Double row angular contact ball bearing with seals or shields
View full technical record →SKF3214 A/C3
Double row angular contact ball bearing
View full technical record →SKF3214 ANR/C3
Double row angular contact ball bearing
View full technical record →FAG3214-B-2RSR-TVH
Angular contact ball bearing
View full technical record →FAG3214-B-2Z-TVH
Angular contact ball bearing
View full technical record →FAG3214-B-TVH
Angular contact ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.