Find · understand · compare
24136 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 24136. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
24136 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 31 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF24136-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 1452 kN | 2160 kN | — | 670 rpm | 34.5 kg34500 g |
| SKF24136 CC/C3W33Spherical roller bearing with relubrication features |
| 1449 kN | 2160 kN | 1100 rpm | 1600 rpm | 33 kg33000 g |
| SKF24136 CC/C3W513Spherical roller bearing with relubrication features |
| 1449 kN | 2160 kN | 1100 rpm | 1600 rpm | 33 kg33000 g |
| SKF24136 CC/C4W33Spherical roller bearing with relubrication features |
| 1449 kN | 2160 kN | 1100 rpm | 1600 rpm | 33 kg33000 g |
| SKF24136 CCK30/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 1449 kN | 2160 kN | 1100 rpm | 1600 rpm | 32.5 kg32500 g |
| SKF24136 CCK30/W33Spherical roller bearing with tapered bore and relubrication features |
| 1449 kN | 2160 kN | 1100 rpm | 1600 rpm | 32.5 kg32500 g |
| SKF24136 CC/W33Spherical roller bearing with relubrication features |
| 1449 kN | 2160 kN | 1100 rpm | 1600 rpm | 33 kg33000 g |
| SKF24136 CC/W513Spherical roller bearing with relubrication features |
| 1449 kN | 2160 kN | 1100 rpm | 1600 rpm | 33 kg33000 g |
| FAG24136-BE-XLSpherical Roller Bearing |
| 1460 kN | 2170 kN | 980 rpm | 2000 rpm | 33.2 kg33200 g |
| FAG24136-BE-XL-C2Spherical Roller Bearing |
| 1460 kN | 2170 kN | 980 rpm | 2000 rpm | 33.2 kg33200 g |
| FAG24136-BE-XL-C3Spherical Roller Bearing |
| 1460 kN | 2170 kN | 980 rpm | 2000 rpm | 33.2 kg33200 g |
| FAG24136-BE-XL-C4Spherical Roller Bearing |
| 1460 kN | 2170 kN | 980 rpm | 2000 rpm | 32.708 kg32708 g |
| FAG24136-BE-XL-C5Spherical Roller Bearing |
| 1460 kN | 2170 kN | 980 rpm | 2000 rpm | 33.2 kg33200 g |
| FAG24136-BE-XL-H40ABSpherical Roller Bearing |
| 1460 kN | 2170 kN | 980 rpm | 2000 rpm | 32.742 kg32742 g |
| FAG24136-BE-XL-K30Spherical Roller Bearing |
| 1460 kN | 2170 kN | 980 rpm | 2000 rpm | 32.236 kg32236 g |
| FAG24136-BE-XL-K30-C3Spherical Roller Bearing |
| 1460 kN | 2170 kN | 980 rpm | 2000 rpm | 32.7 kg32700 g |
| FAG24136-BE-XL-K30-C4Spherical Roller Bearing |
| 1460 kN | 2170 kN | 980 rpm | 2000 rpm | 32.236 kg32236 g |
| TIMKEN24136EJW33Spherical roller bearing |
| 1650 kN | 2450 kN | — | — | 33.2 kg33200 g |
| TIMKEN24136EJW33C2Spherical roller bearing |
| 1650 kN | 2450 kN | — | — | 33.2 kg33200 g |
| TIMKEN24136EJW33C3Spherical roller bearing |
| 1650 kN | 2450 kN | — | — | 33.2 kg33200 g |
| TIMKEN24136EJW33C4Spherical roller bearing |
| 1650 kN | 2450 kN | — | — | 33.2 kg33200 g |
| TIMKEN24136KEJW33Spherical roller bearing |
| 1650 kN | 2450 kN | — | — | 32.69 kg32690 g |
| TIMKEN24136KEJW33C3Spherical roller bearing |
| 1650 kN | 2450 kN | — | — | 32.69 kg32690 g |
| NSK24136CAME4Spherical roller bearing |
| 1490 kN | 2040 kN | — | — | 33.1 kg33100 g |
| NSK24136CAMK30E4Spherical roller bearing |
| 1490 kN | 2040 kN | — | — | — |
| NSK24136CE4Spherical roller bearing |
| 1490 kN | 2040 kN | — | — | 33.1 kg33100 g |
| NSK24136CK30E4Spherical roller bearing |
| 1490 kN | 2040 kN | — | — | — |
| KOYO24136RHASpherical roller bearing |
| 1510 kN | 2240 kN | — | 1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1500 min-1 | 31.8 kg31800 g |
| KOYO24136RHAK30+AH24136Spherical roller bearing |
| 1510 kN | 2240 kN | — | 1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1500 min-1 | 34.9 kg34900 g |
| KOYO24136RRSpherical roller bearing |
| 1530 kN | 2120 kN | — | 1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1500 min-1 | 34.4 kg34400 g |
| KOYO24136RRK30+AH24136Spherical roller bearing |
| 1530 kN | 2120 kN | — | 1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1500 min-1 | 37.6 kg37600 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 24136-2CS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 24136 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24136 CC/C3W513 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24136 CC/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 24136 CCK30/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24136 CCK30/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 24136 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 24136 CC/W513 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| FAG 24136-BE-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24136-BE-XL-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24136-BE-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24136-BE-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24136-BE-XL-C5 | Not recorded | Not recorded | C5 (Group 5) — Internal clearance larger than C4 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24136-BE-XL-H40AB | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24136-BE-XL-K30 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24136-BE-XL-K30-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24136-BE-XL-K30-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 24136EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24136EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24136EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24136EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24136KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24136KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 24136CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 24136CAMK30E4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 24136CE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 24136CK30E4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 24136RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24136RHAK30+AH24136 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24136RR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24136RRK30+AH24136 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
24136-2CS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →FAG24136-BE-XL
Spherical Roller Bearing
View full technical record →FAG24136-BE-XL-C2
Spherical Roller Bearing
View full technical record →FAG24136-BE-XL-C3
Spherical Roller Bearing
View full technical record →FAG24136-BE-XL-C4
Spherical Roller Bearing
View full technical record →FAG24136-BE-XL-C5
Spherical Roller Bearing
View full technical record →FAG24136-BE-XL-H40AB
Spherical Roller Bearing
View full technical record →FAG24136-BE-XL-K30
Spherical Roller Bearing
View full technical record →FAG24136-BE-XL-K30-C3
Spherical Roller Bearing
View full technical record →FAG24136-BE-XL-K30-C4
Spherical Roller Bearing
View full technical record →NSK24136CAME4
Spherical roller bearing
View full technical record →NSK24136CAMK30E4
Spherical roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.