Find · understand · compare
24048 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 24048. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
24048 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 43 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF24048-2CS5K30/VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features |
| 1666 kN | 2700 kN | — | 510 rpm | 40.9 kg40900 g |
| SKF24048-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 1666 kN | 2700 kN | — | 510 rpm | 41.5 kg41500 g |
| SKF24048 CC/C3W33Spherical roller bearing with relubrication features |
| 1663 kN | 2700 kN | 1100 rpm | 1600 rpm | 41.5 kg41500 g |
| SKF24048 CC/C4W33Spherical roller bearing with relubrication features |
| 1663 kN | 2700 kN | 1100 rpm | 1600 rpm | 41.5 kg41500 g |
| SKF24048 CC/HA3C3W33Spherical roller bearing with relubrication features |
| 1663 kN | 2700 kN | 1100 rpm | 1600 rpm | 43 kg43000 g |
| SKF24048 CC/HA3C4W33Spherical roller bearing with relubrication features |
| 1663 kN | 2700 kN | 1100 rpm | 1600 rpm | 41.9 kg41900 g |
| SKF24048 CCK30/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 1663 kN | 2700 kN | 1100 rpm | 1600 rpm | 40.8 kg40800 g |
| SKF24048 CCK30/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 1663 kN | 2700 kN | 1100 rpm | 1600 rpm | 40.8 kg40800 g |
| SKF24048 CCK30/HA3C3W33Spherical roller bearing with tapered bore and relubrication features |
| 1663 kN | 2700 kN | 1100 rpm | 1600 rpm | 41.9 kg41900 g |
| SKF24048 CCK30/HA3C4W33Spherical roller bearing with tapered bore and relubrication features |
| 1663 kN | 2700 kN | 1100 rpm | 1600 rpm | 42.5 kg42500 g |
| SKF24048 CCK30/W33Spherical roller bearing with tapered bore and relubrication features |
| 1663 kN | 2700 kN | 1100 rpm | 1600 rpm | 40.8 kg40800 g |
| SKF24048 CC/W33Spherical roller bearing with relubrication features |
| 1663 kN | 2700 kN | 1100 rpm | 1600 rpm | 41.5 kg41500 g |
| FAG24048-BE-XLSpherical Roller Bearing |
| 1670 kN | 2850 kN | 980 rpm | 1710 rpm | 41.61 kg41610 g |
| FAG24048-BE-XL-C2Spherical Roller Bearing |
| 1670 kN | 2850 kN | 980 rpm | 1710 rpm | 41.65 kg41650 g |
| FAG24048-BE-XL-C3Spherical Roller Bearing |
| 1670 kN | 2850 kN | 980 rpm | 1710 rpm | 44.1 kg44100 g |
| FAG24048-BE-XL-C4Spherical Roller Bearing |
| 1670 kN | 2850 kN | 980 rpm | 1710 rpm | 41.53 kg41530 g |
| FAG24048-BE-XL-C5Spherical Roller Bearing |
| 1670 kN | 2850 kN | 980 rpm | 1710 rpm | 41.5 kg41500 g |
| FAG24048-BE-XL-H40ABSpherical Roller Bearing |
| 1670 kN | 2850 kN | 980 rpm | 1710 rpm | 42.5 kg42500 g |
| FAG24048-BE-XL-K30Spherical Roller Bearing |
| 1670 kN | 2850 kN | 980 rpm | 1710 rpm | 41.255 kg41255 g |
| FAG24048-BE-XL-K30-C3Spherical Roller Bearing |
| 1670 kN | 2850 kN | 980 rpm | 1710 rpm | 40.91 kg40910 g |
| FAG24048-BE-XL-K30-C4Spherical Roller Bearing |
| 1670 kN | 2850 kN | 980 rpm | 1710 rpm | 40.885 kg40885 g |
| TIMKEN24048EJW33Spherical roller bearing |
| 1790 kN | 2900 kN | — | — | 40.41 kg40410 g |
| TIMKEN24048EJW33C2Spherical roller bearing |
| 1790 kN | 2900 kN | — | — | 40.41 kg40410 g |
| TIMKEN24048EJW33C3Spherical roller bearing |
| 1790 kN | 2900 kN | — | — | 40.41 kg40410 g |
| TIMKEN24048EJW33C4Spherical roller bearing |
| 1790 kN | 2900 kN | — | — | 40.41 kg40410 g |
| TIMKEN24048EMBW33Spherical roller bearing |
| 1790 kN | 2900 kN | — | — | 41.76 kg41760 g |
| TIMKEN24048EMBW33C2Spherical roller bearing |
| 1790 kN | 2900 kN | — | — | 41.76 kg41760 g |
| TIMKEN24048EMBW33C3Spherical roller bearing |
| 1790 kN | 2900 kN | — | — | 41.76 kg41760 g |
| TIMKEN24048EMBW33C4Spherical roller bearing |
| 1790 kN | 2900 kN | — | — | 41.76 kg41760 g |
| TIMKEN24048EMBW33W25ASpherical roller bearing |
| 1790 kN | 2900 kN | — | — | 41.75 kg41750 g |
| TIMKEN24048KEJW33C3Spherical roller bearing |
| 1790 kN | 2900 kN | — | — | 39.63 kg39630 g |
| TIMKEN24048KEMBW33Spherical roller bearing |
| 1790 kN | 2900 kN | — | — | 41.05 kg41050 g |
| TIMKEN24048KEMBW33C3Spherical roller bearing |
| 1790 kN | 2900 kN | — | — | 41.05 kg41050 g |
| TIMKEN24048KEMBW33W40Spherical roller bearing |
| 1790 kN | 2900 kN | — | — | 40.97 kg40970 g |
| TIMKEN24048KEMDW33C3Spherical roller bearing |
| 1790 kN | 2900 kN | — | — | 40.97 kg40970 g |
| NSK24048CAME4Spherical roller bearing |
| 1730 kN | 2730 kN | — | — | 43.4 kg43400 g |
| NSK24048CAMK30E4Spherical roller bearing |
| 1730 kN | 2730 kN | — | — | — |
| NSK24048CE4Spherical roller bearing |
| 1730 kN | 2730 kN | — | — | 43.4 kg43400 g |
| NSK24048CK30E4Spherical roller bearing |
| 1730 kN | 2730 kN | — | — | — |
| KOYO24048RHASpherical roller bearing |
| 1750 kN | 2840 kN | — | 870 rpmLimiting Speeds(Grease Lub.): 870 min-1Limiting Speeds(Oil Lub.): 1200 min-1 | 39.6 kg39600 g |
| KOYO24048RHAK30+AH24048Spherical roller bearing |
| 1750 kN | 2840 kN | — | 870 rpmLimiting Speeds(Grease Lub.): 870 min-1Limiting Speeds(Oil Lub.): 1200 min-1 | 48 kg48000 g |
| KOYO24048RRSpherical roller bearing |
| 1750 kN | 2710 kN | — | 870 rpmLimiting Speeds(Grease Lub.): 870 min-1Limiting Speeds(Oil Lub.): 1200 min-1 | 43.5 kg43500 g |
| KOYO24048RRK30+AH24048Spherical roller bearing |
| 1750 kN | 2710 kN | — | 870 rpmLimiting Speeds(Grease Lub.): 870 min-1Limiting Speeds(Oil Lub.): 1200 min-1 | 51.9 kg51900 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 24048-2CS5K30/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 24048-2CS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 24048 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24048 CC/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 24048 CC/HA3C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24048 CC/HA3C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 24048 CCK30/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24048 CCK30/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 24048 CCK30/HA3C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24048 CCK30/HA3C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 24048 CCK30/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 24048 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 24048-BE-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24048-BE-XL-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24048-BE-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24048-BE-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24048-BE-XL-C5 | Not recorded | Not recorded | C5 (Group 5) — Internal clearance larger than C4 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24048-BE-XL-H40AB | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24048-BE-XL-K30 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24048-BE-XL-K30-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24048-BE-XL-K30-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 24048EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24048EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24048EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24048EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24048EMBW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24048EMBW33C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24048EMBW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24048EMBW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24048EMBW33W25A | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24048KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24048KEMBW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24048KEMBW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24048KEMBW33W40 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24048KEMDW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 24048CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 24048CAMK30E4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 24048CE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 24048CK30E4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 24048RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24048RHAK30+AH24048 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24048RR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24048RRK30+AH24048 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
24048-2CS5K30/VT143
Spherical roller bearing with tapered bore, integral sealing and relubrication features
View full technical record →SKF24048-2CS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →FAG24048-BE-XL
Spherical Roller Bearing
View full technical record →FAG24048-BE-XL-C2
Spherical Roller Bearing
View full technical record →FAG24048-BE-XL-C3
Spherical Roller Bearing
View full technical record →FAG24048-BE-XL-C4
Spherical Roller Bearing
View full technical record →FAG24048-BE-XL-C5
Spherical Roller Bearing
View full technical record →FAG24048-BE-XL-H40AB
Spherical Roller Bearing
View full technical record →FAG24048-BE-XL-K30
Spherical Roller Bearing
View full technical record →FAG24048-BE-XL-K30-C3
Spherical Roller Bearing
View full technical record →FAG24048-BE-XL-K30-C4
Spherical Roller Bearing
View full technical record →NSK24048CAME4
Spherical roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.