99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

32011 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 32011. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

32011 dimensions and recorded technical data

Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 22 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
SKF32011 XSingle row tapered roller bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
—
99.4 kN116 kN5600 rpm7000 rpm0.557 kg557 g
SKF32011 X/P5Single row tapered roller bearing
Recorded bore (d)
55 mm
2.165354 in
Recorded outside dimension (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
—
99.4 kN116 kN5600 rpm7000 rpm0.56 kg560 g
SKF32011 X/VA983Special single row tapered roller bearing
Recorded bore (d)
55 mm
2.165354 in
Recorded outside dimension (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
—
81.7 kN110 kN5300 rpm7000 rpm0.554 kg554 g
SKF32011 X/VB206Single row tapered roller bearing
Recorded bore (d)
55 mm
2.165354 in
Recorded outside dimension (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
—
99.4 kN116 kN5600 rpm7000 rpm0.557 kg557 g
FAG32011-XTapered roller bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width, inner ring (B)
23 mm
0.905512 in
Width, outer ring (C)
17.5 mm
0.688976 in
Width, total (T)
23 mm
0.905512 in
81 kN118 kN4600 rpm7700 rpm0.561 kg561 g
FAG32011-XDYTapered roller bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width, inner ring (B)
23 mm
0.905512 in
Width, outer ring (C)
17.5 mm
0.688976 in
Width, total (T)
23 mm
0.905512 in
78 kN114 kN4700 rpm7700 rpm0.555 kg555 g
FAG32011-X-HTapered roller bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width, inner ring (B)
23 mm
0.905512 in
Width, outer ring (C)
17.5 mm
0.688976 in
Width, total (T)
23 mm
0.905512 in
77 kN118 kN4600 rpm6160 rpm0.57 kg570 g
FAG32011-X-S1Tapered roller bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width, inner ring (B)
23 mm
0.905512 in
Width, outer ring (C)
17.5 mm
0.688976 in
Width, total (T)
23 mm
0.905512 in
81 kN118 kN4600 rpm7700 rpm0.56 kg560 g
FAG32011-X-XLTapered roller bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width, inner ring (B)
23 mm
0.905512 in
Width, outer ring (C)
17.5 mm
0.688976 in
Width, total (T)
23 mm
0.905512 in
101 kN118 kN4600 rpm9300 rpm0.559 kg559 g
FAG32011-X-XL>ATapered roller bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width, inner ring (B)
23 mm
0.905512 in
Width, outer ring (C)
17.5 mm
0.688976 in
Width, total (T)
23 mm
0.905512 in
101 kN118 kN4600 rpm9300 rpm0.559 kg559 g
FAG32011-X-XL-DF-A0-30Tapered roller bearing set
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Inner ring total width (2B)
46 mm
1.811024 in
Outer ring total width (2T)
46 mm
1.811024 in
172 kN237 kN4600 rpm9300 rpm1.17 kg1170 g
FAG32011-X-XL-DF-A90-120Tapered roller bearing set
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Inner ring total width (2B)
46 mm
1.811024 in
Outer ring total width (2T)
46 mm
1.811024 in
172 kN237 kN4600 rpm9300 rpm1.2 kg1200 g
FAG32011-X-XL-J30PCTapered roller bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width, inner ring (B)
23 mm
0.905512 in
Width, outer ring (C)
17.5 mm
0.688976 in
Width, total (T)
23 mm
0.905512 in
101 kN118 kN4600 rpm9300 rpm0.56 kg560 g
FAG32011-X-XL-P5Tapered roller bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width, inner ring (B)
23 mm
0.905512 in
Width, outer ring (C)
17.5 mm
0.688976 in
Width, total (T)
23 mm
0.905512 in
101 kN118 kN4600 rpm9300 rpm0.59 kg590 g
FAG32011-X-XL-W215FDTapered roller bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width, inner ring (B)
23 mm
0.905512 in
Width, outer ring (C)
17.5 mm
0.688976 in
Width, total (T)
23 mm
0.905512 in
107 kN118 kN4600 rpm9300 rpm0.56 kg560 g
FAG32011-X-XL-W60CTapered roller bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width, inner ring (B)
23 mm
0.905512 in
Width, outer ring (C)
17.5 mm
0.688976 in
Width, total (T)
23 mm
0.905512 in
105 kN118 kN4600 rpm9300 rpm0.56 kg560 g
TIMKEN32011XTapered roller bearing
Recorded bore (d)
55 mm
2.165354 in
Recorded outside dimension (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
23 mm
0.905512 in
112 kN126 kN——0.56 kg560 g
TIMKEN32011XM-99E60Tapered roller bearing
Recorded bore (d)
55 mm
2.165354 in
Recorded outside dimension (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
23 mm
0.905512 in
94.9 kN126 kN——0.56 kg560 g
TIMKEN32011XM-99KA1Tapered roller bearing
Recorded bore (d)
55 mm
2.165354 in
Recorded outside dimension (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
23 mm
0.905512 in
94.9 kN126 kN——0.56 kg560 g
TIMKEN32011XQTapered roller bearing
Recorded bore (d)
55 mm
2.165354 in
Recorded outside dimension (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
23 mm
0.905512 in
112 kN126 kN——0.56 kg560 g
TIMKEN32011XR / 32011XTapered roller bearing
Recorded bore (d)
55 mm
2.165354 in
Recorded outside dimension (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
23 mm
0.905512 in
94.9 kN126 kN——0.56 kg560 g
KOYO32011JRTapered roller bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
23 mm
0.905512 in
106 kN121 kN—4100 rpmLimiting Speeds(Grease Lub.): 4100 min-1Limiting Speeds(Oil Lub.): 5500 min-10.569 kg569 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
SKF 32011 XWithoutNot recordedNot recordedSheet metalNot recordedNone
SKF 32011 X/P5WithoutNot recordedNot recordedSheet metalNot recordedNone
SKF 32011 X/VA983WithoutNot recordedNot recordedSheet metalNot recordedNone
SKF 32011 X/VB206WithoutNot recordedNot recordedSheet metalNot recordedNone
FAG 32011-XNot recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32011-XDYNot recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32011-X-HNot recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32011-X-S1Not recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32011-X-XLNot recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32011-X-XL>ANot recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32011-X-XL-DF-A0-30Not recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32011-X-XL-DF-A90-120Not recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32011-X-XL-J30PCNot recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32011-X-XL-P5Not recordedP5 — Class 5 (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32011-X-XL-W215FDNot recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
FAG 32011-X-XL-W60CNot recordedP6X — Class 6X (ISO 492:2023)Not recordedStandard — Sheet steel cage, window cage, roller-guidedNot recordedNot recorded
TIMKEN 32011XOpenABMA Class KNot recordedSteel cageNot recordedNot recorded
TIMKEN 32011XM-99E60OpenABMA Class KNot recordedSteel cageNot recordedNot recorded
TIMKEN 32011XM-99KA1OpenABMA Class KNot recordedSteel cageNot recordedNot recorded
TIMKEN 32011XQOpenABMA Class NNot recordedSteel cageNot recordedNot recorded
TIMKEN 32011XR / 32011XOpenABMA Class KNot recordedSteel cageNot recordedNot recorded
KOYO 32011JRNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

32011JR

Tapered roller bearing

View full technical record →FAG

32011-X

Tapered roller bearing

View full technical record →TIMKEN

32011X

Tapered roller bearing

View full technical record →SKF

32011 X

Single row tapered roller bearing

View full technical record →FAG

32011-XDY

Tapered roller bearing

View full technical record →FAG

32011-X-H

Tapered roller bearing

View full technical record →TIMKEN

32011XM-99E60

Tapered roller bearing

View full technical record →TIMKEN

32011XM-99KA1

Tapered roller bearing

View full technical record →SKF

32011 X/P5

Single row tapered roller bearing

View full technical record →TIMKEN

32011XQ

Tapered roller bearing

View full technical record →TIMKEN

32011XR / 32011X

Tapered roller bearing

View full technical record →FAG

32011-X-S1

Tapered roller bearing

View full technical record →
Filter all 22 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search