Find · understand · compare
3206 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 3206. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
3206 dimensions and recorded technical data
The recorded 3206 base designation measures 30×62×23.8 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 46 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| KOYO3206Angular contact ball bearing |
| 34.1 kN | 27 kN | — | 6500 rpmLimiting Speeds(Grease Lub.): 6500 min-1Limiting Speeds(Oil Lub.): 8700 min-1 | 0.32 kg320 g |
| SKF3206 ADouble row angular contact ball bearing |
| 30.5 kN | 22 kN | 10000 rpm | 10000 rpm | 0.284 kg284 g |
| SKF3206 A-2RS1Double row angular contact ball bearing with seals or shields |
| 30.5 kN | 22 kN | — | 7500 rpm | 0.295 kg295 g |
| SKF3206 A-2RS1/C3Double row angular contact ball bearing with seals or shields |
| 30.5 kN | 22 kN | — | 7500 rpm | 0.295 kg295 g |
| SKF3206 A-2RS1/C3LVT114F7Double row angular contact ball bearing with seals or shields |
| 30.5 kN | 22 kN | — | 7500 rpm | 0.295 kg295 g |
| SKF3206 A-2RS1/MT33Double row angular contact ball bearing with seals or shields |
| 30.5 kN | 22 kN | — | 7500 rpm | 0.295 kg295 g |
| SKF3206 A-2RS1TN9/C3MT33Double row angular contact ball bearing with seals or shields |
| 30.5 kN | 22 kN | — | 7500 rpm | 0.283 kg283 g |
| SKF3206 A-2RS1TN9/LHT55Double row angular contact ball bearing with seals or shields |
| 30.5 kN | 22 kN | — | 7500 rpm | 0.295 kg295 g |
| SKF3206 A-2RS1TN9/MT33Double row angular contact ball bearing with seals or shields |
| 30.5 kN | 22 kN | — | 7500 rpm | 0.283 kg283 g |
| SKF3206 A-2RS1/W64Double row angular contact ball bearing with seals or shields |
| 30.5 kN | 22 kN | — | 2600 rpm | 0.295 kg295 g |
| SKF3206 A-2ZDouble row angular contact ball bearing with seals or shields |
| 30.5 kN | 22 kN | 10000 rpm | 10000 rpm | 0.297 kg297 g |
| SKF3206 A-2Z/C3Double row angular contact ball bearing with seals or shields |
| 30.5 kN | 22 kN | 10000 rpm | 10000 rpm | 0.297 kg297 g |
| SKF3206 A-2Z/C3MT33Double row angular contact ball bearing with seals or shields |
| 30.5 kN | 22 kN | 10000 rpm | 10000 rpm | 0.297 kg297 g |
| SKF3206 A-2Z/MT33Double row angular contact ball bearing with seals or shields |
| 30.5 kN | 22 kN | 10000 rpm | 10000 rpm | 0.297 kg297 g |
| SKF3206 A-2ZTN9/C3MT33Double row angular contact ball bearing with seals or shields |
| 30.5 kN | 22 kN | 10000 rpm | 10000 rpm | 0.292 kg292 g |
| SKF3206 A-2ZTN9/MT33Double row angular contact ball bearing with seals or shields |
| 30.5 kN | 22 kN | 10000 rpm | 10000 rpm | 0.292 kg292 g |
| SKF3206 A-2ZTN9/WTDouble row angular contact ball bearing with seals or shields |
| 30.5 kN | 22 kN | 10000 rpm | 10000 rpm | 0.292 kg292 g |
| SKF3206 A/C2Double row angular contact ball bearing |
| 30.5 kN | 22 kN | 10000 rpm | 10000 rpm | 0.284 kg284 g |
| SKF3206 A/C3Double row angular contact ball bearing |
| 30.5 kN | 22 kN | 10000 rpm | 10000 rpm | 0.284 kg284 g |
| SKF3206 ATN9Double row angular contact ball bearing |
| 30.5 kN | 22 kN | 10000 rpm | 10000 rpm | 0.278 kg278 g |
| SKF3206 ATN9/C3Double row angular contact ball bearing |
| 30.5 kN | 22 kN | 10000 rpm | 10000 rpm | 0.278 kg278 g |
| SKF3206 ATN9/P5Double row angular contact ball bearing |
| 28.6 kN | 20.4 kN | 9500 rpm | 10000 rpm | 0.278 kg278 g |
| SKF3206 ATN9/VQ537Double row angular contact ball bearing |
| 30.5 kN | 22 kN | 10000 rpm | 10000 rpm | 0.278 kg278 g |
| SKF3206 A/W64Double row angular contact ball bearing |
| 30.5 kN | 22 kN | — | 3200 rpm | 0.284 kg284 g |
| SKF3206 A-ZDouble row angular contact ball bearing with seals or shields |
| 30.5 kN | 22 kN | 10000 rpm | 10000 rpm | 0.261 kg261 g |
| SKF3206 CE-2RS1TN9Double row angular contact ball bearing with seals or shields |
| 29.1 kN | 20.8 kN | — | 7000 rpm | 0.289 kg289 g |
| FAG3206-BD-XLAngular contact ball bearing |
| 31 kN | 22.2 kN | 11100 rpm | 11900 rpm | 0.285 kg285 g |
| FAG3206-BD-XL-2HRSAngular contact ball bearing |
| 31 kN | 22.2 kN | — | 9000 rpm | 0.295 kg295 g |
| FAG3206-BD-XL-2HRS-C3Angular contact ball bearing |
| 31 kN | 22.2 kN | — | 9000 rpm | 0.295 kg295 g |
| FAG3206-BD-XL-2HRS-L138-C3Angular contact ball bearing |
| 31 kN | 22.2 kN | — | 9000 rpm | 0.294 kg294 g |
| FAG3206-BD-XL-2HRS-TVHAngular contact ball bearing |
| 31 kN | 22.2 kN | — | 9000 rpm | 0.286 kg286 g |
| FAG3206-BD-XL-2HRS-TVH-C2Angular contact ball bearing |
| 31 kN | 22.2 kN | — | 9000 rpm | 0.288 kg288 g |
| FAG3206-BD-XL-2HRS-TVH-C3Angular contact ball bearing |
| 31 kN | 22.2 kN | — | 9000 rpm | 0.286 kg286 g |
| FAG3206-BD-XL-2HRS-TVH-L207Angular contact ball bearing |
| 31 kN | 22.2 kN | — | 9000 rpm | 0.29 kg290 g |
| FAG3206-BD-XL-2ZAngular contact ball bearing |
| 31 kN | 22.2 kN | 11100 rpm | 9000 rpm | 0.297 kg297 g |
| FAG3206-BD-XL-2Z-C3Angular contact ball bearing |
| 31 kN | 22.2 kN | 11100 rpm | 9000 rpm | 0.297 kg297 g |
| FAG3206-BD-XL-2Z-TVHAngular contact ball bearing |
| 31 kN | 22.2 kN | 11100 rpm | 9000 rpm | 0.286 kg286 g |
| FAG3206-BD-XL-2Z-TVH-C3Angular contact ball bearing |
| 31 kN | 22.2 kN | 11100 rpm | 9000 rpm | 0.288 kg288 g |
| FAG3206-BD-XL-2Z-TVH-L069-C3Angular contact ball bearing |
| 31 kN | 22.2 kN | 11100 rpm | 9000 rpm | 0.288 kg288 g |
| FAG3206-BD-XL-C3Angular contact ball bearing |
| 31 kN | 22.2 kN | 11100 rpm | 11900 rpm | 0.285 kg285 g |
| FAG3206-BD-XL-P5Angular contact ball bearing |
| 31 kN | 22.2 kN | 11100 rpm | 11900 rpm | 0.285 kg285 g |
| FAG3206-BD-XL-TVHAngular contact ball bearing |
| 31 kN | 22.2 kN | 11100 rpm | 11900 rpm | 0.278 kg278 g |
| FAG3206-BD-XL-TVH-C2Angular contact ball bearing |
| 31 kN | 22.2 kN | 11100 rpm | 11900 rpm | 0.278 kg278 g |
| FAG3206-BD-XL-TVH-C3Angular contact ball bearing |
| 31 kN | 22.2 kN | 11100 rpm | 11900 rpm | 0.278 kg278 g |
| FAG3206-BD-XL-TVH-L285Angular contact ball bearing |
| 31 kN | 22.2 kN | 11100 rpm | 11900 rpm | 0.281 kg281 g |
| FAG3206-BD-XL-TVH-L285-C3Angular contact ball bearing |
| 31 kN | 22.2 kN | 11100 rpm | 11900 rpm | 0.281 kg281 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| KOYO 3206 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 3206 A | Without | Not recorded | Not recorded | Sheet metal | Bearing steel | None |
| SKF 3206 A-2RS1 | Seal on both sides | Not recorded | Not recorded | Sheet metal | Bearing steel | Grease |
| SKF 3206 A-2RS1/C3 | Seal on both sides | Not recorded | Not recorded | Sheet metal | Bearing steel | Grease |
| SKF 3206 A-2RS1/C3LVT114F7 | Seal on both sides | Not recorded | Not recorded | Sheet metal | Bearing steel | Grease |
| SKF 3206 A-2RS1/MT33 | Seal on both sides | Not recorded | Not recorded | Sheet metal | Bearing steel | Grease |
| SKF 3206 A-2RS1TN9/C3MT33 | Seal on both sides | Not recorded | Not recorded | Non-metallic | Bearing steel | Grease |
| SKF 3206 A-2RS1TN9/LHT55 | Seal on both sides | Not recorded | Not recorded | Non-metallic | Bearing steel | Grease |
| SKF 3206 A-2RS1TN9/MT33 | Seal on both sides | Not recorded | Not recorded | Non-metallic | Bearing steel | Grease |
| SKF 3206 A-2RS1/W64 | Seal on both sides | Not recorded | Not recorded | Sheet metal | Bearing steel | Solid Oil |
| SKF 3206 A-2Z | Shield on both sides | Not recorded | Not recorded | Sheet metal | Bearing steel | Grease |
| SKF 3206 A-2Z/C3 | Shield on both sides | Not recorded | Not recorded | Sheet metal | Bearing steel | Grease |
| SKF 3206 A-2Z/C3MT33 | Shield on both sides | Not recorded | Not recorded | Sheet metal | Bearing steel | Grease |
| SKF 3206 A-2Z/MT33 | Shield on both sides | Not recorded | Not recorded | Sheet metal | Bearing steel | Grease |
| SKF 3206 A-2ZTN9/C3MT33 | Shield on both sides | Not recorded | Not recorded | Non-metallic | Bearing steel | Grease |
| SKF 3206 A-2ZTN9/MT33 | Shield on both sides | Not recorded | Not recorded | Non-metallic | Bearing steel | Grease |
| SKF 3206 A-2ZTN9/WT | Shield on both sides | Not recorded | Not recorded | Non-metallic | Bearing steel | Grease |
| SKF 3206 A/C2 | Without | Not recorded | Not recorded | Sheet metal | Bearing steel | None |
| SKF 3206 A/C3 | Without | Not recorded | Not recorded | Sheet metal | Bearing steel | None |
| SKF 3206 ATN9 | Without | Not recorded | Not recorded | Non-metallic | Bearing steel | None |
| SKF 3206 ATN9/C3 | Without | Not recorded | Not recorded | Non-metallic | Bearing steel | None |
| SKF 3206 ATN9/P5 | Without | Not recorded | Not recorded | Non-metallic | Bearing steel | None |
| SKF 3206 ATN9/VQ537 | Without | Not recorded | Not recorded | Non-metallic | Bearing steel | None |
| SKF 3206 A/W64 | Without | Not recorded | Not recorded | Sheet metal | Bearing steel | Solid Oil |
| SKF 3206 A-Z | Shield on one side | Not recorded | Not recorded | Sheet metal | Bearing steel | None |
| SKF 3206 CE-2RS1TN9 | Seal on both sides | Not recorded | Not recorded | Non-metallic | Bearing steel | None |
| FAG 3206-BD-XL | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | JH — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 3206-BD-XL-2HRS | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | Not recorded | JH — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 3206-BD-XL-2HRS-C3 | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | Not recorded | JH — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 3206-BD-XL-2HRS-L138-C3 | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | Not recorded | JH — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 3206-BD-XL-2HRS-TVH | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | Not recorded | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 3206-BD-XL-2HRS-TVH-C2 | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | Not recorded | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 3206-BD-XL-2HRS-TVH-C3 | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | Not recorded | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 3206-BD-XL-2HRS-TVH-L207 | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | Not recorded | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 3206-BD-XL-2Z | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | Not recorded | JH — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 3206-BD-XL-2Z-C3 | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | Not recorded | JH — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 3206-BD-XL-2Z-TVH | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | Not recorded | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 3206-BD-XL-2Z-TVH-C3 | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | Not recorded | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 3206-BD-XL-2Z-TVH-L069-C3 | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | Not recorded | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 3206-BD-XL-C3 | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | JH — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 3206-BD-XL-P5 | Without — Not sealed | P5 — Class 5 (ISO 492:2023) | Not recorded | JH — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 3206-BD-XL-TVH | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 | Not recorded | Without — Bearing not greased |
| FAG 3206-BD-XL-TVH-C2 | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 | Not recorded | Without — Bearing not greased |
| FAG 3206-BD-XL-TVH-C3 | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 | Not recorded | Without — Bearing not greased |
| FAG 3206-BD-XL-TVH-L285 | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 | Not recorded | L285 — Grease (L285/customer specific) |
| FAG 3206-BD-XL-TVH-L285-C3 | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 | Not recorded | L285 — Grease (L285/customer specific) |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
KOYO
3206
Angular contact ball bearing
View full technical record →KOYO32060JR
Tapered roller bearing
View full technical record →FAG32060-X
Tapered roller bearing
View full technical record →TIMKEN32060X
Tapered roller bearing
View full technical record →SKF32060 X
Single row tapered roller bearing
View full technical record →SKF32060 X/DFC500
Matched tapered roller bearings arranged face-to-face
View full technical record →SKF32060 X/L4BDFC410
Matched tapered roller bearings arranged face-to-face
View full technical record →FAG32060-X-XL
Tapered roller bearing
View full technical record →FAG32060-X-XL-J30PC
Tapered roller bearing
View full technical record →KOYO32064JR
Tapered roller bearing
View full technical record →SKF32064T220 X/DB
Matched tapered roller bearings arranged back-to-back
View full technical record →TIMKEN32064X
Tapered roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.