Find · understand · compare
32048 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 32048. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
32048 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 22 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF32048T164 X/DBMatched tapered roller bearings arranged back-to-back |
| 1695 kN | 3550 kN | 950 rpm | 1600 rpm | 54.5 kg54500 g |
| SKF32048T164 X/DBC406Matched tapered roller bearings arranged back-to-back |
| 1695 kN | 3550 kN | 950 rpm | 1600 rpm | 56.2 kg56200 g |
| SKF32048T172 X/DBMatched tapered roller bearings arranged back-to-back |
| 1570 kN | 3550 kN | 950 rpm | 1600 rpm | 56.2 kg56200 g |
| SKF32048 XSingle row tapered roller bearing |
| 989 kN | 1800 kN | 1200 rpm | 1600 rpm | 25.9 kg25900 g |
| SKF32048 X/DFMatched tapered roller bearings arranged face-to-face |
| 1695 kN | 3550 kN | 950 rpm | 1600 rpm | 54.5 kg54500 g |
| SKF32048 X/DFC205Matched tapered roller bearings arranged face-to-face |
| 1695 kN | 3550 kN | 950 rpm | 1600 rpm | 54.3 kg54300 g |
| SKF32048 X/DFC720Matched tapered roller bearings arranged face-to-face |
| 1695 kN | 3550 kN | 950 rpm | 1600 rpm | 54.5 kg54500 g |
| FAG32048-XTapered roller bearing |
| 900 kN | 1680 kN | 1060 rpm | 1780 rpm | 26.2 kg26200 g |
| FAG32048-X>ATapered roller bearing |
| 900 kN | 1680 kN | 1060 rpm | 1780 rpm | 25.9 kg25900 g |
| FAG32048-X-RTapered roller bearing |
| 900 kN | 1680 kN | 1060 rpm | 1780 rpm | 26.9 kg26900 g |
| FAG32048-X-XLTapered roller bearing |
| 1060 kN | 1680 kN | 1060 rpm | 2150 rpm | 25.8 kg25800 g |
| FAG32048-X-XL-DF-A300-350Tapered roller bearing set |
| 1820 kN | 3350 kN | 870 rpm | 2150 rpm | 54 kg54000 g |
| FAG32048-X-XL-DF-A400-450Tapered roller bearing set |
| 1820 kN | 3350 kN | 870 rpm | 2150 rpm | 54 kg54000 g |
| FAG32048-X-XL-DF-A450-500Tapered roller bearing set |
| 1820 kN | 3350 kN | 870 rpm | 2150 rpm | 54 kg54000 g |
| FAG32048-X-XL-DF-A470-520Tapered roller bearing set |
| 1820 kN | 3350 kN | 870 rpm | 2150 rpm | 53.5 kg53500 g |
| FAG32048-X-XL-DF-A700-750Tapered roller bearing set |
| 1820 kN | 3350 kN | 870 rpm | 2150 rpm | 54 kg54000 g |
| FAG32048-X-XL-DF-J30PC-A500-550Tapered roller bearing set |
| 1820 kN | 3350 kN | 870 rpm | 2150 rpm | 53.6 kg53600 g |
| FAG32048-X-XL-J20AATapered roller bearing |
| 1060 kN | 1680 kN | 1060 rpm | 2150 rpm | 26.2 kg26200 g |
| FAG32048-X-XL-J30PCTapered roller bearing |
| 1060 kN | 1680 kN | 1060 rpm | 2150 rpm | 25.8 kg25800 g |
| FAG32048-X-XL-P5Tapered roller bearing |
| 1060 kN | 1680 kN | 1060 rpm | 2150 rpm | 25.8 kg25800 g |
| TIMKEN32048XTapered roller bearing |
| 1180 kN | 1940 kN | — | — | 25.73 kg25730 g |
| KOYO32048JRTapered roller bearing |
| 1160 kN | 1720 kN | — | 870 rpmLimiting Speeds(Grease Lub.): 870 min-1Limiting Speeds(Oil Lub.): 1200 min-1 | 26.8 kg26800 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 32048T164 X/DB | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32048T164 X/DBC406 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32048T172 X/DB | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32048 X | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32048 X/DF | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32048 X/DFC205 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32048 X/DFC720 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| FAG 32048-X | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32048-X>A | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32048-X-R | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32048-X-XL | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32048-X-XL-DF-A300-350 | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32048-X-XL-DF-A400-450 | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32048-X-XL-DF-A450-500 | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32048-X-XL-DF-A470-520 | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32048-X-XL-DF-A700-750 | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32048-X-XL-DF-J30PC-A500-550 | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32048-X-XL-J20AA | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32048-X-XL-J30PC | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32048-X-XL-P5 | Not recorded | P5 — Class 5 (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| TIMKEN 32048X | Open | ABMA Class K | Not recorded | Steel cage | Not recorded | Not recorded |
| KOYO 32048JR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
KOYO
32048JR
Tapered roller bearing
View full technical record →SKF32048T164 X/DB
Matched tapered roller bearings arranged back-to-back
View full technical record →SKF32048T164 X/DBC406
Matched tapered roller bearings arranged back-to-back
View full technical record →SKF32048T172 X/DB
Matched tapered roller bearings arranged back-to-back
View full technical record →FAG32048-X
Tapered roller bearing
View full technical record →TIMKEN32048X
Tapered roller bearing
View full technical record →SKF32048 X
Single row tapered roller bearing
View full technical record →FAG32048-X>A
Tapered roller bearing
View full technical record →SKF32048 X/DF
Matched tapered roller bearings arranged face-to-face
View full technical record →SKF32048 X/DFC205
Matched tapered roller bearings arranged face-to-face
View full technical record →SKF32048 X/DFC720
Matched tapered roller bearings arranged face-to-face
View full technical record →FAG32048-X-R
Tapered roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.