32024 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 32024. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
32024 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 20 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF32024T84 X/DB31C200Matched tapered roller bearings arranged back-to-back |
| 513 kN | 830 kN | 2200 rpm | 3400 rpm | 6.85 kg6850 g |
| SKF32024T84 X/DBC200Matched tapered roller bearings arranged back-to-back |
| 513 kN | 830 kN | 2200 rpm | 3400 rpm | 6.85 kg6850 g |
| SKF32024T86 X/DBC195Matched tapered roller bearings arranged back-to-back |
| 513 kN | 830 kN | 2200 rpm | 3400 rpm | 6.95 kg6950 g |
| SKF32024T86 X/DBC419Matched tapered roller bearings arranged back-to-back |
| 513 kN | 830 kN | 2200 rpm | 3400 rpm | 7.02 kg7020 g |
| SKF32024 XSingle row tapered roller bearing |
| 299 kN | 415 kN | 2800 rpm | 3400 rpm | 3.29 kg3290 g |
| SKF32024 X/DFMatched tapered roller bearings arranged face-to-face |
| 513 kN | 830 kN | 2200 rpm | 3400 rpm | 6.77 kg6770 g |
| SKF32024 X/DFC205Matched tapered roller bearings arranged face-to-face |
| 513 kN | 830 kN | 2200 rpm | 3400 rpm | 6.77 kg6770 g |
| SKF32024 X/DFC350Matched tapered roller bearings arranged face-to-face |
| 513 kN | 830 kN | 2200 rpm | 3400 rpm | 6.75 kg6750 g |
| SKF32024 X/P5Single row tapered roller bearing |
| 299 kN | 415 kN | 2800 rpm | 3400 rpm | 3.28 kg3280 g |
| FAG32024-XTapered roller bearing |
| 250 kN | 420 kN | 2460 rpm | 3700 rpm | 3.26 kg3260 g |
| FAG32024-X-HTapered roller bearing |
| 238 kN | 420 kN | 2460 rpm | 2960 rpm | 3.28 kg3280 g |
| FAG32024-X-XLTapered roller bearing |
| 310 kN | 420 kN | 2460 rpm | 4450 rpm | 3.335 kg3335 g |
| FAG32024-X-XL>ATapered roller bearing |
| 310 kN | 420 kN | 2460 rpm | 4450 rpm | 3.27 kg3270 g |
| FAG32024-X-XL>BTapered roller bearing |
| 310 kN | 420 kN | 2460 rpm | 4450 rpm | 3.27 kg3270 g |
| FAG32024-X-XL-J30PCTapered roller bearing |
| 310 kN | 420 kN | 2460 rpm | 4450 rpm | 3.27 kg3270 g |
| FAG32024-X-XL-P4Tapered roller bearing |
| 310 kN | 420 kN | 2460 rpm | 4450 rpm | 3.26 kg3260 g |
| FAG32024-X-XL-P5Tapered roller bearing |
| 310 kN | 420 kN | 2460 rpm | 4450 rpm | 3.26 kg3260 g |
| TIMKEN32024XTapered roller bearing |
| 292 kN | 466 kN | — | — | 3.27 kg3270 g |
| TIMKEN32024X-9X246Tapered roller bearing |
| 347 kN | 466 kN | — | — | 3.26 kg3260 g |
| KOYO32024JRTapered roller bearing |
| 325 kN | 427 kN | — | 2000 rpmLimiting Speeds(Grease Lub.): 2000 min-1Limiting Speeds(Oil Lub.): 2600 min-1 | 3.34 kg3340 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 32024T84 X/DB31C200 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32024T84 X/DBC200 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32024T86 X/DBC195 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32024T86 X/DBC419 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32024 X | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32024 X/DF | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32024 X/DFC205 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32024 X/DFC350 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32024 X/P5 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| FAG 32024-X | Not recorded | P6X — Class 6X (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32024-X-H | Not recorded | P6X — Class 6X (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32024-X-XL | Not recorded | P6X — Class 6X (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32024-X-XL>A | Not recorded | P6X — Class 6X (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32024-X-XL>B | Not recorded | P6X — Class 6X (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32024-X-XL-J30PC | Not recorded | P6X — Class 6X (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32024-X-XL-P4 | Not recorded | P4 — Class 4 (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32024-X-XL-P5 | Not recorded | P5 — Class 5 (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| TIMKEN 32024X | Open | ABMA Class K | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 32024X-9X246 | Open | ABMA Class N | Not recorded | Steel cage | Not recorded | Not recorded |
| KOYO 32024JR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
32024JR
Tapered roller bearing
View full technical record →SKF32024T84 X/DB31C200
Matched tapered roller bearings arranged back-to-back
View full technical record →SKF32024T84 X/DBC200
Matched tapered roller bearings arranged back-to-back
View full technical record →SKF32024T86 X/DBC195
Matched tapered roller bearings arranged back-to-back
View full technical record →SKF32024T86 X/DBC419
Matched tapered roller bearings arranged back-to-back
View full technical record →FAG32024-X
Tapered roller bearing
View full technical record →TIMKEN32024X
Tapered roller bearing
View full technical record →SKF32024 X
Single row tapered roller bearing
View full technical record →TIMKEN32024X-9X246
Tapered roller bearing
View full technical record →SKF32024 X/DF
Matched tapered roller bearings arranged face-to-face
View full technical record →SKF32024 X/DFC205
Matched tapered roller bearings arranged face-to-face
View full technical record →SKF32024 X/DFC350
Matched tapered roller bearings arranged face-to-face
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.