32021 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 32021. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
32021 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 14 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF32021 XSingle row tapered roller bearing |
| 248 kN | 335 kN | 3200 rpm | 3800 rpm | 2.44 kg2440 g |
| SKF32021 X/DFMatched tapered roller bearings arranged face-to-face |
| 426 kN | 670 kN | 2600 rpm | 3800 rpm | 5.03 kg5030 g |
| SKF32021 X/DFC150Matched tapered roller bearings arranged face-to-face |
| 426 kN | 670 kN | 2600 rpm | 3800 rpm | 5.03 kg5030 g |
| FAG32021-X-HTapered roller bearing |
| 192 kN | 330 kN | 2800 rpm | 3360 rpm | 2.45 kg2450 g |
| FAG32021-X-XLTapered roller bearing |
| 250 kN | 330 kN | 2800 rpm | 5100 rpm | 2.362 kg2362 g |
| FAG32021-X-XL>ATapered roller bearing |
| 250 kN | 330 kN | 2800 rpm | 5100 rpm | 2.44 kg2440 g |
| FAG32021-X-XL>BTapered roller bearing |
| 250 kN | 330 kN | 2800 rpm | 5100 rpm | 2.44 kg2440 g |
| FAG32021-X-XL-DF-A0-35Tapered roller bearing set |
| 430 kN | 660 kN | 2650 rpm | 5100 rpm | 5.11 kg5110 g |
| FAG32021-X-XL-P5Tapered roller bearing |
| 250 kN | 330 kN | 2800 rpm | 5100 rpm | 2.362 kg2362 g |
| FAG32021-X-XL-S1Tapered roller bearing |
| 238 kN | 330 kN | 2800 rpm | 5100 rpm | 2.37 kg2370 g |
| TIMKEN32021XTapered roller bearing |
| 269 kN | 339 kN | — | — | 2.4 kg2400 g |
| TIMKEN32021X-99E60Tapered roller bearing |
| 269 kN | 339 kN | — | — | 2.4 kg2400 g |
| TIMKEN32021XSATapered roller bearing |
| 269 kN | 339 kN | — | — | 2.39 kg2390 g |
| KOYO32021JRTapered roller bearing |
| 270 kN | 344 kN | — | 2200 rpmLimiting Speeds(Grease Lub.): 2200 min-1Limiting Speeds(Oil Lub.): 3000 min-1 | 2.45 kg2450 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 32021 X | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32021 X/DF | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32021 X/DFC150 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| FAG 32021-X-H | Not recorded | P6X — Class 6X (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32021-X-XL | Not recorded | P6X — Class 6X (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32021-X-XL>A | Not recorded | P6X — Class 6X (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32021-X-XL>B | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| FAG 32021-X-XL-DF-A0-35 | Not recorded | P6X — Class 6X (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32021-X-XL-P5 | Not recorded | P5 — Class 5 (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32021-X-XL-S1 | Not recorded | P6X — Class 6X (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| TIMKEN 32021X | Open | ABMA Class K | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 32021X-99E60 | Open | ABMA Class K | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 32021XSA | Open | ABMA Class N | Not recorded | Steel cage | Not recorded | Not recorded |
| KOYO 32021JR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
32021JR
Tapered roller bearing
View full technical record →TIMKEN32021X
Tapered roller bearing
View full technical record →SKF32021 X
Single row tapered roller bearing
View full technical record →TIMKEN32021X-99E60
Tapered roller bearing
View full technical record →SKF32021 X/DF
Matched tapered roller bearings arranged face-to-face
View full technical record →SKF32021 X/DFC150
Matched tapered roller bearings arranged face-to-face
View full technical record →FAG32021-X-H
Tapered roller bearing
View full technical record →TIMKEN32021XSA
Tapered roller bearing
View full technical record →FAG32021-X-XL
Tapered roller bearing
View full technical record →FAG32021-X-XL>A
Tapered roller bearing
View full technical record →FAG32021-X-XL>B
Tapered roller bearing
View full technical record →FAG32021-X-XL-DF-A0-35
Tapered roller bearing set
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.