99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

3207 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 3207. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

3207 dimensions and recorded technical data

The recorded 3207 base designation measures 35×72×27 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 35 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
KOYO3207Angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
46 kN37.5 kN—5600 rpmLimiting Speeds(Grease Lub.): 5600 min-1Limiting Speeds(Oil Lub.): 7500 min-10.48 kg480 g
SKF3207 ADouble row angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
40.5 kN30 kN9000 rpm9000 rpm0.452 kg452 g
SKF3207 A-2RS1Double row angular contact ball bearing with seals or shields
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
40.5 kN30 kN—6300 rpm0.455 kg455 g
SKF3207 A-2RS1/C3Double row angular contact ball bearing with seals or shields
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
40.5 kN30 kN—6300 rpm0.455 kg455 g
SKF3207 A-2RS1/MT33Double row angular contact ball bearing with seals or shields
Recorded bore (d)
35 mm
1.377953 in
Recorded outside dimension (D)
72 mm
2.834646 in
Catalogue width (symbol unverified)
27 mm
1.062992 in
40.5 kN30 kN—6300 rpm0.455 kg455 g
SKF3207 A-2RS1TN9/MT33Double row angular contact ball bearing with seals or shields
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
40.5 kN30 kN—6300 rpm0.444 kg444 g
SKF3207 A-2RS1/VT143Double row angular contact ball bearing with seals or shields
Recorded bore (d)
35 mm
1.377953 in
Recorded outside dimension (D)
72 mm
2.834646 in
Catalogue width (symbol unverified)
27 mm
1.062992 in
40.5 kN30 kN—6300 rpm0.455 kg455 g
SKF3207 A-2RS1/W64Double row angular contact ball bearing with seals or shields
Recorded bore (d)
35 mm
1.377953 in
Recorded outside dimension (D)
72 mm
2.834646 in
Catalogue width (symbol unverified)
27 mm
1.062992 in
40.5 kN30 kN—2100 rpm0.455 kg455 g
SKF3207 A-2ZDouble row angular contact ball bearing with seals or shields
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
40.5 kN30 kN9000 rpm9000 rpm0.456 kg456 g
SKF3207 A-2Z/C3Double row angular contact ball bearing with seals or shields
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
40.5 kN30 kN9000 rpm9000 rpm0.456 kg456 g
SKF3207 A-2Z/C3MT33Double row angular contact ball bearing with seals or shields
Recorded bore (d)
35 mm
1.377953 in
Recorded outside dimension (D)
72 mm
2.834646 in
Catalogue width (symbol unverified)
27 mm
1.062992 in
40.5 kN30 kN9000 rpm9000 rpm0.456 kg456 g
SKF3207 A-2Z/LHT64Double row angular contact ball bearing with seals or shields
Recorded bore (d)
35 mm
1.377953 in
Recorded outside dimension (D)
72 mm
2.834646 in
Catalogue width (symbol unverified)
27 mm
1.062992 in
40.5 kN30 kN9000 rpm9000 rpm0.456 kg456 g
SKF3207 A-2Z/MT33Double row angular contact ball bearing with seals or shields
Recorded bore (d)
35 mm
1.377953 in
Recorded outside dimension (D)
72 mm
2.834646 in
Catalogue width (symbol unverified)
27 mm
1.062992 in
40.5 kN30 kN9000 rpm9000 rpm0.456 kg456 g
SKF3207 A-2ZTN9/C3MT33Double row angular contact ball bearing with seals or shields
Recorded bore (d)
35 mm
1.377953 in
Recorded outside dimension (D)
72 mm
2.834646 in
Catalogue width (symbol unverified)
27 mm
1.062992 in
40.5 kN30 kN9000 rpm9000 rpm0.447 kg447 g
SKF3207 A-2ZTN9/MT33Double row angular contact ball bearing with seals or shields
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
40.5 kN30 kN9000 rpm9000 rpm0.447 kg447 g
SKF3207 A/C3Double row angular contact ball bearing
Recorded bore (d)
35 mm
1.377953 in
Recorded outside dimension (D)
72 mm
2.834646 in
Catalogue width (symbol unverified)
27 mm
1.062992 in
40.5 kN30 kN9000 rpm9000 rpm0.452 kg452 g
SKF3207 ATN9Double row angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
40.5 kN30 kN9000 rpm9000 rpm0.434 kg434 g
SKF3207 ATN9/C2Double row angular contact ball bearing
Recorded bore (d)
35 mm
1.377953 in
Recorded outside dimension (D)
72 mm
2.834646 in
Catalogue width (symbol unverified)
27 mm
1.062992 in
40.5 kN30 kN9000 rpm9000 rpm0.434 kg434 g
SKF3207 ATN9/C3Double row angular contact ball bearing
Recorded bore (d)
35 mm
1.377953 in
Recorded outside dimension (D)
72 mm
2.834646 in
Catalogue width (symbol unverified)
27 mm
1.062992 in
40.5 kN30 kN9000 rpm9000 rpm0.434 kg434 g
FAG3207-BD-XLAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
41 kN30 kN9900 rpm10100 rpm0.442 kg442 g
FAG3207-BD-XL-2HRSAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
41 kN30 kN—7600 rpm0.453 kg453 g
FAG3207-BD-XL-2HRS-C3Angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
41 kN30 kN—7600 rpm0.453 kg453 g
FAG3207-BD-XL-2HRS-L140-C3Angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
41 kN30 kN—7600 rpm0.453 kg453 g
FAG3207-BD-XL-2HRS-TVHAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
41 kN30 kN—7600 rpm0.44 kg440 g
FAG3207-BD-XL-2HRS-TVH-C3Angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
41 kN30 kN—7600 rpm0.44 kg440 g
FAG3207-BD-XL-2ZAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
41 kN30 kN9900 rpm7600 rpm0.451 kg451 g
FAG3207-BD-XL-2Z-C3Angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
41 kN30 kN9900 rpm7600 rpm0.451 kg451 g
FAG3207-BD-XL-2Z-TVHAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
41 kN30 kN9900 rpm7600 rpm0.438 kg438 g
FAG3207-BD-XL-2Z-TVH-C3Angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
41 kN30 kN9900 rpm7600 rpm0.438 kg438 g
FAG3207-BD-XL-C3Angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
41 kN30 kN9900 rpm10100 rpm0.442 kg442 g
FAG3207-BD-XL-TVHAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
41 kN30 kN9900 rpm10100 rpm0.43 kg430 g
FAG3207-BD-XL-TVH-C3Angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
41 kN30 kN9900 rpm10100 rpm0.43 kg430 g
FAG3207-BD-XL-TVH-L140-C3Angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
41 kN30 kN9900 rpm10100 rpm0.444 kg444 g
FAG3207-BD-XL-TVH-L285Angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
41 kN30 kN9900 rpm10100 rpm0.43 kg430 g
FAG3207-BD-XL-TVH-L285-C3Angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
72 mm
2.834646 in
Width (B)
27 mm
1.062992 in
41 kN30 kN9900 rpm10100 rpm0.43 kg430 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
KOYO 3207OpenNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 3207 AWithoutNot recordedNot recordedSheet metalBearing steelNone
SKF 3207 A-2RS1Seal on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3207 A-2RS1/C3Seal on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3207 A-2RS1/MT33Seal on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3207 A-2RS1TN9/MT33Seal on both sidesNot recordedNot recordedNon-metallicBearing steelGrease
SKF 3207 A-2RS1/VT143Seal on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3207 A-2RS1/W64Seal on both sidesNot recordedNot recordedSheet metalBearing steelSolid Oil
SKF 3207 A-2ZShield on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3207 A-2Z/C3Shield on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3207 A-2Z/C3MT33Shield on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3207 A-2Z/LHT64Shield on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3207 A-2Z/MT33Shield on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3207 A-2ZTN9/C3MT33Shield on both sidesNot recordedNot recordedNon-metallicBearing steelGrease
SKF 3207 A-2ZTN9/MT33Shield on both sidesNot recordedNot recordedNon-metallicBearing steelGrease
SKF 3207 A/C3WithoutNot recordedNot recordedSheet metalBearing steelNone
SKF 3207 ATN9WithoutNot recordedNot recordedNon-metallicBearing steelNone
SKF 3207 ATN9/C2WithoutNot recordedNot recordedNon-metallicBearing steelNone
SKF 3207 ATN9/C3WithoutNot recordedNot recordedNon-metallicBearing steelNone
FAG 3207-BD-XLWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 3207-BD-XL-2HRS2HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 3207-BD-XL-2HRS-C32HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 3207-BD-XL-2HRS-L140-C32HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedL140 — Grease (L140/customer specific)
FAG 3207-BD-XL-2HRS-TVH2HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3207-BD-XL-2HRS-TVH-C32HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3207-BD-XL-2Z2Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 3207-BD-XL-2Z-C32Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 3207-BD-XL-2Z-TVH2Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3207-BD-XL-2Z-TVH-C32Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3207-BD-XL-C3Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 3207-BD-XL-TVHWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 3207-BD-XL-TVH-C3Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 3207-BD-XL-TVH-L140-C3Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedL140 — Grease (L140/customer specific)
FAG 3207-BD-XL-TVH-L285Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedL285 — Grease (L285/customer specific)
FAG 3207-BD-XL-TVH-L285-C3Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedL285 — Grease (L285/customer specific)

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

3207

Angular contact ball bearing

View full technical record →FAG

32076-XL

Tapered roller bearing

View full technical record →SKF

3207 A

Double row angular contact ball bearing

View full technical record →SKF

3207 A-2RS1

Double row angular contact ball bearing with seals or shields

View full technical record →SKF

3207 A-2RS1/C3

Double row angular contact ball bearing with seals or shields

View full technical record →SKF

3207 A-2RS1/MT33

Double row angular contact ball bearing with seals or shields

View full technical record →SKF

3207 A-2RS1TN9/MT33

Double row angular contact ball bearing with seals or shields

View full technical record →SKF

3207 A-2RS1/VT143

Double row angular contact ball bearing with seals or shields

View full technical record →SKF

3207 A-2RS1/W64

Double row angular contact ball bearing with seals or shields

View full technical record →SKF

3207 A-2Z

Double row angular contact ball bearing with seals or shields

View full technical record →SKF

3207 A-2Z/C3

Double row angular contact ball bearing with seals or shields

View full technical record →SKF

3207 A-2Z/C3MT33

Double row angular contact ball bearing with seals or shields

View full technical record →
Filter all 36 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search