30305 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 30305. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
30305 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 10 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 30305
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
TIMKEN 30305 — 14 dimension fields
Tapered roller bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
This assembly is identified by cone X30305M and cup Y30305M. T is the assembled width; B and C are the separate ring widths. A loose cone, a loose cup and the complete assembly are not the same item.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 25 mm / 0.9843 in |
| O.D. (D) | D | 62 mm / 2.4409 in |
| Width (T) | T | 18.25 mm / 0.7185 in |
| Inner Ring Width (B) | B | 17 mm / 0.6693 in |
| Outer Ring Width (C) | C | 15 mm / 0.5906 in |
| Effective Center Location | Not supplied separately | -5.1 mm / -0.2 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.520 mm / 0.060 in |
| Max Housing Fillet Radius | Not supplied separately | 1.52 mm / 0.06 in |
| Shaft Backing Shoulder Dia. - Frontface (da) | da | 32.5 mm / 1.28 in |
| Shaft Backing Shoulder Dia. - Backface (db) | db | 34.5 mm / 1.36 in |
| Housing Backing Shoulder Dia. - Frontface (Da) | Da | 57.66 mm / 2.27 in |
| Housing Backing Shoulder Dia. - Backface (Db) | Db | 55.12 mm / 2.17 in |
| Cage Location rel. to BF (Aa) | Aa | -0.5 mm / -0.02 in |
| Cage Location rel. to FF (Ab) | Ab | 3.3 mm / 0.13 in |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF30305Single row tapered roller bearing |
| 55.3 kN | 43 kN | 9500 rpm | 12000 rpm | 0.252 kg252 g |
| TIMKEN30305Tapered roller bearing |
| 53.8 kN | 49.6 kN | — | — | 0.27 kg270 g |
| SKF30305 CSingle row tapered roller bearing |
| 39.1 kN | 39 kN | 8500 rpm | 13000 rpm | 0.266 kg266 g |
| SKF30305/VA983Special single row tapered roller bearing |
| 48.6 kN | 44 kN | 8500 rpm | 12000 rpm | 0.264 kg264 g |
| SKF30305/VB281Single row tapered roller bearing |
| 55.3 kN | 43 kN | 9500 rpm | 12000 rpm | 0.252 kg252 g |
| FAG30305-ATapered roller bearing |
| 47 kN | 45.5 kN | 8000 rpm | 12800 rpm | 0.267 kg267 g |
| FAG30305-DYTapered roller bearing |
| 45.5 kN | 43.5 kN | 8100 rpm | 12900 rpm | 0.271 kg271 g |
| FAG30305-HTapered roller bearing |
| 44.7 kN | 45.5 kN | 8200 rpm | 10240 rpm | 0.264 kg264 g |
| KOYO30305DJRTapered roller bearing |
| 49.7 kN | 42.5 kN | — | 5700 rpmLimiting Speeds(Grease Lub.): 5700 min-1Limiting Speeds(Oil Lub.): 8000 min-1 | 0.269 kg269 g |
| KOYO30305JRTapered roller bearing |
| 60.3 kN | 46.9 kN | — | 6800 rpmLimiting Speeds(Grease Lub.): 6800 min-1Limiting Speeds(Oil Lub.): 9000 min-1 | 0.273 kg273 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 30305 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| TIMKEN 30305 | Open | ABMA Class K | Not recorded | Steel cage | Not recorded | Not recorded |
| SKF 30305 C | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 30305/VA983 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 30305/VB281 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| FAG 30305-A | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 30305-DY | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 30305-H | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| KOYO 30305DJR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 30305JR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
30305
Tapered roller bearing
View full technical record →SKF30305
Single row tapered roller bearing
View full technical record →FAG30305-A
Tapered roller bearing
View full technical record →SKF30305 C
Single row tapered roller bearing
View full technical record →KOYO30305DJR
Tapered roller bearing
View full technical record →FAG30305-DY
Tapered roller bearing
View full technical record →FAG30305-H
Tapered roller bearing
View full technical record →KOYO30305JR
Tapered roller bearing
View full technical record →SKF30305/VA983
Special single row tapered roller bearing
View full technical record →SKF30305/VB281
Single row tapered roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.