Find · understand · compare
24064 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 24064. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
24064 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 32 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF24064 CC/C08W33Spherical roller bearing with relubrication features |
| 2969 kN | 5100 kN | 800 rpm | 1200 rpm | 101 kg101000 g |
| SKF24064 CC/C3W33Spherical roller bearing with relubrication features |
| 2969 kN | 5100 kN | 800 rpm | 1200 rpm | 101 kg101000 g |
| SKF24064 CC/C4W33Spherical roller bearing with relubrication features |
| 2969 kN | 5100 kN | 800 rpm | 1200 rpm | 101 kg101000 g |
| SKF24064 CCK30/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 2969 kN | 5100 kN | 800 rpm | 1200 rpm | 99.8 kg99800 g |
| SKF24064 CCK30/W33Spherical roller bearing with tapered bore and relubrication features |
| 2969 kN | 5100 kN | 800 rpm | 1200 rpm | 99.8 kg99800 g |
| SKF24064 CC/W33Spherical roller bearing with relubrication features |
| 2969 kN | 5100 kN | 800 rpm | 1200 rpm | 101 kg101000 g |
| SKF24064 CC/W513Spherical roller bearing with relubrication features |
| 2969 kN | 5100 kN | 800 rpm | 1200 rpm | 101 kg101000 g |
| FAG24064-BEA-XL-K30-MB1Spherical Roller Bearing |
| 2950 kN | 5200 kN | 670 rpm | 1200 rpm | 99.54 kg99540 g |
| FAG24064-BEA-XL-K30-MB1-C3Spherical Roller Bearing |
| 2950 kN | 5200 kN | 670 rpm | 1200 rpm | 99.435 kg99435 g |
| FAG24064-BEA-XL-K30-MB1-C5Spherical Roller Bearing |
| 2950 kN | 5200 kN | 670 rpm | 1200 rpm | 99.375 kg99375 g |
| FAG24064-BEA-XL-MB1Spherical Roller Bearing |
| 2950 kN | 5200 kN | 670 rpm | 1200 rpm | 101.175 kg101175 g |
| FAG24064-BEA-XL-MB1-C2Spherical Roller Bearing |
| 2950 kN | 5200 kN | 670 rpm | 1200 rpm | 101.16 kg101160 g |
| FAG24064-BEA-XL-MB1-C3Spherical Roller Bearing |
| 2950 kN | 5200 kN | 670 rpm | 1200 rpm | 101.155 kg101155 g |
| FAG24064-BEA-XL-MB1-C5Spherical Roller Bearing |
| 2950 kN | 5200 kN | 670 rpm | 1200 rpm | 101.15 kg101150 g |
| TIMKEN24064EJW33W45ASpherical roller bearing |
| 3130 kN | 5380 kN | — | — | 98.94 kg98940 g |
| TIMKEN24064EJW33W45AC2Spherical roller bearing |
| 3130 kN | 5380 kN | — | — | 98.94 kg98940 g |
| TIMKEN24064EJW33W45AC3Spherical roller bearing |
| 3130 kN | 5380 kN | — | — | 98.94 kg98940 g |
| TIMKEN24064EJW33W45AC4Spherical roller bearing |
| 3130 kN | 5380 kN | — | — | 98.94 kg98940 g |
| TIMKEN24064EMBW33W45ASpherical roller bearing |
| 3130 kN | 5380 kN | — | — | 101.98 kg101980 g |
| TIMKEN24064EMBW33W45AC3Spherical roller bearing |
| 3130 kN | 5380 kN | — | — | 101.98 kg101980 g |
| TIMKEN24064EMBW33W45AC4Spherical roller bearing |
| 3130 kN | 5380 kN | — | — | 101.98 kg101980 g |
| TIMKEN24064KEJW33W45ASpherical roller bearing |
| 3130 kN | 5380 kN | — | — | 97.15 kg97150 g |
| TIMKEN24064KEJW33W45AC2Spherical roller bearing |
| 3130 kN | 5380 kN | — | — | 97.15 kg97150 g |
| TIMKEN24064KEJW33W45AC3Spherical roller bearing |
| 3130 kN | 5380 kN | — | — | 97.15 kg97150 g |
| TIMKEN24064KEJW33W45AC4Spherical roller bearing |
| 3130 kN | 5380 kN | — | — | 97.15 kg97150 g |
| TIMKEN24064KEMBW33W45AC3Spherical roller bearing |
| 3130 kN | 5380 kN | — | — | 100.24 kg100240 g |
| NSK24064CAME4Spherical roller bearing |
| 3050 kN | 5050 kN | — | — | 99.7 kg99700 g |
| NSK24064CAMK30E4Spherical roller bearing |
| 3050 kN | 5050 kN | — | — | — |
| KOYO24064RHASpherical roller bearing |
| 3060 kN | 5230 kN | — | 590 rpmLimiting Speeds(Grease Lub.): 590 min-1Limiting Speeds(Oil Lub.): 790 min-1 | 93.4 kg93400 g |
| KOYO24064RHAK30+AH24064Spherical roller bearing |
| 3060 kN | 5230 kN | — | 590 rpmLimiting Speeds(Grease Lub.): 590 min-1Limiting Speeds(Oil Lub.): 790 min-1 | 108 kg108000 g |
| KOYO24064RRSpherical roller bearing |
| 3020 kN | 4920 kN | — | 590 rpmLimiting Speeds(Grease Lub.): 590 min-1Limiting Speeds(Oil Lub.): 790 min-1 | 105 kg105000 g |
| KOYO24064RRK30+AH24064Spherical roller bearing |
| 3020 kN | 4920 kN | — | 590 rpmLimiting Speeds(Grease Lub.): 590 min-1Limiting Speeds(Oil Lub.): 790 min-1 | 120 kg120000 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 24064 CC/C08W33 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 24064 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24064 CC/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 24064 CCK30/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24064 CCK30/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 24064 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 24064 CC/W513 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| FAG 24064-BEA-XL-K30-MB1 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 24064-BEA-XL-K30-MB1-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 24064-BEA-XL-K30-MB1-C5 | Not recorded | Not recorded | Not recorded | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 24064-BEA-XL-MB1 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 24064-BEA-XL-MB1-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 24064-BEA-XL-MB1-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 24064-BEA-XL-MB1-C5 | Not recorded | Not recorded | Not recorded | MB1 — Solid brass cage | Not recorded | Not recorded |
| TIMKEN 24064EJW33W45A | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24064EJW33W45AC2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24064EJW33W45AC3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24064EJW33W45AC4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24064EMBW33W45A | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24064EMBW33W45AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24064EMBW33W45AC4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24064KEJW33W45A | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24064KEJW33W45AC2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24064KEJW33W45AC3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24064KEJW33W45AC4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24064KEMBW33W45AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 24064CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 24064CAMK30E4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| KOYO 24064RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24064RHAK30+AH24064 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24064RR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24064RRK30+AH24064 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
FAG
24064-BEA-XL-K30-MB1
Spherical Roller Bearing
View full technical record →FAG24064-BEA-XL-K30-MB1-C3
Spherical Roller Bearing
View full technical record →FAG24064-BEA-XL-K30-MB1-C5
Spherical Roller Bearing
View full technical record →FAG24064-BEA-XL-MB1
Spherical Roller Bearing
View full technical record →FAG24064-BEA-XL-MB1-C2
Spherical Roller Bearing
View full technical record →FAG24064-BEA-XL-MB1-C3
Spherical Roller Bearing
View full technical record →FAG24064-BEA-XL-MB1-C5
Spherical Roller Bearing
View full technical record →NSK24064CAME4
Spherical roller bearing
View full technical record →NSK24064CAMK30E4
Spherical roller bearing
View full technical record →SKF24064 CC/C08W33
Spherical roller bearing with relubrication features
View full technical record →SKF24064 CC/C3W33
Spherical roller bearing with relubrication features
View full technical record →SKF24064 CC/C4W33
Spherical roller bearing with relubrication features
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.