Find · understand · compare
24028 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 24028. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
24028 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 44 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF24028-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 601 kN | 900 kN | — | 850 rpm | 8.19 kg8190 g |
| SKF24028-2CS5W/C4GEM9Spherical roller bearing with integral sealing |
| 601 kN | 900 kN | — | 170 rpm | 8.19 kg8190 g |
| SKF24028-2CS5W/GEM9Spherical roller bearing with integral sealing |
| 601 kN | 900 kN | — | 170 rpm | 8.19 kg8190 g |
| SKF24028/C3W33VA9B1Spherical roller bearing for continuous casters, with relubrication features |
| — | 900 kN | — | 20 rpm | 8.55 kg8550 g |
| SKF24028/C4W33VA9B1Spherical roller bearing for continuous casters, with relubrication features |
| — | 900 kN | — | 20 rpm | 8.1 kg8100 g |
| SKF24028 CC/C3W33Spherical roller bearing with relubrication features |
| 600 kN | 900 kN | 2000 rpm | 2800 rpm | 8.17 kg8170 g |
| SKF24028 CC/C4W33Spherical roller bearing with relubrication features |
| 600 kN | 900 kN | 2000 rpm | 2800 rpm | 8.17 kg8170 g |
| SKF24028 CCK30/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 600 kN | 900 kN | 2000 rpm | 2800 rpm | 8.06 kg8060 g |
| SKF24028 CCK30/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 600 kN | 900 kN | 2000 rpm | 2800 rpm | 8.07 kg8070 g |
| SKF24028 CCK30/W33Spherical roller bearing with tapered bore and relubrication features |
| 600 kN | 900 kN | 2000 rpm | 2800 rpm | 8.07 kg8070 g |
| SKF24028 CC/W33Spherical roller bearing with relubrication features |
| 600 kN | 900 kN | 2000 rpm | 2800 rpm | 8.19 kg8190 g |
| FAG24028-BE-XLSpherical Roller Bearing |
| 590 kN | 930 kN | 1950 rpm | 2950 rpm | 8.273 kg8273 g |
| FAG24028-BE-XL-2VSRSpherical Roller Bearing |
| 590 kN | 930 kN | — | 740 rpm | 8.274 kg8274 g |
| FAG24028-BE-XL-2VSR-C4Spherical Roller Bearing |
| 590 kN | 930 kN | — | 740 rpm | 8.2 kg8200 g |
| FAG24028-BE-XL-2VSR-H40-C3Spherical Roller Bearing |
| 590 kN | 930 kN | — | 740 rpm | 8.766 kg8766 g |
| FAG24028-BE-XL-2VSR-H40-C4Spherical Roller Bearing |
| 590 kN | 930 kN | — | 740 rpm | 8.766 kg8766 g |
| FAG24028-BE-XL>ASpherical Roller Bearing |
| 590 kN | 930 kN | 1950 rpm | 2950 rpm | 8.4 kg8400 g |
| FAG24028-BE-XL-C3Spherical Roller Bearing |
| 590 kN | 930 kN | 1950 rpm | 2950 rpm | 8.273 kg8273 g |
| FAG24028-BE-XL-C3>ASpherical Roller Bearing |
| 590 kN | 930 kN | 1950 rpm | 2950 rpm | 8.4 kg8400 g |
| FAG24028-BE-XL-C4Spherical Roller Bearing |
| 590 kN | 930 kN | 1950 rpm | 2950 rpm | 8.273 kg8273 g |
| FAG24028-BE-XL-H40-C3Spherical Roller Bearing |
| 590 kN | 930 kN | 1950 rpm | 2950 rpm | 8.4 kg8400 g |
| FAG24028-BE-XL-K30Spherical Roller Bearing |
| 590 kN | 930 kN | 1950 rpm | 2950 rpm | 8.155 kg8155 g |
| FAG24028-BE-XL-K30-C3Spherical Roller Bearing |
| 590 kN | 930 kN | 1950 rpm | 2950 rpm | 8.138 kg8138 g |
| FAG24028-BE-XL-K30-C4Spherical Roller Bearing |
| 590 kN | 930 kN | 1950 rpm | 2950 rpm | 8.16 kg8160 g |
| FAG24028-CP-C3Spherical Roller Bearing |
| — | 930 kN | — | 25 rpm | 8.24 kg8240 g |
| FAG24028-CP-C4Spherical Roller Bearing |
| — | 930 kN | — | 25 rpm | 8.24 kg8240 g |
| TIMKEN24028EJW33Spherical roller bearing |
| 702 kN | 1060 kN | — | — | 8.1 kg8100 g |
| TIMKEN24028EJW33C2Spherical roller bearing |
| 702 kN | 1060 kN | — | — | 8.1 kg8100 g |
| TIMKEN24028EJW33C3Spherical roller bearing |
| 702 kN | 1060 kN | — | — | 8.1 kg8100 g |
| TIMKEN24028EJW33C4Spherical roller bearing |
| 702 kN | 1060 kN | — | — | 8.1 kg8100 g |
| TIMKEN24028EJW841Spherical roller bearing |
| 702 kN | 1060 kN | — | — | 8.22 kg8220 g |
| TIMKEN24028EJW841C3Spherical roller bearing |
| 702 kN | 1060 kN | — | — | 8.22 kg8220 g |
| TIMKEN24028EJW841C4Spherical roller bearing |
| 702 kN | 1060 kN | — | — | 8.22 kg8220 g |
| TIMKEN24028EMW33C4Spherical roller bearing |
| 683 kN | 1020 kN | — | — | 8.17 kg8170 g |
| TIMKEN24028EMW841C3Spherical roller bearing |
| 683 kN | 1020 kN | — | — | 8.28 kg8280 g |
| TIMKEN24028KEJW33Spherical roller bearing |
| 702 kN | 1060 kN | — | — | 7.97 kg7970 g |
| TIMKEN24028KEJW33C3Spherical roller bearing |
| 702 kN | 1060 kN | — | — | 7.97 kg7970 g |
| TIMKEN24028KEJW33C4Spherical roller bearing |
| 702 kN | 1060 kN | — | — | 7.97 kg7970 g |
| NSK24028CAME4Spherical roller bearing |
| 635 kN | 905 kN | — | — | 8.37 kg8370 g |
| NSK24028CAMK30E4Spherical roller bearing |
| 635 kN | 905 kN | — | — | — |
| NSK24028CE4Spherical roller bearing |
| 655 kN | 945 kN | — | — | 8.37 kg8370 g |
| NSK24028CK30E4Spherical roller bearing |
| 655 kN | 945 kN | — | — | — |
| KOYO24028RHSpherical roller bearing |
| 640 kN | 957 kN | — | 2100 rpmLimiting Speeds(Grease Lub.): 2100 min-1Limiting Speeds(Oil Lub.): 2800 min-1 | 8.49 kg8490 g |
| KOYO24028RZK30+AH24028Spherical roller bearing |
| 640 kN | 957 kN | — | 2100 rpmLimiting Speeds(Grease Lub.): 2100 min-1Limiting Speeds(Oil Lub.): 2800 min-1 | 9.26 kg9260 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 24028-2CS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 24028-2CS5W/C4GEM9 | Seal on both sides | Not recorded | C4 | Sheet metal | Not recorded | Grease |
| SKF 24028-2CS5W/GEM9 | Seal on both sides | Not recorded | CN | Sheet metal | Not recorded | Grease |
| SKF 24028/C3W33VA9B1 | Without | Normal | C3 | Sheet metal | Not recorded | None |
| SKF 24028/C4W33VA9B1 | Without | Normal | C4 | Sheet metal | Not recorded | None |
| SKF 24028 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24028 CC/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 24028 CCK30/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24028 CCK30/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 24028 CCK30/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 24028 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 24028-BE-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24028-BE-XL-2VSR | 2VSR — Seals on both sides, high temperature | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24028-BE-XL-2VSR-C4 | 2VSR — Seals on both sides, high temperature | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24028-BE-XL-2VSR-H40-C3 | 2VSR — Seals on both sides, high temperature | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24028-BE-XL-2VSR-H40-C4 | 2VSR — Seals on both sides, high temperature | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24028-BE-XL>A | Not recorded | Not recorded | Not recorded | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24028-BE-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24028-BE-XL-C3>A | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24028-BE-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24028-BE-XL-H40-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24028-BE-XL-K30 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24028-BE-XL-K30-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24028-BE-XL-K30-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24028-CP-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24028-CP-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 24028EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24028EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24028EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24028EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24028EJW841 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24028EJW841C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24028EJW841C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24028EMW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24028EMW841C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24028KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24028KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24028KEJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 24028CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 24028CAMK30E4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 24028CE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 24028CK30E4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 24028RH | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24028RZK30+AH24028 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
24028-2CS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →SKF24028-2CS5W/C4GEM9
Spherical roller bearing with integral sealing
View full technical record →SKF24028-2CS5W/GEM9
Spherical roller bearing with integral sealing
View full technical record →FAG24028-BE-XL
Spherical Roller Bearing
View full technical record →FAG24028-BE-XL-2VSR
Spherical Roller Bearing
View full technical record →FAG24028-BE-XL-2VSR-C4
Spherical Roller Bearing
View full technical record →FAG24028-BE-XL-2VSR-H40-C3
Spherical Roller Bearing
View full technical record →FAG24028-BE-XL-2VSR-H40-C4
Spherical Roller Bearing
View full technical record →FAG24028-BE-XL>A
Spherical Roller Bearing
View full technical record →FAG24028-BE-XL-C3
Spherical Roller Bearing
View full technical record →FAG24028-BE-XL-C3>A
Spherical Roller Bearing
View full technical record →FAG24028-BE-XL-C4
Spherical Roller Bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.