Find · understand · compare
24160 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 24160. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
24160 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 43 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF24160-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 3881 kN | 6300 kN | — | 400 rpm | 155 kg155000 g |
| SKF24160 CC/C2W33Spherical roller bearing with relubrication features |
| 3876 kN | 6300 kN | 560 rpm | 800 rpm | 157 kg157000 g |
| SKF24160 CC/C3W33Spherical roller bearing with relubrication features |
| 3876 kN | 6300 kN | 560 rpm | 800 rpm | 157 kg157000 g |
| SKF24160 CC/C3W513Spherical roller bearing with relubrication features |
| 3876 kN | 6300 kN | 560 rpm | 800 rpm | 157 kg157000 g |
| SKF24160 CCK30/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 3876 kN | 6300 kN | 560 rpm | 800 rpm | 155 kg155000 g |
| SKF24160 CCK30/W33Spherical roller bearing with tapered bore and relubrication features |
| 3876 kN | 6300 kN | 560 rpm | 800 rpm | 155 kg155000 g |
| SKF24160 CCK30/W77Spherical roller bearing with tapered bore and relubrication features |
| 3876 kN | 6300 kN | 560 rpm | 800 rpm | 155 kg155000 g |
| SKF24160 CC/W33Spherical roller bearing with relubrication features |
| 3876 kN | 6300 kN | 560 rpm | 800 rpm | 157 kg157000 g |
| FAG24160-BE-XLSpherical Roller Bearing |
| 3950 kN | 6400 kN | 450 rpm | 1100 rpm | 155.72 kg155720 g |
| FAG24160-BE-XL-C2Spherical Roller Bearing |
| 3950 kN | 6400 kN | 450 rpm | 1100 rpm | 155.72 kg155720 g |
| FAG24160-BE-XL-C3Spherical Roller Bearing |
| 3950 kN | 6400 kN | 450 rpm | 1100 rpm | 155.65 kg155650 g |
| FAG24160-BE-XL-C4Spherical Roller Bearing |
| 3950 kN | 6400 kN | 450 rpm | 1100 rpm | 155.56 kg155560 g |
| FAG24160-BE-XL-C5Spherical Roller Bearing |
| 3950 kN | 6400 kN | 450 rpm | 1100 rpm | 155.45 kg155450 g |
| FAG24160-BE-XL-H40Spherical Roller Bearing |
| 3950 kN | 6400 kN | 450 rpm | 1100 rpm | 157.4 kg157400 g |
| FAG24160-BE-XL-K30Spherical Roller Bearing |
| 3950 kN | 6400 kN | 450 rpm | 1100 rpm | 153.26 kg153260 g |
| FAG24160-BE-XL-K30-C3Spherical Roller Bearing |
| 3950 kN | 6400 kN | 450 rpm | 1100 rpm | 153.2 kg153200 g |
| FAG24160-BE-XL-K30-C4Spherical Roller Bearing |
| 3950 kN | 6400 kN | 450 rpm | 1100 rpm | 153.15 kg153150 g |
| FAG24160-BE-XL-K30-H40Spherical Roller Bearing |
| 3950 kN | 6400 kN | 450 rpm | 1100 rpm | 154.9 kg154900 g |
| TIMKEN24160EJW33W45ASpherical roller bearing |
| 4060 kN | 6270 kN | — | — | 152.68 kg152680 g |
| TIMKEN24160EJW33W45AC2Spherical roller bearing |
| 4060 kN | 6270 kN | — | — | 152.68 kg152680 g |
| TIMKEN24160EJW33W45AC3Spherical roller bearing |
| 4060 kN | 6270 kN | — | — | 152.68 kg152680 g |
| TIMKEN24160EJW33W45AC4Spherical roller bearing |
| 4060 kN | 6270 kN | — | — | 152.68 kg152680 g |
| TIMKEN24160EMBW33W45ASpherical roller bearing |
| 4060 kN | 6270 kN | — | — | 157.04 kg157040 g |
| TIMKEN24160EMBW33W45AC2Spherical roller bearing |
| 4060 kN | 6270 kN | — | — | 157.04 kg157040 g |
| TIMKEN24160EMBW33W45AC3Spherical roller bearing |
| 4060 kN | 6270 kN | — | — | 157.04 kg157040 g |
| TIMKEN24160EMBW33W45AC4Spherical roller bearing |
| 4060 kN | 6270 kN | — | — | 157.04 kg157040 g |
| TIMKEN24160EMBW40EW534C2Spherical roller bearing |
| 4060 kN | 6270 kN | — | — | 157.04 kg157040 g |
| TIMKEN24160EMBW507C08Spherical roller bearing |
| 4060 kN | 6270 kN | — | — | 157.04 kg157040 g |
| TIMKEN24160EMBW507C08C2Spherical roller bearing |
| 4060 kN | 6270 kN | — | — | 157.04 kg157040 g |
| TIMKEN24160EMBW507C08C3Spherical roller bearing |
| 4060 kN | 6270 kN | — | — | 157.04 kg157040 g |
| TIMKEN24160EMBW507C08C4Spherical roller bearing |
| 4060 kN | 6270 kN | — | — | 157.04 kg157040 g |
| TIMKEN24160KEJW33W45ASpherical roller bearing |
| 4060 kN | 6270 kN | — | — | 150.16 kg150160 g |
| TIMKEN24160KEJW33W45AC2Spherical roller bearing |
| 4060 kN | 6270 kN | — | — | 150.16 kg150160 g |
| TIMKEN24160KEJW33W45AC3Spherical roller bearing |
| 4060 kN | 6270 kN | — | — | 150.16 kg150160 g |
| TIMKEN24160KEJW33W45AC4Spherical roller bearing |
| 4060 kN | 6270 kN | — | — | 150.16 kg150160 g |
| TIMKEN24160KEMBW33W45ASpherical roller bearing |
| 4060 kN | 6270 kN | — | — | 154.5 kg154500 g |
| TIMKEN24160KEMBW33W45AC3Spherical roller bearing |
| 4060 kN | 6270 kN | — | — | 154.5 kg154500 g |
| NSK24160CAME4Spherical roller bearing |
| 3900 kN | 5800 kN | — | — | 152 kg152000 g |
| NSK24160CAMK30E4Spherical roller bearing |
| 3900 kN | 5800 kN | — | — | — |
| KOYO24160RHASpherical roller bearing |
| 4030 kN | 6420 kN | — | 590 rpmLimiting Speeds(Grease Lub.): 590 min-1Limiting Speeds(Oil Lub.): 790 min-1 | 150 kg150000 g |
| KOYO24160RHAK30+AH24160Spherical roller bearing |
| 4030 kN | 6420 kN | — | 590 rpmLimiting Speeds(Grease Lub.): 590 min-1Limiting Speeds(Oil Lub.): 790 min-1 | 168 kg168000 g |
| KOYO24160RRSpherical roller bearing |
| 4160 kN | 6280 kN | — | 590 rpmLimiting Speeds(Grease Lub.): 590 min-1Limiting Speeds(Oil Lub.): 790 min-1 | 162 kg162000 g |
| KOYO24160RRK30+AH24160Spherical roller bearing |
| 4160 kN | 6280 kN | — | 590 rpmLimiting Speeds(Grease Lub.): 590 min-1Limiting Speeds(Oil Lub.): 790 min-1 | 180 kg180000 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 24160-2CS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 24160 CC/C2W33 | Without | Not recorded | C2 | Sheet metal | Not recorded | None |
| SKF 24160 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24160 CC/C3W513 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24160 CCK30/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24160 CCK30/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 24160 CCK30/W77 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 24160 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 24160-BE-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24160-BE-XL-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24160-BE-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24160-BE-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24160-BE-XL-C5 | Not recorded | Not recorded | C5 (Group 5) — Internal clearance larger than C4 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24160-BE-XL-H40 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24160-BE-XL-K30 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24160-BE-XL-K30-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24160-BE-XL-K30-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24160-BE-XL-K30-H40 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 24160EJW33W45A | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24160EJW33W45AC2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24160EJW33W45AC3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24160EJW33W45AC4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24160EMBW33W45A | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24160EMBW33W45AC2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24160EMBW33W45AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24160EMBW33W45AC4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24160EMBW40EW534C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24160EMBW507C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24160EMBW507C08C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24160EMBW507C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24160EMBW507C08C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24160KEJW33W45A | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24160KEJW33W45AC2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24160KEJW33W45AC3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24160KEJW33W45AC4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24160KEMBW33W45A | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24160KEMBW33W45AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 24160CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 24160CAMK30E4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| KOYO 24160RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24160RHAK30+AH24160 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24160RR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24160RRK30+AH24160 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
241/600-2CS5K30/C3HGEA8
Spherical roller bearing with tapered bore, integral sealing and relubrication features
View full technical record →NSK241/600CAME4
Spherical roller bearing
View full technical record →NSK241/600CAMK30E4
Spherical roller bearing
View full technical record →SKF241/600 ECAK30/C083W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF241/600 ECAK30/C3W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF241/600 ECAK30/C4W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF241/600 ECAK30/W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF241/600 ECA/W33
Spherical roller bearing with relubrication features
View full technical record →TIMKEN241/600KYMBW33W45AC3
Spherical roller bearing
View full technical record →TIMKEN241/600KYMBW40RW45A
Spherical roller bearing
View full technical record →TIMKEN241/600KYMBW45A
Spherical roller bearing
View full technical record →TIMKEN241/600KYMDW906AC3
Spherical roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.