99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

32013 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 32013. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

32013 dimensions and recorded technical data

Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 11 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
SKF32013 XSingle row tapered roller bearing
Bore diameter (d)
65 mm
2.559055 in
Outside diameter (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
—
103 kN127 kN5000 rpm6000 rpm0.629 kg629 g
SKF32013 X/U2CLNVA983Special single row tapered roller bearing
Recorded bore (d)
65 mm
2.559055 in
Recorded outside dimension (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
—
84.2 kN120 kN4500 rpm6000 rpm0.624 kg624 g
SKF32013 X/VA983Special single row tapered roller bearing
Recorded bore (d)
65 mm
2.559055 in
Recorded outside dimension (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
—
84.2 kN120 kN4500 rpm6000 rpm0.624 kg624 g
FAG32013-XDYTapered roller bearing
Bore diameter (d)
65 mm
2.559055 in
Outside diameter (D)
100 mm
3.937008 in
Width, inner ring (B)
23 mm
0.905512 in
Width, outer ring (C)
17.5 mm
0.688976 in
Width, total (T)
23 mm
0.905512 in
83 kN125 kN4150 rpm6900 rpm0.63 kg630 g
FAG32013-X-HTapered roller bearing
Bore diameter (d)
65 mm
2.559055 in
Outside diameter (D)
100 mm
3.937008 in
Width, inner ring (B)
23 mm
0.905512 in
Width, outer ring (C)
17.5 mm
0.688976 in
Width, total (T)
23 mm
0.905512 in
77.9 kN125 kN4150 rpm5440 rpm0.64 kg640 g
FAG32013-X-XLTapered roller bearing
Bore diameter (d)
65 mm
2.559055 in
Outside diameter (D)
100 mm
3.937008 in
Width, inner ring (B)
23 mm
0.905512 in
Width, outer ring (C)
17.5 mm
0.688976 in
Width, total (T)
23 mm
0.905512 in
102 kN125 kN4150 rpm8300 rpm0.64 kg640 g
FAG32013-X-XL-P5Tapered roller bearing
Bore diameter (d)
65 mm
2.559055 in
Outside diameter (D)
100 mm
3.937008 in
Width, inner ring (B)
23 mm
0.905512 in
Width, outer ring (C)
17.5 mm
0.688976 in
Width, total (T)
23 mm
0.905512 in
102 kN125 kN4150 rpm8300 rpm0.635 kg635 g
TIMKEN32013XTapered roller bearing
Recorded bore (d)
65 mm
2.559055 in
Recorded outside dimension (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
23 mm
0.905512 in
116 kN137 kN——0.64 kg640 g
TIMKEN32013X-99E60Tapered roller bearing
Recorded bore (d)
65 mm
2.559055 in
Recorded outside dimension (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
23 mm
0.905512 in
116 kN137 kN——0.64 kg640 g
TIMKEN32013XSATapered roller bearing
Recorded bore (d)
65 mm
2.559055 in
Recorded outside dimension (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
23 mm
0.905512 in
98 kN137 kN——0.64 kg640 g
KOYO32013JRTapered roller bearing
Bore diameter (d)
65 mm
2.559055 in
Outside diameter (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
23 mm
0.905512 in
113 kN137 kN—3600 rpmLimiting Speeds(Grease Lub.): 3600 min-1Limiting Speeds(Oil Lub.): 4800 min-10.664 kg664 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
SKF 32013 XWithoutNot recordedNot recordedSheet metalNot recordedNone
SKF 32013 X/U2CLNVA983WithoutNot recordedNot recordedSheet metalNot recordedNone
SKF 32013 X/VA983WithoutNot recordedNot recordedSheet metalNot recordedNone
FAG 32013-XDYNot recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32013-X-HNot recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32013-X-XLNot recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32013-X-XL-P5Not recordedP5 — Class 5 (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
TIMKEN 32013XOpenABMA Class KNot recordedSteel cageNot recordedNot recorded
TIMKEN 32013X-99E60OpenABMA Class KNot recordedSteel cageNot recordedNot recorded
TIMKEN 32013XSAOpenABMA Class KNot recordedSteel cageNot recordedNot recorded
KOYO 32013JRNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

32013JR

Tapered roller bearing

View full technical record →TIMKEN

32013X

Tapered roller bearing

View full technical record →SKF

32013 X

Single row tapered roller bearing

View full technical record →TIMKEN

32013X-99E60

Tapered roller bearing

View full technical record →FAG

32013-XDY

Tapered roller bearing

View full technical record →FAG

32013-X-H

Tapered roller bearing

View full technical record →TIMKEN

32013XSA

Tapered roller bearing

View full technical record →SKF

32013 X/U2CLNVA983

Special single row tapered roller bearing

View full technical record →SKF

32013 X/VA983

Special single row tapered roller bearing

View full technical record →FAG

32013-X-XL

Tapered roller bearing

View full technical record →FAG

32013-X-XL-P5

Tapered roller bearing

View full technical record →
Filter all 11 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search