99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

32017 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 32017. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

32017 dimensions and recorded technical data

Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 17 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
SKF32017T66 X/DBMatched tapered roller bearings arranged back-to-back
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
130 mm
5.11811 in
Total width (T)
66 mm
2.598425 in
293 kN450 kN3200 rpm4800 rpm2.87 kg2870 g
SKF32017T66 X/QDBC280Matched tapered roller bearings arranged back-to-back
Recorded bore (d)
85 mm
3.346457 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
—
238 kN450 kN2800 rpm4800 rpm2.91 kg2910 g
SKF32017 XSingle row tapered roller bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
—
171 kN224 kN3800 rpm4800 rpm1.35 kg1350 g
SKF32017 X/DFMatched tapered roller bearings arranged face-to-face
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
130 mm
5.11811 in
Total width (T)
58 mm
2.283465 in
293 kN450 kN3200 rpm4800 rpm2.79 kg2790 g
SKF32017 X/DFC70Matched tapered roller bearings arranged face-to-face
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
130 mm
5.11811 in
Total width (T)
58 mm
2.283465 in
293 kN450 kN3200 rpm4800 rpm2.79 kg2790 g
SKF32017 X/P5Single row tapered roller bearing
Recorded bore (d)
85 mm
3.346457 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
—
171 kN224 kN3800 rpm4800 rpm1.36 kg1360 g
SKF32017 X/VA983Special single row tapered roller bearing
Recorded bore (d)
85 mm
3.346457 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
—
143 kN208 kN3600 rpm4800 rpm1.32 kg1320 g
FAG32017-X-HTapered roller bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
130 mm
5.11811 in
Width, inner ring (B)
29 mm
1.141732 in
Width, outer ring (C)
22 mm
0.866142 in
Width, total (T)
29 mm
1.141732 in
134 kN224 kN3300 rpm4160 rpm1.36 kg1360 g
FAG32017-X-RTapered roller bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
130 mm
5.11811 in
Width, inner ring (B)
29 mm
1.141732 in
Width, outer ring (C)
22 mm
0.866142 in
Width assembled flange bearing (TF)
12 mm
0.472441 in
138 kN216 kN3300 rpm5200 rpm1.36 kg1360 g
FAG32017-X-XLTapered roller bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
130 mm
5.11811 in
Width, inner ring (B)
29 mm
1.141732 in
Width, outer ring (C)
22 mm
0.866142 in
Width, total (T)
29 mm
1.141732 in
176 kN224 kN3250 rpm6300 rpm1.358 kg1358 g
FAG32017-X-XL>ATapered roller bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
130 mm
5.11811 in
Width, inner ring (B)
29 mm
1.141732 in
Width, outer ring (C)
22 mm
0.866142 in
Width, total (T)
29 mm
1.141732 in
176 kN224 kN3250 rpm6300 rpm1.36 kg1360 g
FAG32017-X-XL-DF-A0-35Tapered roller bearing set
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
130 mm
5.11811 in
Inner ring total width (2B)
58 mm
2.283465 in
Outer ring total width (2T)
58 mm
2.283465 in
300 kN450 kN3250 rpm6300 rpm2.8 kg2800 g
FAG32017-X-XL-P5Tapered roller bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
130 mm
5.11811 in
Width, inner ring (B)
29 mm
1.141732 in
Width, outer ring (C)
22 mm
0.866142 in
Width, total (T)
29 mm
1.141732 in
176 kN224 kN3250 rpm6300 rpm1.358 kg1358 g
FAG32017-X-XL-P5-DF-A80-100Tapered roller bearing set
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
130 mm
5.11811 in
Inner ring total width (2B)
58 mm
2.283465 in
Outer ring total width (2T)
58 mm
2.283465 in
300 kN450 kN3250 rpm6300 rpm2.768 kg2768 g
TIMKEN32017XTapered roller bearing
Recorded bore (d)
85 mm
3.346457 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
29 mm
1.141732 in
193 kN235 kN——1.33 kg1330 g
TIMKEN32017X-99E60Tapered roller bearing
Recorded bore (d)
85 mm
3.346457 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
29 mm
1.141732 in
193 kN235 kN——1.33 kg1330 g
KOYO32017JRTapered roller bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
29 mm
1.141732 in
189 kN234 kN—2800 rpmLimiting Speeds(Grease Lub.): 2800 min-1Limiting Speeds(Oil Lub.): 3700 min-11.38 kg1380 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
SKF 32017T66 X/DBWithoutNot recordedNot recordedSheet metalNot recordedNone
SKF 32017T66 X/QDBC280WithoutNot recordedNot recordedSheet metalNot recordedNone
SKF 32017 XWithoutNot recordedNot recordedSheet metalNot recordedNone
SKF 32017 X/DFWithoutNot recordedNot recordedSheet metalNot recordedNone
SKF 32017 X/DFC70WithoutNot recordedNot recordedSheet metalNot recordedNone
SKF 32017 X/P5WithoutNot recordedNot recordedSheet metalNot recordedNone
SKF 32017 X/VA983WithoutNot recordedNot recordedSheet metalNot recordedNone
FAG 32017-X-HNot recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32017-X-RNot recordedPN — Normal (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32017-X-XLNot recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32017-X-XL>ANot recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32017-X-XL-DF-A0-35Not recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32017-X-XL-P5Not recordedP5 — Class 5 (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32017-X-XL-P5-DF-A80-100Not recordedP5 — Class 5 (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
TIMKEN 32017XOpenABMA Class KNot recordedSteel cageNot recordedNot recorded
TIMKEN 32017X-99E60OpenABMA Class KNot recordedSteel cageNot recordedNot recorded
KOYO 32017JRNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

32017JR

Tapered roller bearing

View full technical record →SKF

32017T66 X/DB

Matched tapered roller bearings arranged back-to-back

View full technical record →SKF

32017T66 X/QDBC280

Matched tapered roller bearings arranged back-to-back

View full technical record →TIMKEN

32017X

Tapered roller bearing

View full technical record →SKF

32017 X

Single row tapered roller bearing

View full technical record →TIMKEN

32017X-99E60

Tapered roller bearing

View full technical record →SKF

32017 X/DF

Matched tapered roller bearings arranged face-to-face

View full technical record →SKF

32017 X/DFC70

Matched tapered roller bearings arranged face-to-face

View full technical record →FAG

32017-X-H

Tapered roller bearing

View full technical record →SKF

32017 X/P5

Single row tapered roller bearing

View full technical record →FAG

32017-X-R

Tapered roller bearing

View full technical record →SKF

32017 X/VA983

Special single row tapered roller bearing

View full technical record →
Filter all 17 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search