Find · understand · compare
24156 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 24156. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
24156 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 42 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF24156 CC/C3W33Spherical roller bearing with relubrication features |
| 3183 kN | 5100 kN | 630 rpm | 900 rpm | 117 kg117000 g |
| SKF24156 CCK30/C083W33Spherical roller bearing with tapered bore and relubrication features |
| 3183 kN | 5100 kN | 630 rpm | 900 rpm | 115 kg115000 g |
| SKF24156 CCK30/C084W33Spherical roller bearing with tapered bore and relubrication features |
| 3183 kN | 5100 kN | 630 rpm | 900 rpm | 115 kg115000 g |
| SKF24156 CCK30/C2W33Spherical roller bearing with tapered bore and relubrication features |
| 3183 kN | 5100 kN | 630 rpm | 900 rpm | 115 kg115000 g |
| SKF24156 CCK30/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 3183 kN | 5100 kN | 630 rpm | 900 rpm | 115 kg115000 g |
| SKF24156 CCK30/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 3183 kN | 5100 kN | 630 rpm | 900 rpm | 115 kg115000 g |
| SKF24156 CCK30/W33Spherical roller bearing with tapered bore and relubrication features |
| 3183 kN | 5100 kN | 630 rpm | 900 rpm | 115 kg115000 g |
| SKF24156 CC/W33Spherical roller bearing with relubrication features |
| 3183 kN | 5100 kN | 630 rpm | 900 rpm | 117 kg117000 g |
| FAG24156-BE-XLSpherical Roller Bearing |
| 3300 kN | 5200 kN | 520 rpm | 1230 rpm | 115.68 kg115680 g |
| FAG24156-BE-XL-C2Spherical Roller Bearing |
| 3300 kN | 5200 kN | 520 rpm | 1230 rpm | 115.7 kg115700 g |
| FAG24156-BE-XL-C3Spherical Roller Bearing |
| 3300 kN | 5200 kN | 520 rpm | 1230 rpm | 115.615 kg115615 g |
| FAG24156-BE-XL-H40Spherical Roller Bearing |
| 3300 kN | 5200 kN | 520 rpm | 1230 rpm | 117.5 kg117500 g |
| FAG24156-BE-XL-K30Spherical Roller Bearing |
| 3300 kN | 5200 kN | 520 rpm | 1230 rpm | 114.015 kg114015 g |
| FAG24156-BE-XL-K30-C3Spherical Roller Bearing |
| 3300 kN | 5200 kN | 520 rpm | 1230 rpm | 113.845 kg113845 g |
| FAG24156-BE-XL-K30-C4Spherical Roller Bearing |
| 3300 kN | 5200 kN | 520 rpm | 1230 rpm | 113.92 kg113920 g |
| TIMKEN24156EJW33W45ASpherical roller bearing |
| 3320 kN | 5290 kN | — | — | 115.77 kg115770 g |
| TIMKEN24156EJW33W45AC2Spherical roller bearing |
| 3320 kN | 5290 kN | — | — | 115.77 kg115770 g |
| TIMKEN24156EJW33W45AC3Spherical roller bearing |
| 3320 kN | 5290 kN | — | — | 115.77 kg115770 g |
| TIMKEN24156EJW33W45AC4Spherical roller bearing |
| 3320 kN | 5290 kN | — | — | 115.77 kg115770 g |
| TIMKEN24156EMBW33W40IW45AC3Spherical roller bearing |
| 3210 kN | 5060 kN | — | — | 117.73 kg117730 g |
| TIMKEN24156EMBW33W45ASpherical roller bearing |
| 3210 kN | 5060 kN | — | — | 117.72 kg117720 g |
| TIMKEN24156EMBW33W45AC3Spherical roller bearing |
| 3210 kN | 5060 kN | — | — | 117.72 kg117720 g |
| TIMKEN24156EMBW33W45AC4Spherical roller bearing |
| 3210 kN | 5060 kN | — | — | 117.72 kg117720 g |
| TIMKEN24156EMBW33W45AC6Spherical roller bearing |
| 3210 kN | 5060 kN | — | — | 117.72 kg117720 g |
| TIMKEN24156KEJW33W45ASpherical roller bearing |
| 3320 kN | 5290 kN | — | — | 113.86 kg113860 g |
| TIMKEN24156KEJW33W45AC2Spherical roller bearing |
| 3320 kN | 5290 kN | — | — | 113.86 kg113860 g |
| TIMKEN24156KEJW33W45AC3Spherical roller bearing |
| 3320 kN | 5290 kN | — | — | 113.86 kg113860 g |
| TIMKEN24156KEJW33W45AC4Spherical roller bearing |
| 3320 kN | 5290 kN | — | — | 113.86 kg113860 g |
| TIMKEN24156KEMBW33W45ASpherical roller bearing |
| 3210 kN | 5060 kN | — | — | 115.8 kg115800 g |
| TIMKEN24156KEMBW33W45AC3Spherical roller bearing |
| 3210 kN | 5060 kN | — | — | 115.8 kg115800 g |
| TIMKEN24156KEMBW40IW534C4Spherical roller bearing |
| 3210 kN | 5060 kN | — | — | 115.8 kg115800 g |
| TIMKEN24156KEMBW507C08C2Spherical roller bearing |
| 3210 kN | 5060 kN | — | — | 115.8 kg115800 g |
| TIMKEN24156KEMBW507C08C3Spherical roller bearing |
| 3210 kN | 5060 kN | — | — | 115.8 kg115800 g |
| TIMKEN24156KEMBW507C08C4Spherical roller bearing |
| 3210 kN | 5060 kN | — | — | 115.8 kg115800 g |
| TIMKEN24156KEMBW507W84Spherical roller bearing |
| 3210 kN | 5060 kN | — | — | 115.87 kg115870 g |
| TIMKEN24156KEMBW906AC3Spherical roller bearing |
| 3210 kN | 5060 kN | — | — | 115.82 kg115820 g |
| NSK24156CAME4Spherical roller bearing |
| 3300 kN | 5000 kN | — | — | 115 kg115000 g |
| NSK24156CAMK30E4Spherical roller bearing |
| 3300 kN | 5000 kN | — | — | — |
| KOYO24156RHASpherical roller bearing |
| 3320 kN | 5240 kN | — | 660 rpmLimiting Speeds(Grease Lub.): 660 min-1Limiting Speeds(Oil Lub.): 880 min-1 | 113 kg113000 g |
| KOYO24156RHAK30+AH24156Spherical roller bearing |
| 3320 kN | 5240 kN | — | 660 rpmLimiting Speeds(Grease Lub.): 660 min-1Limiting Speeds(Oil Lub.): 880 min-1 | 128 kg128000 g |
| KOYO24156RRSpherical roller bearing |
| 3390 kN | 5140 kN | — | 660 rpmLimiting Speeds(Grease Lub.): 660 min-1Limiting Speeds(Oil Lub.): 880 min-1 | 122 kg122000 g |
| KOYO24156RRK30+AH24156Spherical roller bearing |
| 3390 kN | 5140 kN | — | 660 rpmLimiting Speeds(Grease Lub.): 660 min-1Limiting Speeds(Oil Lub.): 880 min-1 | 136 kg136000 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 24156 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24156 CCK30/C083W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24156 CCK30/C084W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 24156 CCK30/C2W33 | Without | Not recorded | C2 | Sheet metal | Not recorded | None |
| SKF 24156 CCK30/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24156 CCK30/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 24156 CCK30/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 24156 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 24156-BE-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24156-BE-XL-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24156-BE-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24156-BE-XL-H40 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24156-BE-XL-K30 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24156-BE-XL-K30-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24156-BE-XL-K30-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 24156EJW33W45A | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24156EJW33W45AC2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24156EJW33W45AC3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24156EJW33W45AC4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24156EMBW33W40IW45AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24156EMBW33W45A | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24156EMBW33W45AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24156EMBW33W45AC4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24156EMBW33W45AC6 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24156KEJW33W45A | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24156KEJW33W45AC2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24156KEJW33W45AC3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24156KEJW33W45AC4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24156KEMBW33W45A | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24156KEMBW33W45AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24156KEMBW40IW534C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24156KEMBW507C08C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24156KEMBW507C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24156KEMBW507C08C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24156KEMBW507W84 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24156KEMBW906AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 24156CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 24156CAMK30E4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| KOYO 24156RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24156RHAK30+AH24156 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24156RR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24156RRK30+AH24156 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
241/560-2CS5K30/C3HGEA8
Spherical roller bearing with tapered bore, integral sealing and relubrication features
View full technical record →FAG241/560-BEA-XL-K30-MB1
Spherical Roller Bearing
View full technical record →FAG241/560-BEA-XL-K30-MB1-C3
Spherical Roller Bearing
View full technical record →FAG241/560-BEA-XL-MB1
Spherical Roller Bearing
View full technical record →FAG241/560-BEA-XL-MB1-C3
Spherical Roller Bearing
View full technical record →FAG241/560-BEA-XL-MB1-H40
Spherical Roller Bearing
View full technical record →NSK241/560CAME4
Spherical roller bearing
View full technical record →NSK241/560CAMK30E4
Spherical roller bearing
View full technical record →SKF241/560 ECAK30/C083W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF241/560 ECAK30/C3W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF241/560 ECAK30/W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF241/560 ECAK30/W77
Spherical roller bearing with tapered bore and relubrication features
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.