Find · understand · compare
24056 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 24056. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
24056 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 37 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF24056-2CS5K30/VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features |
| 2251 kN | 3800 kN | — | 440 rpm | 66.7 kg66700 g |
| SKF24056-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 2251 kN | 3800 kN | — | 440 rpm | 67.7 kg67700 g |
| SKF24056 CC/C2W33Spherical roller bearing with relubrication features |
| 2248 kN | 3800 kN | 950 rpm | 1400 rpm | 67.6 kg67600 g |
| SKF24056 CC/C3W33Spherical roller bearing with relubrication features |
| 2248 kN | 3800 kN | 950 rpm | 1400 rpm | 67.6 kg67600 g |
| SKF24056 CCK30/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 2248 kN | 3800 kN | 950 rpm | 1400 rpm | 66.5 kg66500 g |
| SKF24056 CCK30/W33Spherical roller bearing with tapered bore and relubrication features |
| 2248 kN | 3800 kN | 950 rpm | 1400 rpm | 66.5 kg66500 g |
| SKF24056 CC/W33Spherical roller bearing with relubrication features |
| 2248 kN | 3800 kN | 950 rpm | 1400 rpm | 67.6 kg67600 g |
| FAG24056-BE-XLSpherical Roller Bearing |
| 2290 kN | 3950 kN | 800 rpm | 1420 rpm | 67.21 kg67210 g |
| FAG24056-BE-XL-C2Spherical Roller Bearing |
| 2290 kN | 3950 kN | 800 rpm | 1420 rpm | 67.25 kg67250 g |
| FAG24056-BE-XL-C3Spherical Roller Bearing |
| 2290 kN | 3950 kN | 800 rpm | 1420 rpm | 67.16 kg67160 g |
| FAG24056-BE-XL-C4Spherical Roller Bearing |
| 2290 kN | 3950 kN | 800 rpm | 1420 rpm | 67.2 kg67200 g |
| FAG24056-BE-XL-K30Spherical Roller Bearing |
| 2290 kN | 3950 kN | 800 rpm | 1420 rpm | 66.17 kg66170 g |
| FAG24056-BE-XL-K30-C3Spherical Roller Bearing |
| 2290 kN | 3950 kN | 800 rpm | 1420 rpm | 66.08 kg66080 g |
| FAG24056-BE-XL-K30-C4Spherical Roller Bearing |
| 2290 kN | 3950 kN | 800 rpm | 1420 rpm | 66.11 kg66110 g |
| TIMKEN24056EJW33Spherical roller bearing |
| 2420 kN | 4090 kN | — | — | 66.08 kg66080 g |
| TIMKEN24056EJW33C2Spherical roller bearing |
| 2420 kN | 4090 kN | — | — | 66.08 kg66080 g |
| TIMKEN24056EJW33C3Spherical roller bearing |
| 2420 kN | 4090 kN | — | — | 66.08 kg66080 g |
| TIMKEN24056EJW33C4Spherical roller bearing |
| 2420 kN | 4090 kN | — | — | 66.08 kg66080 g |
| TIMKEN24056EMBW33Spherical roller bearing |
| 2420 kN | 4090 kN | — | — | 68.05 kg68050 g |
| TIMKEN24056EMBW33C2Spherical roller bearing |
| 2420 kN | 4090 kN | — | — | 68.05 kg68050 g |
| TIMKEN24056EMBW33C3Spherical roller bearing |
| 2420 kN | 4090 kN | — | — | 68.05 kg68050 g |
| TIMKEN24056EMBW33C4Spherical roller bearing |
| 2420 kN | 4090 kN | — | — | 68.05 kg68050 g |
| TIMKEN24056EMBW33W40ESpherical roller bearing |
| 2420 kN | 4090 kN | — | — | 68.06 kg68060 g |
| TIMKEN24056EMBW507C08S2C5Spherical roller bearing |
| 2420 kN | 4090 kN | — | — | 68.05 kg68050 g |
| TIMKEN24056KEJW33Spherical roller bearing |
| 2420 kN | 4090 kN | — | — | 64.92 kg64920 g |
| TIMKEN24056KEJW33C2Spherical roller bearing |
| 2420 kN | 4090 kN | — | — | 64.92 kg64920 g |
| TIMKEN24056KEJW33C3Spherical roller bearing |
| 2420 kN | 4090 kN | — | — | 64.92 kg64920 g |
| TIMKEN24056KEJW33C4Spherical roller bearing |
| 2420 kN | 4090 kN | — | — | 64.92 kg64920 g |
| TIMKEN24056KEMBW33Spherical roller bearing |
| 2420 kN | 4090 kN | — | — | 66.89 kg66890 g |
| TIMKEN24056KEMBW33C3Spherical roller bearing |
| 2420 kN | 4090 kN | — | — | 66.89 kg66890 g |
| TIMKEN24056KEMBW33W40C3Spherical roller bearing |
| 2220 kN | 4090 kN | — | — | 66.89 kg66890 g |
| NSK24056CAME4Spherical roller bearing |
| 2350 kN | 3800 kN | — | — | 66.4 kg66400 g |
| NSK24056CAMK30E4Spherical roller bearing |
| 2350 kN | 3800 kN | — | — | — |
| KOYO24056RHASpherical roller bearing |
| 2390 kN | 4000 kN | — | 710 rpmLimiting Speeds(Grease Lub.): 710 min-1Limiting Speeds(Oil Lub.): 950 min-1 | 64 kg64000 g |
| KOYO24056RHAK30+AH24056Spherical roller bearing |
| 2390 kN | 4000 kN | — | 710 rpmLimiting Speeds(Grease Lub.): 710 min-1Limiting Speeds(Oil Lub.): 950 min-1 | 75.7 kg75700 g |
| KOYO24056RRSpherical roller bearing |
| 2370 kN | 3780 kN | — | 710 rpmLimiting Speeds(Grease Lub.): 710 min-1Limiting Speeds(Oil Lub.): 950 min-1 | 70.2 kg70200 g |
| KOYO24056RRK30+AH24056Spherical roller bearing |
| 2370 kN | 3780 kN | — | 710 rpmLimiting Speeds(Grease Lub.): 710 min-1Limiting Speeds(Oil Lub.): 950 min-1 | 81.9 kg81900 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 24056-2CS5K30/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 24056-2CS5/VT143 | Seal on both sides | Not recorded | CN | Sheet metal | Not recorded | Grease |
| SKF 24056 CC/C2W33 | Without | Not recorded | C2 | Sheet metal | Not recorded | None |
| SKF 24056 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24056 CCK30/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24056 CCK30/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 24056 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 24056-BE-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24056-BE-XL-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24056-BE-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24056-BE-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24056-BE-XL-K30 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24056-BE-XL-K30-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24056-BE-XL-K30-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 24056EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24056EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24056EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24056EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24056EMBW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24056EMBW33C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24056EMBW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24056EMBW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24056EMBW33W40E | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24056EMBW507C08S2C5 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24056KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24056KEJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24056KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24056KEJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24056KEMBW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24056KEMBW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24056KEMBW33W40C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 24056CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 24056CAMK30E4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| KOYO 24056RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24056RHAK30+AH24056 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24056RR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24056RRK30+AH24056 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
240/560 BC
Spherical roller bearing for wind turbine main shafts
View full technical record →FAG240/560-BEA-XL-K30-MB1
Spherical Roller Bearing
View full technical record →FAG240/560-BEA-XL-K30-MB1-C3
Spherical Roller Bearing
View full technical record →FAG240/560-BEA-XL-MB1
Spherical Roller Bearing
View full technical record →FAG240/560-BEA-XL-MB1-C3
Spherical Roller Bearing
View full technical record →FAG240/560-B-MB
Spherical Roller Bearing
View full technical record →NSK240/560CAME4
Spherical roller bearing
View full technical record →NSK240/560CAMK30E4
Spherical roller bearing
View full technical record →SKF240/560 ECA/C3W33
Spherical roller bearing with relubrication features
View full technical record →SKF240/560 ECAK30/W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF240/560 ECA/W33
Spherical roller bearing with relubrication features
View full technical record →TIMKEN240/560KYMBW33W45A
Spherical roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.