Find · understand · compare
24044 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 24044. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
24044 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 36 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF24044-2CS5K30/VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features |
| 1629 kN | 2600 kN | — | 550 rpm | 38.6 kg38600 g |
| SKF24044-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 1629 kN | 2600 kN | — | 550 rpm | 39 kg39000 g |
| SKF24044 CC/C2W33Spherical roller bearing with relubrication features |
| 1628 kN | 2600 kN | 1200 rpm | 1700 rpm | 38.9 kg38900 g |
| SKF24044 CC/C3W33Spherical roller bearing with relubrication features |
| 1628 kN | 2600 kN | 1200 rpm | 1700 rpm | 38.9 kg38900 g |
| SKF24044 CCK30/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 1628 kN | 2600 kN | 1200 rpm | 1700 rpm | 38.3 kg38300 g |
| SKF24044 CCK30/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 1628 kN | 2600 kN | 1200 rpm | 1700 rpm | 38.3 kg38300 g |
| SKF24044 CCK30/W33Spherical roller bearing with tapered bore and relubrication features |
| 1628 kN | 2600 kN | 1200 rpm | 1700 rpm | 38.3 kg38300 g |
| SKF24044 CC/W33Spherical roller bearing with relubrication features |
| 1628 kN | 2600 kN | 1200 rpm | 1700 rpm | 38.9 kg38900 g |
| FAG24044-BE-XLSpherical Roller Bearing |
| 1620 kN | 2600 kN | 1090 rpm | 1830 rpm | 38.375 kg38375 g |
| FAG24044-BE-XL-C3Spherical Roller Bearing |
| 1620 kN | 2600 kN | 1090 rpm | 1830 rpm | 38.32 kg38320 g |
| FAG24044-BE-XL-C4Spherical Roller Bearing |
| 1620 kN | 2600 kN | 1090 rpm | 1830 rpm | 38.37 kg38370 g |
| FAG24044-BE-XL-C5Spherical Roller Bearing |
| 1620 kN | 2600 kN | 1090 rpm | 1830 rpm | 38.36 kg38360 g |
| FAG24044-BE-XL-K30Spherical Roller Bearing |
| 1620 kN | 2600 kN | 1090 rpm | 1830 rpm | 37.76 kg37760 g |
| FAG24044-BE-XL-K30-C3Spherical Roller Bearing |
| 1620 kN | 2600 kN | 1090 rpm | 1830 rpm | 37.725 kg37725 g |
| FAG24044-BE-XL-K30-C4Spherical Roller Bearing |
| 1620 kN | 2600 kN | 1090 rpm | 1830 rpm | 37.7 kg37700 g |
| TIMKEN24044EJW33Spherical roller bearing |
| 1720 kN | 2720 kN | — | — | 38.04 kg38040 g |
| TIMKEN24044EJW33C2Spherical roller bearing |
| 1720 kN | 2720 kN | — | — | 38.04 kg38040 g |
| TIMKEN24044EJW33C3Spherical roller bearing |
| 1720 kN | 2720 kN | — | — | 38.04 kg38040 g |
| TIMKEN24044EJW33C4Spherical roller bearing |
| 1720 kN | 2720 kN | — | — | 38.04 kg38040 g |
| TIMKEN24044EMBW33Spherical roller bearing |
| 1720 kN | 2720 kN | — | — | 39.34 kg39340 g |
| TIMKEN24044EMBW33C08Spherical roller bearing |
| 1720 kN | 2720 kN | — | — | 39.34 kg39340 g |
| TIMKEN24044EMBW33C08C3Spherical roller bearing |
| 1720 kN | 2720 kN | — | — | 39.34 kg39340 g |
| TIMKEN24044EMBW33C2Spherical roller bearing |
| 1720 kN | 2720 kN | — | — | 39.34 kg39340 g |
| TIMKEN24044EMBW33C3Spherical roller bearing |
| 1720 kN | 2720 kN | — | — | 39.34 kg39340 g |
| TIMKEN24044EMBW33C4Spherical roller bearing |
| 1720 kN | 2720 kN | — | — | 39.34 kg39340 g |
| TIMKEN24044KEMBW33Spherical roller bearing |
| 1720 kN | 2720 kN | — | — | 38.7 kg38700 g |
| TIMKEN24044KEMBW33C2Spherical roller bearing |
| 1720 kN | 2720 kN | — | — | 38.7 kg38700 g |
| TIMKEN24044KEMBW33C3Spherical roller bearing |
| 1720 kN | 2720 kN | — | — | 38.7 kg38700 g |
| NSK24044CAME4Spherical roller bearing |
| 1640 kN | 2490 kN | — | — | 40.5 kg40500 g |
| NSK24044CAMK30E4Spherical roller bearing |
| 1640 kN | 2490 kN | — | — | — |
| NSK24044CE4Spherical roller bearing |
| 1700 kN | 2600 kN | — | — | 40.5 kg40500 g |
| NSK24044CK30E4Spherical roller bearing |
| 1700 kN | 2600 kN | — | — | — |
| KOYO24044RHASpherical roller bearing |
| 1680 kN | 2630 kN | — | 950 rpmLimiting Speeds(Grease Lub.): 950 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 37 kg37000 g |
| KOYO24044RHAK30+AH24044Spherical roller bearing |
| 1680 kN | 2630 kN | — | 950 rpmLimiting Speeds(Grease Lub.): 950 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 44.7 kg44700 g |
| KOYO24044RRSpherical roller bearing |
| 1660 kN | 2480 kN | — | 950 rpmLimiting Speeds(Grease Lub.): 950 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 40.5 kg40500 g |
| KOYO24044RRK30+AH24044Spherical roller bearing |
| 1660 kN | 2480 kN | — | 950 rpmLimiting Speeds(Grease Lub.): 950 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 48.1 kg48100 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 24044-2CS5K30/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 24044-2CS5/VT143 | Seal on both sides | Not recorded | CN | Sheet metal | Not recorded | Grease |
| SKF 24044 CC/C2W33 | Without | Not recorded | C2 | Sheet metal | Not recorded | None |
| SKF 24044 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24044 CCK30/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24044 CCK30/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 24044 CCK30/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 24044 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 24044-BE-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24044-BE-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24044-BE-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24044-BE-XL-C5 | Not recorded | Not recorded | C5 (Group 5) — Internal clearance larger than C4 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24044-BE-XL-K30 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24044-BE-XL-K30-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24044-BE-XL-K30-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 24044EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24044EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24044EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24044EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24044EMBW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24044EMBW33C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24044EMBW33C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24044EMBW33C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24044EMBW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24044EMBW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24044KEMBW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24044KEMBW33C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24044KEMBW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 24044CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 24044CAMK30E4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 24044CE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 24044CK30E4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 24044RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24044RHAK30+AH24044 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24044RR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24044RRK30+AH24044 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
24044-2CS5K30/VT143
Spherical roller bearing with tapered bore, integral sealing and relubrication features
View full technical record →SKF24044-2CS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →FAG24044-BE-XL
Spherical Roller Bearing
View full technical record →FAG24044-BE-XL-C3
Spherical Roller Bearing
View full technical record →FAG24044-BE-XL-C4
Spherical Roller Bearing
View full technical record →FAG24044-BE-XL-C5
Spherical Roller Bearing
View full technical record →FAG24044-BE-XL-K30
Spherical Roller Bearing
View full technical record →FAG24044-BE-XL-K30-C3
Spherical Roller Bearing
View full technical record →FAG24044-BE-XL-K30-C4
Spherical Roller Bearing
View full technical record →NSK24044CAME4
Spherical roller bearing
View full technical record →NSK24044CAMK30E4
Spherical roller bearing
View full technical record →SKF24044 CC/C2W33
Spherical roller bearing with relubrication features
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.