99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

3208 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 3208. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

3208 dimensions and recorded technical data

The recorded 3208 base designation measures 40×80×30.2 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 40 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
KOYO3208Angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
52.4 kN43.9 kN—5000 rpmLimiting Speeds(Grease Lub.): 5000 min-1Limiting Speeds(Oil Lub.): 6700 min-10.65 kg650 g
SKF3208 ADouble row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
48 kN36.5 kN9000 rpm8000 rpm0.59 kg590 g
SKF3208 A-2RS1Double row angular contact ball bearing with seals or shields
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
48 kN36.5 kN—5600 rpm0.595 kg595 g
SKF3208 A-2RS1/C3Double row angular contact ball bearing with seals or shields
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
48 kN36.5 kN—5600 rpm0.595 kg595 g
SKF3208 A-2RS1/C3LVT114F7Double row angular contact ball bearing with seals or shields
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
48 kN36.5 kN—5600 rpm0.595 kg595 g
SKF3208 A-2RS1/C3W64Double row angular contact ball bearing with seals or shields
Recorded bore (d)
40 mm
1.574803 in
Recorded outside dimension (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
30.2 mm
1.188976 in
48 kN36.5 kN—2000 rpm0.595 kg595 g
SKF3208 A-2RS1/MT33Double row angular contact ball bearing with seals or shields
Recorded bore (d)
40 mm
1.574803 in
Recorded outside dimension (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
30.2 mm
1.188976 in
48 kN36.5 kN—5600 rpm0.595 kg595 g
SKF3208 A-2RS1NR/W64Double row angular contact ball bearing
Recorded bore (d)
40 mm
1.574803 in
Recorded outside dimension (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
30.2 mm
1.188976 in
48 kN36.5 kN—2000 rpm0.614 kg614 g
SKF3208 A-2RS1TN9/C3MT33Double row angular contact ball bearing with seals or shields
Recorded bore (d)
40 mm
1.574803 in
Recorded outside dimension (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
30.2 mm
1.188976 in
48 kN36.5 kN—5600 rpm0.585 kg585 g
SKF3208 A-2RS1TN9/MT33Double row angular contact ball bearing with seals or shields
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
48 kN36.5 kN—5600 rpm0.585 kg585 g
SKF3208 A-2RS1/W64Double row angular contact ball bearing with seals or shields
Recorded bore (d)
40 mm
1.574803 in
Recorded outside dimension (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
30.2 mm
1.188976 in
48 kN36.5 kN—2000 rpm0.595 kg595 g
SKF3208 A-2ZDouble row angular contact ball bearing with seals or shields
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
48 kN36.5 kN9000 rpm8000 rpm0.601 kg601 g
SKF3208 A-2Z/C3Double row angular contact ball bearing with seals or shields
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
48 kN36.5 kN9000 rpm8000 rpm0.601 kg601 g
SKF3208 A-2Z/C3MT33Double row angular contact ball bearing with seals or shields
Recorded bore (d)
40 mm
1.574803 in
Recorded outside dimension (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
30.2 mm
1.188976 in
48 kN36.5 kN9000 rpm8000 rpm0.601 kg601 g
SKF3208 A-2Z/MT33Double row angular contact ball bearing with seals or shields
Recorded bore (d)
40 mm
1.574803 in
Recorded outside dimension (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
30.2 mm
1.188976 in
48 kN36.5 kN9000 rpm8000 rpm0.601 kg601 g
SKF3208 A-2ZTN9/C3GE2Double row angular contact ball bearing with seals or shields
Recorded bore (d)
40 mm
1.574803 in
Recorded outside dimension (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
30.2 mm
1.188976 in
48 kN36.5 kN9000 rpm8000 rpm0.587 kg587 g
SKF3208 A-2ZTN9/MT33Double row angular contact ball bearing with seals or shields
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
48 kN36.5 kN9000 rpm8000 rpm0.587 kg587 g
SKF3208 A/C3Double row angular contact ball bearing
Recorded bore (d)
40 mm
1.574803 in
Recorded outside dimension (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
30.2 mm
1.188976 in
48 kN36.5 kN9000 rpm8000 rpm0.59 kg590 g
SKF3208 ATN9Double row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
48 kN36.5 kN9000 rpm8000 rpm0.569 kg569 g
SKF3208 ATN9/C3Double row angular contact ball bearing
Recorded bore (d)
40 mm
1.574803 in
Recorded outside dimension (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
30.2 mm
1.188976 in
48 kN36.5 kN9000 rpm8000 rpm0.569 kg569 g
SKF3208 A-ZDouble row angular contact ball bearing with seals or shields
Recorded bore (d)
40 mm
1.574803 in
Recorded outside dimension (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
30.2 mm
1.188976 in
44.9 kN34 kN9000 rpm8000 rpm0.587 kg587 g
SKF3208 A-Z/C3Double row angular contact ball bearing with seals or shields
Recorded bore (d)
40 mm
1.574803 in
Recorded outside dimension (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
30.2 mm
1.188976 in
44.9 kN34 kN9000 rpm8000 rpm0.581 kg581 g
FAG3208-BD-XLAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
51 kN38 kN9100 rpm8900 rpm0.593 kg593 g
FAG3208-BD-XL-2HRSAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
51 kN38 kN—6700 rpm0.605 kg605 g
FAG3208-BD-XL-2HRS-C3Angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
51 kN38 kN—6700 rpm0.605 kg605 g
FAG3208-BD-XL-2HRS-L055-C3Angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
51 kN38 kN—6700 rpm0.605 kg605 g
FAG3208-BD-XL-2HRS-TVHAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
51 kN38 kN—6700 rpm0.592 kg592 g
FAG3208-BD-XL-2HRS-TVH-C3Angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
51 kN38 kN—6700 rpm0.592 kg592 g
FAG3208-BD-XL-2HRS-TVH-L427Angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
51 kN38 kN—6700 rpm0.592 kg592 g
FAG3208-BD-XL-2ZAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
51 kN38 kN9100 rpm6700 rpm0.604 kg604 g
FAG3208-BD-XL-2Z-C3Angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
51 kN38 kN9100 rpm6700 rpm0.604 kg604 g
FAG3208-BD-XL-2Z-TVHAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
51 kN38 kN9100 rpm6700 rpm0.59 kg590 g
FAG3208-BD-XL-2Z-TVH-C3Angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
51 kN38 kN9100 rpm6700 rpm0.59 kg590 g
FAG3208-BD-XL-C3Angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
51 kN38 kN9100 rpm8900 rpm0.593 kg593 g
FAG3208-BD-XL-TVHAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
51 kN38 kN9100 rpm8900 rpm0.579 kg579 g
FAG3208-BD-XL-TVH-C2Angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
51 kN38 kN9100 rpm8900 rpm0.579 kg579 g
FAG3208-BD-XL-TVH-C3Angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
51 kN38 kN9100 rpm8900 rpm0.579 kg579 g
FAG3208-BD-XL-TVH-L285Angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
51 kN38 kN9100 rpm8900 rpm0.579 kg579 g
FAG3208-BD-XL-TVH-L285-C3Angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
51 kN38 kN9100 rpm8900 rpm0.579 kg579 g
FAG3208-BD-XL-ZAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
30.2 mm
1.188976 in
51 kN38 kN9100 rpm8900 rpm0.598 kg598 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
KOYO 3208OpenNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 3208 AWithoutNot recordedNot recordedSheet metalBearing steelNone
SKF 3208 A-2RS1Seal on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3208 A-2RS1/C3Seal on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3208 A-2RS1/C3LVT114F7Seal on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3208 A-2RS1/C3W64Seal on both sidesNot recordedNot recordedSheet metalBearing steelSolid Oil
SKF 3208 A-2RS1/MT33Seal on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3208 A-2RS1NR/W64Seal on both sidesNot recordedNot recordedSheet metalBearing steelSolid Oil
SKF 3208 A-2RS1TN9/C3MT33Seal on both sidesNot recordedNot recordedNon-metallicBearing steelGrease
SKF 3208 A-2RS1TN9/MT33Seal on both sidesNot recordedNot recordedNon-metallicBearing steelGrease
SKF 3208 A-2RS1/W64Seal on both sidesNot recordedNot recordedSheet metalBearing steelSolid Oil
SKF 3208 A-2ZShield on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3208 A-2Z/C3Shield on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3208 A-2Z/C3MT33Shield on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3208 A-2Z/MT33Shield on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3208 A-2ZTN9/C3GE2Shield on both sidesNot recordedNot recordedNon-metallicBearing steelGrease
SKF 3208 A-2ZTN9/MT33Shield on both sidesNot recordedNot recordedNon-metallicBearing steelGrease
SKF 3208 A/C3WithoutNot recordedNot recordedSheet metalBearing steelNone
SKF 3208 ATN9WithoutNot recordedNot recordedNon-metallicBearing steelNone
SKF 3208 ATN9/C3WithoutNot recordedNot recordedNon-metallicBearing steelNone
SKF 3208 A-ZShield on one sideNot recordedNot recordedSheet metalBearing steelNone
SKF 3208 A-Z/C3Shield on one sideNot recordedNot recordedSheet metalBearing steelNone
FAG 3208-BD-XLWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 3208-BD-XL-2HRS2HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 3208-BD-XL-2HRS-C32HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 3208-BD-XL-2HRS-L055-C32HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedL055 — Grease (L055/customer specific)
FAG 3208-BD-XL-2HRS-TVH2HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3208-BD-XL-2HRS-TVH-C32HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3208-BD-XL-2HRS-TVH-L4272HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedL427 — Grease (L427/customer specific)
FAG 3208-BD-XL-2Z2Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 3208-BD-XL-2Z-C32Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 3208-BD-XL-2Z-TVH2Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3208-BD-XL-2Z-TVH-C32Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3208-BD-XL-C3Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 3208-BD-XL-TVHWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 3208-BD-XL-TVH-C2Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 3208-BD-XL-TVH-C3Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 3208-BD-XL-TVH-L285Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedL285 — Grease (L285/customer specific)
FAG 3208-BD-XL-TVH-L285-C3Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedL285 — Grease (L285/customer specific)
FAG 3208-BD-XL-ZZ — Non-contact shield on one SideP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedWithout — Bearing not greased

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

3208

Angular contact ball bearing

View full technical record →FAG

32084-XL

Tapered roller bearing

View full technical record →SKF

3208 A

Double row angular contact ball bearing

View full technical record →SKF

3208 A-2RS1

Double row angular contact ball bearing with seals or shields

View full technical record →SKF

3208 A-2RS1/C3

Double row angular contact ball bearing with seals or shields

View full technical record →SKF

3208 A-2RS1/C3LVT114F7

Double row angular contact ball bearing with seals or shields

View full technical record →SKF

3208 A-2RS1/C3W64

Double row angular contact ball bearing with seals or shields

View full technical record →SKF

3208 A-2RS1/MT33

Double row angular contact ball bearing with seals or shields

View full technical record →SKF

3208 A-2RS1NR/W64

Double row angular contact ball bearing

View full technical record →SKF

3208 A-2RS1TN9/C3MT33

Double row angular contact ball bearing with seals or shields

View full technical record →SKF

3208 A-2RS1TN9/MT33

Double row angular contact ball bearing with seals or shields

View full technical record →SKF

3208 A-2RS1/W64

Double row angular contact ball bearing with seals or shields

View full technical record →
Filter all 41 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search