99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

32015 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 32015. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

32015 dimensions and recorded technical data

Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 12 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
SKF32015 XSingle row tapered roller bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
115 mm
4.527559 in
Catalogue width (symbol unverified)
—
130 kN163 kN4300 rpm5300 rpm0.904 kg904 g
SKF32015 X/P5VQ615Single row tapered roller bearing
Recorded bore (d)
75 mm
2.952756 in
Recorded outside dimension (D)
115 mm
4.527559 in
Catalogue width (symbol unverified)
—
130 kN163 kN4300 rpm5300 rpm0.91 kg910 g
FAG32015-XTapered roller bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
115 mm
4.527559 in
Width, inner ring (B)
25 mm
0.984252 in
Width, outer ring (C)
19 mm
0.748031 in
Width, total (T)
25 mm
0.984252 in
105 kN165 kN3600 rpm6000 rpm0.92 kg920 g
FAG32015-X>ATapered roller bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
115 mm
4.527559 in
Width, inner ring (B)
25 mm
0.984252 in
Width, outer ring (C)
19 mm
0.748031 in
Width, total (T)
25 mm
0.984252 in
105 kN165 kN3600 rpm6000 rpm0.92 kg920 g
FAG32015-X-HTapered roller bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
115 mm
4.527559 in
Width, inner ring (B)
25 mm
0.984252 in
Width, outer ring (C)
19 mm
0.748031 in
Width, total (T)
25 mm
0.984252 in
99.8 kN165 kN3600 rpm4800 rpm0.92 kg920 g
FAG32015-X-XLTapered roller bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
115 mm
4.527559 in
Width, inner ring (B)
25 mm
0.984252 in
Width, outer ring (C)
19 mm
0.748031 in
Width, total (T)
25 mm
0.984252 in
131 kN165 kN3600 rpm7200 rpm0.946 kg946 g
FAG32015-X-XL-P5Tapered roller bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
115 mm
4.527559 in
Width, inner ring (B)
25 mm
0.984252 in
Width, outer ring (C)
19 mm
0.748031 in
Width, total (T)
25 mm
0.984252 in
131 kN165 kN3600 rpm7200 rpm0.91 kg910 g
FAG32015-X-XL-S1Tapered roller bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
115 mm
4.527559 in
Width, inner ring (B)
25 mm
0.984252 in
Width, outer ring (C)
19 mm
0.748031 in
Width, total (T)
25 mm
0.984252 in
124 kN165 kN3600 rpm7200 rpm0.92 kg920 g
TIMKEN32015XTapered roller bearing
Recorded bore (d)
75 mm
2.952756 in
Recorded outside dimension (D)
115 mm
4.527559 in
Catalogue width (symbol unverified)
25 mm
0.984252 in
135 kN170 kN——0.91 kg910 g
TIMKEN32015X-99E60Tapered roller bearing
Recorded bore (d)
75 mm
2.952756 in
Recorded outside dimension (D)
115 mm
4.527559 in
Catalogue width (symbol unverified)
25 mm
0.984252 in
135 kN170 kN——0.91 kg910 g
TIMKEN32015X CLCTapered roller bearing
Recorded bore (d)
75 mm
2.952756 in
Recorded outside dimension (D)
115 mm
4.527559 in
Catalogue width (symbol unverified)
25 mm
0.984252 in
135 kN170 kN——0.91 kg910 g
KOYO32015JRTapered roller bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
115 mm
4.527559 in
Catalogue width (symbol unverified)
25 mm
0.984252 in
139 kN169 kN—3100 rpmLimiting Speeds(Grease Lub.): 3100 min-1Limiting Speeds(Oil Lub.): 4200 min-10.93 kg930 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
SKF 32015 XWithoutNot recordedNot recordedSheet metalNot recordedNone
SKF 32015 X/P5VQ615WithoutNot recordedNot recordedSheet metalNot recordedNone
FAG 32015-XNot recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32015-X>ANot recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32015-X-HNot recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32015-X-XLNot recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32015-X-XL-P5Not recordedP5 — Class 5 (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32015-X-XL-S1Not recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
TIMKEN 32015XOpenABMA Class KNot recordedSteel cageNot recordedNot recorded
TIMKEN 32015X-99E60OpenABMA Class KNot recordedSteel cageNot recordedNot recorded
TIMKEN 32015X CLCOpenABMA Class CNot recordedSteel cageNot recordedNot recorded
KOYO 32015JRNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

32015JR

Tapered roller bearing

View full technical record →FAG

32015-X

Tapered roller bearing

View full technical record →TIMKEN

32015X

Tapered roller bearing

View full technical record →SKF

32015 X

Single row tapered roller bearing

View full technical record →TIMKEN

32015X-99E60

Tapered roller bearing

View full technical record →FAG

32015-X>A

Tapered roller bearing

View full technical record →TIMKEN

32015X CLC

Tapered roller bearing

View full technical record →FAG

32015-X-H

Tapered roller bearing

View full technical record →SKF

32015 X/P5VQ615

Single row tapered roller bearing

View full technical record →FAG

32015-X-XL

Tapered roller bearing

View full technical record →FAG

32015-X-XL-P5

Tapered roller bearing

View full technical record →FAG

32015-X-XL-S1

Tapered roller bearing

View full technical record →
Filter all 12 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search