Find · understand · compare
24122 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 24122. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
24122 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 40 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF24122-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 540 kN | 750 kN | — | 1100 rpm | 6.85 kg6850 g |
| SKF24122-2CS5/VT143CSpherical roller bearing with integral sealing and relubrication features |
| 540 kN | 750 kN | — | 205 rpm | 7.1 kg7100 g |
| SKF24122-2CS5W/C4GEM9Spherical roller bearing with integral sealing |
| 540 kN | 750 kN | — | 205 rpm | 6.85 kg6850 g |
| SKF24122/C3W33VA9B1Spherical roller bearing for continuous casters, with relubrication features |
| — | 750 kN | — | 20 rpm | 7.1 kg7100 g |
| SKF24122/C4W33VA9B1Spherical roller bearing for continuous casters, with relubrication features |
| — | 750 kN | — | 20 rpm | 7.1 kg7100 g |
| SKF24122 CC/C3W33Spherical roller bearing with relubrication features |
| 539 kN | 750 kN | 2000 rpm | 3000 rpm | 6.85 kg6850 g |
| SKF24122 CC/C4W33Spherical roller bearing with relubrication features |
| 539 kN | 750 kN | 2000 rpm | 3000 rpm | 6.85 kg6850 g |
| SKF24122 CCK30/C2W33VG004Spherical roller bearing with tapered bore and relubrication features |
| 539 kN | 750 kN | 2000 rpm | 3000 rpm | 6.75 kg6750 g |
| SKF24122 CCK30/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 539 kN | 750 kN | 2000 rpm | 3000 rpm | 6.72 kg6720 g |
| SKF24122 CCK30/W33Spherical roller bearing with tapered bore and relubrication features |
| 539 kN | 750 kN | 2000 rpm | 3000 rpm | 6.72 kg6720 g |
| SKF24122 CC/W33Spherical roller bearing with relubrication features |
| 539 kN | 750 kN | 2000 rpm | 3000 rpm | 6.85 kg6850 g |
| FAG24122-BE-XLSpherical Roller Bearing |
| 530 kN | 750 kN | 1960 rpm | 3350 rpm | 6.709 kg6709 g |
| FAG24122-BE-XL-2VSRSpherical Roller Bearing |
| 530 kN | 750 kN | — | 830 rpm | 6.7 kg6700 g |
| FAG24122-BE-XL-2VSR-C4Spherical Roller Bearing |
| 530 kN | 750 kN | — | 830 rpm | 6.755 kg6755 g |
| FAG24122-BE-XL-2VSR-H40Spherical Roller Bearing |
| 530 kN | 750 kN | — | 830 rpm | 6.7 kg6700 g |
| FAG24122-BE-XL-2VSR-H40-C4Spherical Roller Bearing |
| 530 kN | 750 kN | — | 830 rpm | 6.7 kg6700 g |
| FAG24122-BE-XL-C3Spherical Roller Bearing |
| 530 kN | 750 kN | 1960 rpm | 3350 rpm | 6.707 kg6707 g |
| FAG24122-BE-XL-C4Spherical Roller Bearing |
| 530 kN | 750 kN | 1960 rpm | 3350 rpm | 6.703 kg6703 g |
| FAG24122-BE-XL-H40Spherical Roller Bearing |
| 530 kN | 750 kN | 1960 rpm | 3350 rpm | 6.747 kg6747 g |
| FAG24122-BE-XL-K30Spherical Roller Bearing |
| 530 kN | 750 kN | 1960 rpm | 3350 rpm | 6.613 kg6613 g |
| FAG24122-BE-XL-K30-C3Spherical Roller Bearing |
| 530 kN | 750 kN | 1960 rpm | 3350 rpm | 6.613 kg6613 g |
| FAG24122-CP-C3Spherical Roller Bearing |
| — | 750 kN | — | — | 6.705 kg6705 g |
| FAG24122-CP-C4Spherical Roller Bearing |
| — | 750 kN | — | — | 6.69 kg6690 g |
| TIMKEN24122EJW33Spherical roller bearing |
| 591 kN | 811 kN | — | — | 6.7 kg6700 g |
| TIMKEN24122EJW33C2Spherical roller bearing |
| 591 kN | 811 kN | — | — | 6.7 kg6700 g |
| TIMKEN24122EJW33C3Spherical roller bearing |
| 591 kN | 811 kN | — | — | 6.7 kg6700 g |
| TIMKEN24122EJW33C4Spherical roller bearing |
| 591 kN | 811 kN | — | — | 6.7 kg6700 g |
| TIMKEN24122EJW841Spherical roller bearing |
| 591 kN | 811 kN | — | — | 6.8 kg6800 g |
| TIMKEN24122EJW841C3Spherical roller bearing |
| 591 kN | 811 kN | — | — | 6.8 kg6800 g |
| TIMKEN24122EMW33Spherical roller bearing |
| 575 kN | 773 kN | — | — | 6.67 kg6670 g |
| TIMKEN24122EMW33C4Spherical roller bearing |
| 575 kN | 773 kN | — | — | 6.67 kg6670 g |
| TIMKEN24122KEJW33Spherical roller bearing |
| 591 kN | 811 kN | — | — | 6.59 kg6590 g |
| TIMKEN24122KEJW33C3Spherical roller bearing |
| 591 kN | 811 kN | — | — | 6.59 kg6590 g |
| TIMKEN24122KEJW841SLASpherical roller bearing |
| 591 kN | 811 kN | — | — | 6.83 kg6830 g |
| NSK24122CAME4Spherical roller bearing |
| 575 kN | 750 kN | — | — | 6.84 kg6840 g |
| NSK24122CAMK30E4Spherical roller bearing |
| 575 kN | 750 kN | — | — | — |
| NSK24122CE4Spherical roller bearing |
| 575 kN | 750 kN | — | — | 6.84 kg6840 g |
| NSK24122CK30E4Spherical roller bearing |
| 575 kN | 750 kN | — | — | — |
| KOYO24122RHSpherical roller bearing |
| 569 kN | 778 kN | — | 2500 rpmLimiting Speeds(Grease Lub.): 2500 min-1Limiting Speeds(Oil Lub.): 3300 min-1 | 6.98 kg6980 g |
| KOYO24122RZK30+AH24122Spherical roller bearing |
| 569 kN | 778 kN | — | 2500 rpmLimiting Speeds(Grease Lub.): 2500 min-1Limiting Speeds(Oil Lub.): 3300 min-1 | 7.6 kg7600 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 24122-2CS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 24122-2CS5/VT143C | Seal on both sides | Not recorded | CN | Sheet metal | Not recorded | Grease |
| SKF 24122-2CS5W/C4GEM9 | Seal on both sides | Not recorded | C4 | Sheet metal | Not recorded | Grease |
| SKF 24122/C3W33VA9B1 | Without | Normal | C3 | Sheet metal | Not recorded | None |
| SKF 24122/C4W33VA9B1 | Without | Normal | C4 | Sheet metal | Not recorded | None |
| SKF 24122 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24122 CC/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 24122 CCK30/C2W33VG004 | Without | Not recorded | C2 | Sheet metal | Not recorded | None |
| SKF 24122 CCK30/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24122 CCK30/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 24122 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 24122-BE-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24122-BE-XL-2VSR | 2VSR — Seals on both sides, high temperature | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24122-BE-XL-2VSR-C4 | 2VSR — Seals on both sides, high temperature | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24122-BE-XL-2VSR-H40 | 2VSR — Seals on both sides, high temperature | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24122-BE-XL-2VSR-H40-C4 | 2VSR — Seals on both sides, high temperature | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24122-BE-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24122-BE-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24122-BE-XL-H40 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24122-BE-XL-K30 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24122-BE-XL-K30-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24122-CP-C3 | Without | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24122-CP-C4 | Without | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 24122EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24122EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24122EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24122EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24122EJW841 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24122EJW841C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24122EMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24122EMW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24122KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24122KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24122KEJW841SLA | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 24122CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 24122CAMK30E4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 24122CE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 24122CK30E4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 24122RH | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24122RZK30+AH24122 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
24122-2CS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →SKF24122-2CS5/VT143C
Spherical roller bearing with integral sealing and relubrication features
View full technical record →SKF24122-2CS5W/C4GEM9
Spherical roller bearing with integral sealing
View full technical record →FAG24122-BE-XL
Spherical Roller Bearing
View full technical record →FAG24122-BE-XL-2VSR
Spherical Roller Bearing
View full technical record →FAG24122-BE-XL-2VSR-C4
Spherical Roller Bearing
View full technical record →FAG24122-BE-XL-2VSR-H40
Spherical Roller Bearing
View full technical record →FAG24122-BE-XL-2VSR-H40-C4
Spherical Roller Bearing
View full technical record →FAG24122-BE-XL-C3
Spherical Roller Bearing
View full technical record →FAG24122-BE-XL-C4
Spherical Roller Bearing
View full technical record →FAG24122-BE-XL-H40
Spherical Roller Bearing
View full technical record →FAG24122-BE-XL-K30
Spherical Roller Bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.