99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

3205 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 3205. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

3205 dimensions and recorded technical data

The recorded 3205 base designation measures 25×52×20.6 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 43 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
KOYO3205Angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
23.7 kN18.2 kN—7800 rpmLimiting Speeds(Grease Lub.): 7800 min-1Limiting Speeds(Oil Lub.): 10000 min-10.19 kg190 g
SKF3205 ADouble row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.3 kN12000 rpm12000 rpm0.172 kg172 g
SKF3205 A-2RS1Double row angular contact ball bearing with seals or shields
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.3 kN—8500 rpm0.181 kg181 g
SKF3205 A-2RS1/C3Double row angular contact ball bearing with seals or shields
Recorded bore (d)
25 mm
0.984252 in
Recorded outside dimension (D)
52 mm
2.047244 in
Catalogue width (symbol unverified)
20.6 mm
0.811024 in
22 kN15.3 kN—8500 rpm0.181 kg181 g
SKF3205 A-2RS1/C3LVT114F7Double row angular contact ball bearing with seals or shields
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.3 kN—8500 rpm0.181 kg181 g
SKF3205 A-2RS1/MT33Double row angular contact ball bearing with seals or shields
Recorded bore (d)
25 mm
0.984252 in
Recorded outside dimension (D)
52 mm
2.047244 in
Catalogue width (symbol unverified)
20.6 mm
0.811024 in
22 kN15.3 kN—8500 rpm0.181 kg181 g
SKF3205 A-2RS1TN9/C3VT114Double row angular contact ball bearing with seals or shields
Recorded bore (d)
25 mm
0.984252 in
Recorded outside dimension (D)
52 mm
2.047244 in
Catalogue width (symbol unverified)
20.6 mm
0.811024 in
20.8 kN14.3 kN—8500 rpm0.173 kg173 g
SKF3205 A-2RS1TN9/MT33Double row angular contact ball bearing with seals or shields
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.3 kN—8500 rpm0.173 kg173 g
SKF3205 A-2RS1/W64Double row angular contact ball bearing with seals or shields
Recorded bore (d)
25 mm
0.984252 in
Recorded outside dimension (D)
52 mm
2.047244 in
Catalogue width (symbol unverified)
20.6 mm
0.811024 in
22 kN15.3 kN—3000 rpm0.181 kg181 g
SKF3205 A-2ZDouble row angular contact ball bearing with seals or shields
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.3 kN12000 rpm12000 rpm0.181 kg181 g
SKF3205 A-2Z/C3Double row angular contact ball bearing with seals or shields
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.3 kN12000 rpm12000 rpm0.181 kg181 g
SKF3205 A-2Z/C3MT33Double row angular contact ball bearing with seals or shields
Recorded bore (d)
25 mm
0.984252 in
Recorded outside dimension (D)
52 mm
2.047244 in
Catalogue width (symbol unverified)
20.6 mm
0.811024 in
22 kN15.3 kN12000 rpm12000 rpm0.181 kg181 g
SKF3205 A-2Z/MT33Double row angular contact ball bearing with seals or shields
Recorded bore (d)
25 mm
0.984252 in
Recorded outside dimension (D)
52 mm
2.047244 in
Catalogue width (symbol unverified)
20.6 mm
0.811024 in
22 kN15.3 kN12000 rpm12000 rpm0.181 kg181 g
SKF3205 A-2ZTN9/C3MT33Double row angular contact ball bearing with seals or shields
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.3 kN12000 rpm12000 rpm0.173 kg173 g
SKF3205 A-2ZTN9/C3VT113Double row angular contact ball bearing with seals or shields
Recorded bore (d)
25 mm
0.984252 in
Recorded outside dimension (D)
52 mm
2.047244 in
Catalogue width (symbol unverified)
20.6 mm
0.811024 in
22 kN15.3 kN12000 rpm12000 rpm0.173 kg173 g
SKF3205 A-2ZTN9/MT33Double row angular contact ball bearing with seals or shields
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.3 kN12000 rpm12000 rpm0.173 kg173 g
SKF3205 A/C3Double row angular contact ball bearing
Recorded bore (d)
25 mm
0.984252 in
Recorded outside dimension (D)
52 mm
2.047244 in
Catalogue width (symbol unverified)
20.6 mm
0.811024 in
22 kN15.3 kN12000 rpm12000 rpm0.172 kg172 g
SKF3205 A-RS1ZTN9/MT33Double row angular contact ball bearing with seals or shields
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.3 kN—8500 rpm0.173 kg173 g
SKF3205 ATN9Double row angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.3 kN12000 rpm12000 rpm0.169 kg169 g
SKF3205 ATN9/C2Double row angular contact ball bearing
Recorded bore (d)
25 mm
0.984252 in
Recorded outside dimension (D)
52 mm
2.047244 in
Catalogue width (symbol unverified)
20.6 mm
0.811024 in
22 kN15.3 kN12000 rpm12000 rpm0.169 kg169 g
SKF3205 ATN9/C3Double row angular contact ball bearing
Recorded bore (d)
25 mm
0.984252 in
Recorded outside dimension (D)
52 mm
2.047244 in
Catalogue width (symbol unverified)
20.6 mm
0.811024 in
22 kN15.3 kN12000 rpm12000 rpm0.169 kg169 g
FAG3205-BD-XLAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.2 kN12500 rpm14300 rpm0.169 kg169 g
FAG3205-BD-XL-2HRSAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.2 kN—10700 rpm0.176 kg176 g
FAG3205-BD-XL-2HRS-C3Angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.2 kN—10700 rpm0.172 kg172 g
FAG3205-BD-XL-2HRS-TVHAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.2 kN—10700 rpm0.172 kg172 g
FAG3205-BD-XL-2HRS-TVH-C2Angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.2 kN—10700 rpm0.172 kg172 g
FAG3205-BD-XL-2HRS-TVH-C3Angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.2 kN—10700 rpm0.172 kg172 g
FAG3205-BD-XL-2HRS-TVH-C4Angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.2 kN—10700 rpm0.173 kg173 g
FAG3205-BD-XL-2HRS-TVH-L114-C3Angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.2 kN—10700 rpm0.172 kg172 g
FAG3205-BD-XL-2HRS-TVH-L195-A40-73Angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.2 kN—10700 rpm0.175 kg175 g
FAG3205-BD-XL-2ZAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.2 kN12500 rpm10700 rpm0.176 kg176 g
FAG3205-BD-XL-2Z-C3Angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.2 kN12500 rpm10700 rpm0.176 kg176 g
FAG3205-BD-XL-2Z-TVHAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.2 kN12500 rpm10700 rpm0.171 kg171 g
FAG3205-BD-XL-2Z-TVH-C2Angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.2 kN12500 rpm10700 rpm0.175 kg175 g
FAG3205-BD-XL-2Z-TVH-C3Angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.2 kN12500 rpm10700 rpm0.171 kg171 g
FAG3205-BD-XL-C3Angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.2 kN12500 rpm14300 rpm0.169 kg169 g
FAG3205-BD-XL-TVHAngular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.2 kN12500 rpm14300 rpm0.164 kg164 g
FAG3205-BD-XL-TVH-C2Angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.2 kN12500 rpm14300 rpm0.166 kg166 g
FAG3205-BD-XL-TVH-C3Angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.2 kN12500 rpm14300 rpm0.164 kg164 g
FAG3205-BD-XL-TVH-L285Angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.2 kN12500 rpm14300 rpm0.169 kg169 g
FAG3205-BD-XL-TVH-L285-C2Angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.2 kN12500 rpm14300 rpm0.169 kg169 g
FAG3205-BD-XL-TVH-L285-C3Angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.2 kN12500 rpm14300 rpm0.172 kg172 g
FAG3205-BD-XL-TVH-P5Angular contact ball bearing
Bore diameter (d)
25 mm
0.984252 in
Outside diameter (D)
52 mm
2.047244 in
Width (B)
20.6 mm
0.811024 in
22 kN15.2 kN12500 rpm14300 rpm0.166 kg166 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
KOYO 3205OpenNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 3205 AWithoutNot recordedNot recordedSheet metalBearing steelNone
SKF 3205 A-2RS1Seal on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3205 A-2RS1/C3Seal on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3205 A-2RS1/C3LVT114F7Seal on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3205 A-2RS1/MT33Seal on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3205 A-2RS1TN9/C3VT114Seal on both sidesNot recordedNot recordedNon-metallicBearing steelGrease
SKF 3205 A-2RS1TN9/MT33Seal on both sidesNot recordedNot recordedNon-metallicBearing steelGrease
SKF 3205 A-2RS1/W64Seal on both sidesNot recordedNot recordedSheet metalBearing steelSolid Oil
SKF 3205 A-2ZShield on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3205 A-2Z/C3Shield on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3205 A-2Z/C3MT33Shield on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3205 A-2Z/MT33Shield on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3205 A-2ZTN9/C3MT33Shield on both sidesNot recordedNot recordedNon-metallicBearing steelGrease
SKF 3205 A-2ZTN9/C3VT113Shield on both sidesNot recordedNot recordedNon-metallicBearing steelGrease
SKF 3205 A-2ZTN9/MT33Shield on both sidesNot recordedNot recordedNon-metallicBearing steelGrease
SKF 3205 A/C3WithoutNot recordedNot recordedSheet metalBearing steelNone
SKF 3205 A-RS1ZTN9/MT33Seal on one side, shield on the otherNot recordedNot recordedNon-metallicBearing steelGrease
SKF 3205 ATN9WithoutNot recordedNot recordedNon-metallicBearing steelNone
SKF 3205 ATN9/C2WithoutNot recordedNot recordedNon-metallicBearing steelNone
SKF 3205 ATN9/C3WithoutNot recordedNot recordedNon-metallicBearing steelNone
FAG 3205-BD-XLWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 3205-BD-XL-2HRS2HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 3205-BD-XL-2HRS-C32HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 3205-BD-XL-2HRS-TVH2HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3205-BD-XL-2HRS-TVH-C22HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3205-BD-XL-2HRS-TVH-C32HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3205-BD-XL-2HRS-TVH-C42HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3205-BD-XL-2HRS-TVH-L114-C32HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedL114 — Grease (L114/customer specific)
FAG 3205-BD-XL-2HRS-TVH-L195-A40-732HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedL195 — Grease (L195/customer specific)
FAG 3205-BD-XL-2Z2Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 3205-BD-XL-2Z-C32Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 3205-BD-XL-2Z-TVH2Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3205-BD-XL-2Z-TVH-C22Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3205-BD-XL-2Z-TVH-C32Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3205-BD-XL-C3Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 3205-BD-XL-TVHWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 3205-BD-XL-TVH-C2Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 3205-BD-XL-TVH-C3Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 3205-BD-XL-TVH-L285Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedL285 — Grease (L285/customer specific)
FAG 3205-BD-XL-TVH-L285-C2Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedL285 — Grease (L285/customer specific)
FAG 3205-BD-XL-TVH-L285-C3Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedL285 — Grease (L285/customer specific)
FAG 3205-BD-XL-TVH-P5Without — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

3205

Angular contact ball bearing

View full technical record →KOYO

32052JR

Tapered roller bearing

View full technical record →SKF

32052T189 X/DB

Matched tapered roller bearings arranged back-to-back

View full technical record →SKF

32052T189 X/DBC280

Matched tapered roller bearings arranged back-to-back

View full technical record →SKF

32052T194 X/DB

Matched tapered roller bearings arranged back-to-back

View full technical record →TIMKEN

32052X

Tapered roller bearing

View full technical record →SKF

32052 X

Single row tapered roller bearing

View full technical record →FAG

32052-X>A

Tapered roller bearing

View full technical record →SKF

32052 X/DF

Matched tapered roller bearings arranged face-to-face

View full technical record →FAG

32052-X-XL

Tapered roller bearing

View full technical record →FAG

32052-X-XL-J30PC

Tapered roller bearing

View full technical record →FAG

32052-X-XL-P5

Tapered roller bearing

View full technical record →
Filter all 68 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search