Find · understand · compare
24030 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 24030. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
24030 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 46 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF24030-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 681 kN | 1040 kN | — | 800 rpm | 10.3 kg10300 g |
| SKF24030-2CS5W/C3GEM9Spherical roller bearing with integral sealing |
| 681 kN | 1040 kN | — | 0 rpm | 10.3 kg10300 g |
| SKF24030/C3W33VA9B1Spherical roller bearing for continuous casters, with relubrication features |
| — | 1040 kN | — | 20 rpm | 10.5 kg10500 g |
| SKF24030/C4W33VA9B1Spherical roller bearing for continuous casters, with relubrication features |
| — | 1040 kN | — | 20 rpm | 10.1 kg10100 g |
| SKF24030 CC/C3W33Spherical roller bearing with relubrication features |
| 680 kN | 1040 kN | 1800 rpm | 2600 rpm | 10.3 kg10300 g |
| SKF24030 CC/C4W33Spherical roller bearing with relubrication features |
| 680 kN | 1040 kN | 1800 rpm | 2600 rpm | 10.3 kg10300 g |
| SKF24030 CCK30/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 680 kN | 1040 kN | 1800 rpm | 2600 rpm | 10.1 kg10100 g |
| SKF24030 CCK30/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 680 kN | 1040 kN | 1800 rpm | 2600 rpm | 10.1 kg10100 g |
| SKF24030 CCK30/W33Spherical roller bearing with tapered bore and relubrication features |
| 680 kN | 1040 kN | 1800 rpm | 2600 rpm | 10.1 kg10100 g |
| SKF24030 CC/W33Spherical roller bearing with relubrication features |
| 680 kN | 1040 kN | 1800 rpm | 2600 rpm | 10.3 kg10300 g |
| FAG24030-BE-XLSpherical Roller Bearing |
| 680 kN | 1090 kN | 1790 rpm | 2750 rpm | 10.334 kg10334 g |
| FAG24030-BE-XL-2VSRSpherical Roller Bearing |
| 680 kN | 1090 kN | — | 690 rpm | 10.345 kg10345 g |
| FAG24030-BE-XL-2VSR-C3Spherical Roller Bearing |
| 680 kN | 1090 kN | — | 690 rpm | 10.348 kg10348 g |
| FAG24030-BE-XL-2VSR-H40Spherical Roller Bearing |
| 680 kN | 1090 kN | — | 690 rpm | 10.38 kg10380 g |
| FAG24030-BE-XL-2VSR-H40-C4Spherical Roller Bearing |
| 680 kN | 1090 kN | — | 690 rpm | 10.5 kg10500 g |
| FAG24030-BE-XL>ASpherical Roller Bearing |
| 680 kN | 1090 kN | 1790 rpm | 2750 rpm | 10.5 kg10500 g |
| FAG24030-BE-XL-C3Spherical Roller Bearing |
| 680 kN | 1090 kN | 1790 rpm | 2750 rpm | 10.334 kg10334 g |
| FAG24030-BE-XL-C3>ASpherical Roller Bearing |
| 680 kN | 1090 kN | 1790 rpm | 2750 rpm | 10.5 kg10500 g |
| FAG24030-BE-XL-C4Spherical Roller Bearing |
| 680 kN | 1090 kN | 1790 rpm | 2750 rpm | 10.334 kg10334 g |
| FAG24030-BE-XL-H40-C3Spherical Roller Bearing |
| 680 kN | 1090 kN | 1790 rpm | 2750 rpm | 10.368 kg10368 g |
| FAG24030-BE-XL-K30Spherical Roller Bearing |
| 680 kN | 1090 kN | 1790 rpm | 2750 rpm | 10.171 kg10171 g |
| FAG24030-BE-XL-K30>ASpherical Roller Bearing |
| 680 kN | 1090 kN | 1790 rpm | 2750 rpm | 10.171 kg10171 g |
| FAG24030-BE-XL-K30-C3Spherical Roller Bearing |
| 680 kN | 1090 kN | 1790 rpm | 2750 rpm | 10.166 kg10166 g |
| FAG24030-BE-XL-K30-C3>ASpherical Roller Bearing |
| 680 kN | 1090 kN | 1790 rpm | 2750 rpm | 10.166 kg10166 g |
| FAG24030-BE-XL-K30-C4Spherical Roller Bearing |
| 680 kN | 1090 kN | 1790 rpm | 2750 rpm | 10.161 kg10161 g |
| FAG24030-CP-C3Spherical Roller Bearing |
| — | 1090 kN | — | 25 rpm | 10.462 kg10462 g |
| FAG24030-CP-C4Spherical Roller Bearing |
| — | 1090 kN | — | 25 rpm | 10.4 kg10400 g |
| TIMKEN24030EJW33Spherical roller bearing |
| 808 kN | 1240 kN | — | — | 10.14 kg10140 g |
| TIMKEN24030EJW33C2Spherical roller bearing |
| 808 kN | 1240 kN | — | — | 10.14 kg10140 g |
| TIMKEN24030EJW33C3Spherical roller bearing |
| 808 kN | 1240 kN | — | — | 10.14 kg10140 g |
| TIMKEN24030EJW33C4Spherical roller bearing |
| 808 kN | 1240 kN | — | — | 10.14 kg10140 g |
| TIMKEN24030EJW33W89C3Spherical roller bearing |
| 808 kN | 1240 kN | — | — | 10.14 kg10140 g |
| TIMKEN24030EJW841Spherical roller bearing |
| 808 kN | 1240 kN | — | — | 10.26 kg10260 g |
| TIMKEN24030EJW841C3Spherical roller bearing |
| 808 kN | 1240 kN | — | — | 10.26 kg10260 g |
| TIMKEN24030EJW841C4Spherical roller bearing |
| 808 kN | 1240 kN | — | — | 10.26 kg10260 g |
| TIMKEN24030EMW33C3Spherical roller bearing |
| 808 kN | 1240 kN | — | — | 10.3 kg10300 g |
| TIMKEN24030KEJW33Spherical roller bearing |
| 808 kN | 1240 kN | — | — | 9.97 kg9970 g |
| TIMKEN24030KEJW33C3Spherical roller bearing |
| 808 kN | 1240 kN | — | — | 9.97 kg9970 g |
| TIMKEN24030KEMW33Spherical roller bearing |
| 808 kN | 1240 kN | — | — | 10.12 kg10120 g |
| TIMKEN24030KEMW33C3Spherical roller bearing |
| 808 kN | 1240 kN | — | — | 10.12 kg10120 g |
| NSK24030CAME4Spherical roller bearing |
| 740 kN | 1090 kN | — | — | 10.5 kg10500 g |
| NSK24030CAMK30E4Spherical roller bearing |
| 740 kN | 1090 kN | — | — | — |
| NSK24030CE4Spherical roller bearing |
| 740 kN | 1090 kN | — | — | 10.5 kg10500 g |
| NSK24030CK30E4Spherical roller bearing |
| 740 kN | 1090 kN | — | — | — |
| KOYO24030RHSpherical roller bearing |
| 724 kN | 1100 kN | — | 1900 rpmLimiting Speeds(Grease Lub.): 1900 min-1Limiting Speeds(Oil Lub.): 2500 min-1 | 10.6 kg10600 g |
| KOYO24030RZK30+AH24030Spherical roller bearing |
| 724 kN | 1100 kN | — | 1900 rpmLimiting Speeds(Grease Lub.): 1900 min-1Limiting Speeds(Oil Lub.): 2500 min-1 | 11.4 kg11400 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 24030-2CS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 24030-2CS5W/C3GEM9 | Seal on both sides | Not recorded | C3 | Sheet metal | Not recorded | Grease |
| SKF 24030/C3W33VA9B1 | Without | Normal | C3 | Sheet metal | Not recorded | None |
| SKF 24030/C4W33VA9B1 | Without | Normal | C4 | Sheet metal | Not recorded | None |
| SKF 24030 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24030 CC/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 24030 CCK30/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24030 CCK30/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 24030 CCK30/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 24030 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 24030-BE-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24030-BE-XL-2VSR | 2VSR — Seals on both sides, high temperature | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24030-BE-XL-2VSR-C3 | 2VSR — Seals on both sides, high temperature | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24030-BE-XL-2VSR-H40 | 2VSR — Seals on both sides, high temperature | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24030-BE-XL-2VSR-H40-C4 | 2VSR — Seals on both sides, high temperature | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24030-BE-XL>A | Not recorded | Not recorded | Not recorded | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24030-BE-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24030-BE-XL-C3>A | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24030-BE-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24030-BE-XL-H40-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24030-BE-XL-K30 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24030-BE-XL-K30>A | Not recorded | Not recorded | Not recorded | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24030-BE-XL-K30-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24030-BE-XL-K30-C3>A | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24030-BE-XL-K30-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24030-CP-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24030-CP-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 24030EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24030EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24030EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24030EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24030EJW33W89C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24030EJW841 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24030EJW841C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24030EJW841C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24030EMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24030KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24030KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24030KEMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24030KEMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 24030CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 24030CAMK30E4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 24030CE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 24030CK30E4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 24030RH | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24030RZK30+AH24030 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
24030-2CS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →SKF24030-2CS5W/C3GEM9
Spherical roller bearing with integral sealing
View full technical record →FAG24030-BE-XL
Spherical Roller Bearing
View full technical record →FAG24030-BE-XL-2VSR
Spherical Roller Bearing
View full technical record →FAG24030-BE-XL-2VSR-C3
Spherical Roller Bearing
View full technical record →FAG24030-BE-XL-2VSR-H40
Spherical Roller Bearing
View full technical record →FAG24030-BE-XL-2VSR-H40-C4
Spherical Roller Bearing
View full technical record →FAG24030-BE-XL>A
Spherical Roller Bearing
View full technical record →FAG24030-BE-XL-C3
Spherical Roller Bearing
View full technical record →FAG24030-BE-XL-C3>A
Spherical Roller Bearing
View full technical record →FAG24030-BE-XL-C4
Spherical Roller Bearing
View full technical record →FAG24030-BE-XL-H40-C3
Spherical Roller Bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.