99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

3202 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 3202. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

3202 dimensions and recorded technical data

The recorded 3202 base designation measures 15×35×15.9 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 25 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
KOYO3202Angular contact ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
15.9 mm
0.625984 in
12.1 kN7.45 kN—12000 rpmLimiting Speeds(Grease Lub.): 12000 min-1Limiting Speeds(Oil Lub.): 16000 min-10.072 kg72 g
SKF3202 A-2RS1TN9Double row angular contact ball bearing with seals or shields
Recorded bore (d)
15 mm
0.590551 in
Recorded outside dimension (D)
35 mm
1.377953 in
Catalogue width (symbol unverified)
15.9 mm
0.625984 in
11.2 kN6.8 kN—14000 rpm0.066 kg66 g
SKF3202 A-2RS1TN9/C3W64Double row angular contact ball bearing with seals or shields
Recorded bore (d)
15 mm
0.590551 in
Recorded outside dimension (D)
35 mm
1.377953 in
Catalogue width (symbol unverified)
15.9 mm
0.625984 in
11.2 kN6.8 kN—1200 rpm0.066 kg66 g
SKF3202 A-2RS1TN9/MT33Double row angular contact ball bearing with seals or shields
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
15.9 mm
0.625984 in
11.2 kN6.8 kN—14000 rpm0.0643 kg64.3 g
SKF3202 A-2RS1TN9/W64Double row angular contact ball bearing with seals or shields
Recorded bore (d)
15 mm
0.590551 in
Recorded outside dimension (D)
35 mm
1.377953 in
Catalogue width (symbol unverified)
15.9 mm
0.625984 in
11.2 kN6.8 kN—1200 rpm0.07 kg70 g
SKF3202 A-2ZTN9/MT33Double row angular contact ball bearing with seals or shields
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
15.9 mm
0.625984 in
11.2 kN6.8 kN22000 rpm18000 rpm0.067 kg67 g
SKF3202 ATN9Double row angular contact ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
15.9 mm
0.625984 in
11.2 kN6.8 kN22000 rpm18000 rpm0.067 kg67 g
SKF3202 ATN9/C3Double row angular contact ball bearing
Recorded bore (d)
15 mm
0.590551 in
Recorded outside dimension (D)
35 mm
1.377953 in
Catalogue width (symbol unverified)
15.9 mm
0.625984 in
11.2 kN6.8 kN22000 rpm18000 rpm0.064 kg64 g
SKF3202 A-ZTN9Double row angular contact ball bearing with seals or shields
Recorded bore (d)
15 mm
0.590551 in
Recorded outside dimension (D)
35 mm
1.377953 in
Catalogue width (symbol unverified)
15.9 mm
0.625984 in
11.2 kN6.8 kN22000 rpm18000 rpm0.0647 kg64.7 g
FAG3202-BD-XLAngular contact ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
15.9 mm
0.625984 in
12.6 kN7.4 kN18500 rpm22300 rpm0.064 kg64 g
FAG3202-BD-XL-2HRSAngular contact ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
15.9 mm
0.625984 in
12.6 kN7.4 kN—16700 rpm0.066 kg66 g
FAG3202-BD-XL-2HRS-C3Angular contact ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
15.9 mm
0.625984 in
12.6 kN7.4 kN—16700 rpm0.066 kg66 g
FAG3202-BD-XL-2HRS-TVHAngular contact ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
15.9 mm
0.625984 in
12.6 kN7.4 kN—16700 rpm0.065 kg65 g
FAG3202-BD-XL-2HRS-TVH-C3Angular contact ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
15.9 mm
0.625984 in
12.6 kN7.4 kN—16700 rpm0.066 kg66 g
FAG3202-BD-XL-2ZAngular contact ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
15.9 mm
0.625984 in
12.6 kN7.4 kN18500 rpm16700 rpm0.066 kg66 g
FAG3202-BD-XL-2Z-C3Angular contact ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
15.9 mm
0.625984 in
12.6 kN7.4 kN18500 rpm16700 rpm0.066 kg66 g
FAG3202-BD-XL-2Z-TVHAngular contact ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
15.9 mm
0.625984 in
12.6 kN7.4 kN18500 rpm16700 rpm0.064 kg64 g
FAG3202-BD-XL-2Z-TVH-C2Angular contact ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
15.9 mm
0.625984 in
12.6 kN7.4 kN18500 rpm16700 rpm0.065 kg65 g
FAG3202-BD-XL-2Z-TVH-C3Angular contact ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
15.9 mm
0.625984 in
12.6 kN7.4 kN18500 rpm16700 rpm0.064 kg64 g
FAG3202-BD-XL-C3Angular contact ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
15.9 mm
0.625984 in
12.6 kN7.4 kN18500 rpm22300 rpm0.064 kg64 g
FAG3202-BD-XL-TVHAngular contact ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
15.9 mm
0.625984 in
12.6 kN7.4 kN18500 rpm22300 rpm0.062 kg62 g
FAG3202-BD-XL-TVH-C2Angular contact ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
15.9 mm
0.625984 in
12.6 kN7.4 kN18500 rpm22300 rpm0.062 kg62 g
FAG3202-BD-XL-TVH-C3Angular contact ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
15.9 mm
0.625984 in
12.6 kN7.4 kN18500 rpm22300 rpm0.062 kg62 g
FAG3202-BD-XL-TVH-L285Angular contact ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
15.9 mm
0.625984 in
12.6 kN7.4 kN18500 rpm22300 rpm0.063 kg63 g
FAG3202-BD-XL-TVH-L285-C3Angular contact ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
15.9 mm
0.625984 in
12.6 kN7.4 kN18500 rpm22300 rpm0.063 kg63 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
KOYO 3202OpenNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 3202 A-2RS1TN9Seal on both sidesNot recordedNot recordedNon-metallicBearing steelGrease
SKF 3202 A-2RS1TN9/C3W64Seal on both sidesNot recordedNot recordedNon-metallicBearing steelSolid Oil
SKF 3202 A-2RS1TN9/MT33Seal on both sidesNot recordedNot recordedNon-metallicBearing steelGrease
SKF 3202 A-2RS1TN9/W64Seal on both sidesNot recordedNot recordedNon-metallicBearing steelSolid Oil
SKF 3202 A-2ZTN9/MT33Shield on both sidesNot recordedNot recordedNon-metallicBearing steelGrease
SKF 3202 ATN9WithoutNot recordedNot recordedNon-metallicBearing steelNone
SKF 3202 ATN9/C3WithoutNot recordedNot recordedNon-metallicBearing steelNone
SKF 3202 A-ZTN9Shield on one sideNot recordedNot recordedNon-metallicBearing steelNone
FAG 3202-BD-XLWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 3202-BD-XL-2HRS2HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 3202-BD-XL-2HRS-C32HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 3202-BD-XL-2HRS-TVH2HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3202-BD-XL-2HRS-TVH-C32HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3202-BD-XL-2Z2Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 3202-BD-XL-2Z-C32Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 3202-BD-XL-2Z-TVH2Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3202-BD-XL-2Z-TVH-C22Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3202-BD-XL-2Z-TVH-C32Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3202-BD-XL-C3Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 3202-BD-XL-TVHWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 3202-BD-XL-TVH-C2Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 3202-BD-XL-TVH-C3Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 3202-BD-XL-TVH-L285Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedL285 — Grease (L285/customer specific)
FAG 3202-BD-XL-TVH-L285-C3Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedL285 — Grease (L285/customer specific)

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

3202

Angular contact ball bearing

View full technical record →KOYO

32020JR

Tapered roller bearing

View full technical record →SKF

32020T72 X/DB

Matched tapered roller bearings arranged back-to-back

View full technical record →FAG

32020-X

Tapered roller bearing

View full technical record →TIMKEN

32020X

Tapered roller bearing

View full technical record →SKF

32020 X

Single row tapered roller bearing

View full technical record →TIMKEN

32020X-99E60

Tapered roller bearing

View full technical record →FAG

32020-X>A

Tapered roller bearing

View full technical record →FAG

32020-X>B

Tapered roller bearing

View full technical record →TIMKEN

32020X CLC

Tapered roller bearing

View full technical record →SKF

32020 X/DF

Matched tapered roller bearings arranged face-to-face

View full technical record →SKF

32020 X/DFC140

Matched tapered roller bearings arranged face-to-face

View full technical record →
Filter all 136 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search