32005 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 32005. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
32005 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 15 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 32005
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
KOYO 32005JR — 5 dimension fields
Tapered roller bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
For a tapered bearing, total assembly width T, inner-ring width B and outer-ring width C are different measurements. Keep the complete cup/cone or matched assembly designation; do not replace T with B when checking available axial space.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 25 mm |
| Outside diameter | D | 47 mm |
| Total width / height | T | 15 mm |
| Inner-ring width | B | 15 mm |
| Outer-ring width | C | 11.5 mm |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF32005 XSingle row tapered roller bearing |
| 33.2 kN | 32.5 kN | 12000 rpm | 14000 rpm | 0.112 kg112 g |
| SKF32005 X/QSingle row tapered roller bearing |
| 27 kN | 32.5 kN | 11000 rpm | 14000 rpm | 0.112 kg112 g |
| SKF32005 X/QVB015Single row tapered roller bearing |
| 27 kN | 32.5 kN | 11000 rpm | 14000 rpm | 0.11 kg110 g |
| SKF32005 X/QVU1705Single row tapered roller bearing |
| 27 kN | 32.5 kN | 11000 rpm | 14000 rpm | 0.112 kg112 g |
| SKF32005 X/VA983Special single row tapered roller bearing |
| 28.1 kN | 31.5 kN | 11000 rpm | 14000 rpm | 0.113 kg113 g |
| FAG32005-XTapered roller bearing |
| 26.5 kN | 33.5 kN | 9100 rpm | 15700 rpm | 0.11642 kg116.42 g |
| FAG32005-XDYTapered roller bearing |
| 26.5 kN | 31.5 kN | 9400 rpm | 15800 rpm | 0.12 kg120 g |
| FAG32005-X-HTapered roller bearing |
| 25.2 kN | 33.5 kN | 9100 rpm | 12560 rpm | 0.116 kg116 g |
| FAG32005-X-XLTapered roller bearing |
| 33 kN | 34 kN | 9000 rpm | 18900 rpm | 0.115 kg115 g |
| FAG32005-X-XL-P5Tapered roller bearing |
| 33 kN | 34 kN | 9000 rpm | 18900 rpm | 0.1155 kg115.5 g |
| TIMKEN32005XTapered roller bearing |
| 36.5 kN | 35.4 kN | — | — | 0.12 kg120 g |
| TIMKEN32005X-90KB8Tapered roller bearing |
| 36.5 kN | 35.4 kN | — | — | 0.11 kg110 g |
| TIMKEN32005X-99E60Tapered roller bearing |
| 36.5 kN | 35.4 kN | — | — | 0.12 kg120 g |
| TIMKEN32005XQTapered roller bearing |
| 36.5 kN | 35.4 kN | — | — | 0.12 kg120 g |
| KOYO32005JRTapered roller bearing |
| 37.8 kN | 37.7 kN | — | 8300 rpmLimiting Speeds(Grease Lub.): 8300 min-1Limiting Speeds(Oil Lub.): 11000 min-1 | 0.118 kg118 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 32005 X | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32005 X/Q | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32005 X/QVB015 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32005 X/QVU1705 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32005 X/VA983 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| FAG 32005-X | Not recorded | P6X — Class 6X (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32005-XDY | Not recorded | P6X — Class 6X (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32005-X-H | Not recorded | P6X — Class 6X (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32005-X-XL | Not recorded | P6X — Class 6X (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32005-X-XL-P5 | Not recorded | P5 — Class 5 (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| TIMKEN 32005X | Open | ABMA Class K | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 32005X-90KB8 | Open | ABMA Class K | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 32005X-99E60 | Open | ABMA Class K | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 32005XQ | Open | ABMA Class N | Not recorded | Steel cage | Not recorded | Not recorded |
| KOYO 32005JR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
32005JR
Tapered roller bearing
View full technical record →FAG32005-X
Tapered roller bearing
View full technical record →TIMKEN32005X
Tapered roller bearing
View full technical record →SKF32005 X
Single row tapered roller bearing
View full technical record →TIMKEN32005X-90KB8
Tapered roller bearing
View full technical record →TIMKEN32005X-99E60
Tapered roller bearing
View full technical record →FAG32005-XDY
Tapered roller bearing
View full technical record →FAG32005-X-H
Tapered roller bearing
View full technical record →TIMKEN32005XQ
Tapered roller bearing
View full technical record →SKF32005 X/Q
Single row tapered roller bearing
View full technical record →SKF32005 X/QVB015
Single row tapered roller bearing
View full technical record →SKF32005 X/QVU1705
Single row tapered roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.