Find · understand · compare

3211 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 3211. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

Exact model evidence

3211 dimensions and recorded technical data

The recorded 3211 base designation measures 55×100×33.3 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 26 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designation	Named dimensions (mm / in)	Dynamic C (kN)	Static C0 (kN)	Reference speed (rpm)	Limiting speed (rpm)	Mass (kg / g)
KOYO3211Angular contact ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 33.3 mm 1.311024 in	63.6 kN	60.2 kN	—	3900 rpmLimiting Speeds(Grease Lub.): 3900 min-1Limiting Speeds(Oil Lub.): 5100 min-1	1.05 kg1050 g
SKF3211 ADouble row angular contact ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 33.3 mm 1.311024 in	61 kN	52 kN	6300 rpm	6300 rpm	0.954 kg954 g
SKF3211 A-2RS1Double row angular contact ball bearing with seals or shields	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 33.3 mm 1.311024 in	61 kN	52 kN	—	4500 rpm	0.942 kg942 g
SKF3211 A-2RS1/C3Double row angular contact ball bearing with seals or shields	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 33.3 mm 1.311024 in	61 kN	52 kN	—	4500 rpm	0.942 kg942 g
SKF3211 A-2RS1/MT33Double row angular contact ball bearing with seals or shields	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 33.3 mm 1.311024 in	61 kN	52 kN	—	4500 rpm	0.942 kg942 g
SKF3211 A-2ZDouble row angular contact ball bearing with seals or shields	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 33.3 mm 1.311024 in	61 kN	52 kN	6300 rpm	6300 rpm	0.942 kg942 g
SKF3211 A-2Z/C3Double row angular contact ball bearing with seals or shields	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 33.3 mm 1.311024 in	61 kN	52 kN	6300 rpm	6300 rpm	0.942 kg942 g
SKF3211 A-2Z/C3MT33Double row angular contact ball bearing with seals or shields	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 33.3 mm 1.311024 in	61 kN	52 kN	6300 rpm	6300 rpm	0.942 kg942 g
SKF3211 A-2Z/MT33Double row angular contact ball bearing with seals or shields	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 33.3 mm 1.311024 in	61 kN	52 kN	6300 rpm	6300 rpm	0.942 kg942 g
SKF3211 A/C3Double row angular contact ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 33.3 mm 1.311024 in	61 kN	52 kN	6300 rpm	6300 rpm	0.954 kg954 g
SKF3211 ATN9Double row angular contact ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 33.3 mm 1.311024 in	61 kN	52 kN	6300 rpm	6300 rpm	0.933 kg933 g
FAG3211-BD-XLAngular contact ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 33.3 mm 1.311024 in	61 kN	51 kN	7200 rpm	7100 rpm	0.957 kg957 g
FAG3211-BD-XL-2HRSAngular contact ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 33.3 mm 1.311024 in	61 kN	51 kN	—	5300 rpm	0.98 kg980 g
FAG3211-BD-XL-2HRS-C3Angular contact ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 33.3 mm 1.311024 in	61 kN	51 kN	—	5300 rpm	0.98 kg980 g
FAG3211-BD-XL-2HRS-TVHAngular contact ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 33.3 mm 1.311024 in	61 kN	51 kN	—	5300 rpm	0.95 kg950 g
FAG3211-BD-XL-2HRS-TVH-C3Angular contact ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 33.3 mm 1.311024 in	61 kN	51 kN	—	5300 rpm	0.95 kg950 g
FAG3211-BD-XL-2ZAngular contact ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 33.3 mm 1.311024 in	61 kN	51 kN	7200 rpm	5300 rpm	0.98 kg980 g
FAG3211-BD-XL-2Z-C3Angular contact ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 33.3 mm 1.311024 in	61 kN	51 kN	7200 rpm	5300 rpm	0.98 kg980 g
FAG3211-BD-XL-2Z-TVHAngular contact ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 33.3 mm 1.311024 in	61 kN	51 kN	7200 rpm	5300 rpm	0.95 kg950 g
FAG3211-BD-XL-2Z-TVH-C3Angular contact ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 33.3 mm 1.311024 in	61 kN	51 kN	7200 rpm	5300 rpm	0.95 kg950 g
FAG3211-BD-XL-C3Angular contact ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 33.3 mm 1.311024 in	61 kN	51 kN	7200 rpm	7100 rpm	0.961 kg961 g
FAG3211-BD-XL-TVHAngular contact ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 33.3 mm 1.311024 in	61 kN	51 kN	7200 rpm	7100 rpm	0.93 kg930 g
FAG3211-BD-XL-TVH-C2Angular contact ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 33.3 mm 1.311024 in	61 kN	51 kN	7200 rpm	7100 rpm	0.93 kg930 g
FAG3211-BD-XL-TVH-C3Angular contact ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 33.3 mm 1.311024 in	61 kN	51 kN	7200 rpm	7100 rpm	0.93 kg930 g
FAG3211-BD-XL-TVH-L285Angular contact ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 33.3 mm 1.311024 in	61 kN	51 kN	7200 rpm	7100 rpm	0.929 kg929 g
FAG3211-BD-XL-TVH-L285-C3Angular contact ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 33.3 mm 1.311024 in	61 kN	51 kN	7200 rpm	7100 rpm	0.922 kg922 g

Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designation	Closure	Original precision	Clearance	Cage	Material	Lubricant
KOYO 3211	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
SKF 3211 A	Without	Not recorded	Not recorded	Sheet metal	Bearing steel	None
SKF 3211 A-2RS1	Seal on both sides	Not recorded	Not recorded	Sheet metal	Bearing steel	Grease
SKF 3211 A-2RS1/C3	Seal on both sides	Not recorded	Not recorded	Sheet metal	Bearing steel	Grease
SKF 3211 A-2RS1/MT33	Seal on both sides	Not recorded	Not recorded	Sheet metal	Bearing steel	Grease
SKF 3211 A-2Z	Shield on both sides	Not recorded	Not recorded	Sheet metal	Bearing steel	Grease
SKF 3211 A-2Z/C3	Shield on both sides	Not recorded	Not recorded	Sheet metal	Bearing steel	Grease
SKF 3211 A-2Z/C3MT33	Shield on both sides	Not recorded	Not recorded	Sheet metal	Bearing steel	Grease
SKF 3211 A-2Z/MT33	Shield on both sides	Not recorded	Not recorded	Sheet metal	Bearing steel	Grease
SKF 3211 A/C3	Without	Not recorded	Not recorded	Sheet metal	Bearing steel	None
SKF 3211 ATN9	Without	Not recorded	Not recorded	Non-metallic	Bearing steel	None
FAG 3211-BD-XL	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	Not recorded	JH — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 3211-BD-XL-2HRS	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	Not recorded	JH — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 3211-BD-XL-2HRS-C3	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	Not recorded	JH — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 3211-BD-XL-2HRS-TVH	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	Not recorded	TVH — Solid cage made of glass-fiber reinforced polyamide PA66	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 3211-BD-XL-2HRS-TVH-C3	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	Not recorded	TVH — Solid cage made of glass-fiber reinforced polyamide PA66	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 3211-BD-XL-2Z	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	Not recorded	JH — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 3211-BD-XL-2Z-C3	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	Not recorded	JH — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 3211-BD-XL-2Z-TVH	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	Not recorded	TVH — Solid cage made of glass-fiber reinforced polyamide PA66	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 3211-BD-XL-2Z-TVH-C3	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	Not recorded	TVH — Solid cage made of glass-fiber reinforced polyamide PA66	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 3211-BD-XL-C3	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	Not recorded	JH — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 3211-BD-XL-TVH	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	Not recorded	TVH — Solid cage made of glass-fiber reinforced polyamide PA66	Not recorded	Without — Bearing not greased
FAG 3211-BD-XL-TVH-C2	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	Not recorded	TVH — Solid cage made of glass-fiber reinforced polyamide PA66	Not recorded	Without — Bearing not greased
FAG 3211-BD-XL-TVH-C3	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	Not recorded	TVH — Solid cage made of glass-fiber reinforced polyamide PA66	Not recorded	Without — Bearing not greased
FAG 3211-BD-XL-TVH-L285	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	Not recorded	TVH — Solid cage made of glass-fiber reinforced polyamide PA66	Not recorded	L285 — Grease (L285/customer specific)
FAG 3211-BD-XL-TVH-L285-C3	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	Not recorded	TVH — Solid cage made of glass-fiber reinforced polyamide PA66	Not recorded	L285 — Grease (L285/customer specific)

How to compare these values

Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.

Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

3211

Angular contact ball bearing

View full technical record →SKF