32056 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 32056. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
32056 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 14 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF32056T196 X/DBMatched tapered roller bearings arranged back-to-back |
| 2050 kN | 4750 kN | 800 rpm | 1300 rpm | 86.5 kg86500 g |
| SKF32056T199 X/DBMatched tapered roller bearings arranged back-to-back |
| 2208 kN | 4750 kN | 800 rpm | 1300 rpm | 85.8 kg85800 g |
| SKF32056 XSingle row tapered roller bearing |
| 1288 kN | 2360 kN | 1000 rpm | 1300 rpm | 40.6 kg40600 g |
| SKF32056 X/DFMatched tapered roller bearings arranged face-to-face |
| 2208 kN | 4750 kN | 800 rpm | 1300 rpm | 84.3 kg84300 g |
| SKF32056 X/DFC330Matched tapered roller bearings arranged face-to-face |
| 2208 kN | 4750 kN | 800 rpm | 1300 rpm | 84.3 kg84300 g |
| SKF32056 X/DFC500Matched tapered roller bearings arranged face-to-face |
| 2208 kN | 4750 kN | 800 rpm | 1300 rpm | 84 kg84000 g |
| SKF32056 X/DFC890Matched tapered roller bearings arranged face-to-face |
| 2208 kN | 4750 kN | 800 rpm | 1300 rpm | 84.3 kg84300 g |
| FAG32056-XTapered roller bearing |
| 1200 kN | 2300 kN | 840 rpm | 1510 rpm | 40.5 kg40500 g |
| FAG32056-X>ATapered roller bearing |
| 1200 kN | 2300 kN | 840 rpm | 1510 rpm | 40.02 kg40020 g |
| FAG32056-X-XLTapered roller bearing |
| 1420 kN | 2300 kN | 840 rpm | 1830 rpm | 39.9 kg39900 g |
| FAG32056-X-XL-P5Tapered roller bearing |
| 1420 kN | 2300 kN | 840 rpm | 1830 rpm | 40.3 kg40300 g |
| TIMKEN32056XTapered roller bearing |
| 1380 kN | 2620 kN | — | — | 40.3 kg40300 g |
| TIMKEN32056X-90KA1Tapered roller bearing |
| 1730 kN | 2620 kN | — | — | 40.25 kg40250 g |
| KOYO32056JRTapered roller bearing |
| 1510 kN | 2280 kN | — | 720 rpmLimiting Speeds(Grease Lub.): 720 min-1Limiting Speeds(Oil Lub.): 960 min-1 | 41.7 kg41700 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 32056T196 X/DB | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32056T199 X/DB | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32056 X | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32056 X/DF | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32056 X/DFC330 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32056 X/DFC500 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32056 X/DFC890 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| FAG 32056-X | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32056-X>A | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32056-X-XL | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32056-X-XL-P5 | Not recorded | P5 — Class 5 (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| TIMKEN 32056X | Open | ABMA Class K | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 32056X-90KA1 | Open | ABMA Class K | Not recorded | Steel cage | Not recorded | Not recorded |
| KOYO 32056JR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
32056JR
Tapered roller bearing
View full technical record →SKF32056T196 X/DB
Matched tapered roller bearings arranged back-to-back
View full technical record →SKF32056T199 X/DB
Matched tapered roller bearings arranged back-to-back
View full technical record →FAG32056-X
Tapered roller bearing
View full technical record →TIMKEN32056X
Tapered roller bearing
View full technical record →SKF32056 X
Single row tapered roller bearing
View full technical record →TIMKEN32056X-90KA1
Tapered roller bearing
View full technical record →FAG32056-X>A
Tapered roller bearing
View full technical record →SKF32056 X/DF
Matched tapered roller bearings arranged face-to-face
View full technical record →SKF32056 X/DFC330
Matched tapered roller bearings arranged face-to-face
View full technical record →SKF32056 X/DFC500
Matched tapered roller bearings arranged face-to-face
View full technical record →SKF32056 X/DFC890
Matched tapered roller bearings arranged face-to-face
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.