Find · understand · compare
24026 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 24026. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
24026 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 45 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF24026-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 570 kN | 830 kN | — | 950 rpm | 7.8 kg7800 g |
| SKF24026-2CS5W/C4GEM9Spherical roller bearing with integral sealing |
| 570 kN | 830 kN | — | 180 rpm | 7.8 kg7800 g |
| SKF24026/C3W33VA9B1Spherical roller bearing for continuous casters, with relubrication features |
| — | 815 kN | — | 20 rpm | 8.05 kg8050 g |
| SKF24026/C4W33VA9B1Spherical roller bearing for continuous casters, with relubrication features |
| — | 815 kN | — | 20 rpm | 8.05 kg8050 g |
| SKF24026 CC/C3W33Spherical roller bearing with relubrication features |
| 569 kN | 815 kN | 2000 rpm | 3000 rpm | 7.67 kg7670 g |
| SKF24026 CC/C4W33Spherical roller bearing with relubrication features |
| 569 kN | 815 kN | 2000 rpm | 3000 rpm | 7.67 kg7670 g |
| SKF24026 CCK30/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 569 kN | 815 kN | 2000 rpm | 3000 rpm | 7.57 kg7570 g |
| SKF24026 CCK30/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 569 kN | 815 kN | 2000 rpm | 3000 rpm | 7.57 kg7570 g |
| SKF24026 CCK30/W33Spherical roller bearing with tapered bore and relubrication features |
| 569 kN | 815 kN | 2000 rpm | 3000 rpm | 7.57 kg7570 g |
| SKF24026 CC/W33Spherical roller bearing with relubrication features |
| 569 kN | 815 kN | 2000 rpm | 3000 rpm | 7.67 kg7670 g |
| FAG24026-BE-XLSpherical Roller Bearing |
| 570 kN | 860 kN | 2130 rpm | 3100 rpm | 7.769 kg7769 g |
| FAG24026-BE-XL-2VSRSpherical Roller Bearing |
| 570 kN | 860 kN | — | 780 rpm | 7.789 kg7789 g |
| FAG24026-BE-XL-2VSR-C4Spherical Roller Bearing |
| 570 kN | 860 kN | — | 780 rpm | 7.8 kg7800 g |
| FAG24026-BE-XL-2VSR-H40-C3Spherical Roller Bearing |
| 570 kN | 860 kN | — | 780 rpm | 7.83 kg7830 g |
| FAG24026-BE-XL-2VSR-H40-C4Spherical Roller Bearing |
| 570 kN | 860 kN | — | 780 rpm | 7.807 kg7807 g |
| FAG24026-BE-XL-C3Spherical Roller Bearing |
| 570 kN | 860 kN | 2130 rpm | 3100 rpm | 7.769 kg7769 g |
| FAG24026-BE-XL-C4Spherical Roller Bearing |
| 570 kN | 860 kN | 2130 rpm | 3100 rpm | 7.769 kg7769 g |
| FAG24026-BE-XL-H40AC-C4Spherical Roller Bearing |
| 570 kN | 860 kN | 2130 rpm | 3100 rpm | 7.733 kg7733 g |
| FAG24026-BE-XL-K30Spherical Roller Bearing |
| 570 kN | 860 kN | 2130 rpm | 3100 rpm | 7.65 kg7650 g |
| FAG24026-BE-XL-K30-C3Spherical Roller Bearing |
| 570 kN | 860 kN | 2130 rpm | 3100 rpm | 7.644 kg7644 g |
| FAG24026-BE-XL-K30-C4Spherical Roller Bearing |
| 570 kN | 860 kN | 2130 rpm | 3100 rpm | 7.632 kg7632 g |
| FAG24026-CP-C3Spherical Roller Bearing |
| — | 860 kN | — | 25 rpm | 7.768 kg7768 g |
| FAG24026-CP-C4Spherical Roller Bearing |
| — | 860 kN | — | 25 rpm | 7.77 kg7770 g |
| TIMKEN24026EJW33Spherical roller bearing |
| 664 kN | 966 kN | — | — | 7.65 kg7650 g |
| TIMKEN24026EJW33C2Spherical roller bearing |
| 664 kN | 966 kN | — | — | 7.65 kg7650 g |
| TIMKEN24026EJW33C3Spherical roller bearing |
| 664 kN | 966 kN | — | — | 7.65 kg7650 g |
| TIMKEN24026EJW33C4Spherical roller bearing |
| 664 kN | 966 kN | — | — | 7.65 kg7650 g |
| TIMKEN24026EJW33W89Spherical roller bearing |
| 664 kN | 966 kN | — | — | 7.64 kg7640 g |
| TIMKEN24026EJW33W89C3Spherical roller bearing |
| 664 kN | 966 kN | — | — | 7.64 kg7640 g |
| TIMKEN24026EJW33W89C4Spherical roller bearing |
| 664 kN | 966 kN | — | — | 7.64 kg7640 g |
| TIMKEN24026EJW841Spherical roller bearing |
| 664 kN | 966 kN | — | — | 7.71 kg7710 g |
| TIMKEN24026EJW841C3Spherical roller bearing |
| 664 kN | 966 kN | — | — | 7.71 kg7710 g |
| TIMKEN24026EJW841C4Spherical roller bearing |
| 664 kN | 966 kN | — | — | 7.71 kg7710 g |
| TIMKEN24026EMW33C3Spherical roller bearing |
| 645 kN | 926 kN | — | — | 7.7 kg7700 g |
| TIMKEN24026EMW33C4Spherical roller bearing |
| 645 kN | 926 kN | — | — | 7.7 kg7700 g |
| TIMKEN24026EMW841C3Spherical roller bearing |
| 645 kN | 926 kN | — | — | 7.76 kg7760 g |
| TIMKEN24026KEJW33Spherical roller bearing |
| 664 kN | 966 kN | — | — | 7.52 kg7520 g |
| TIMKEN24026KEJW33C3Spherical roller bearing |
| 664 kN | 966 kN | — | — | 7.52 kg7520 g |
| TIMKEN24026KEJW33C4Spherical roller bearing |
| 664 kN | 966 kN | — | — | 7.52 kg7520 g |
| NSK24026CAME4Spherical roller bearing |
| 620 kN | 865 kN | — | — | 7.84 kg7840 g |
| NSK24026CAMK30E4Spherical roller bearing |
| 620 kN | 865 kN | — | — | — |
| NSK24026CE4Spherical roller bearing |
| 620 kN | 865 kN | — | — | 7.84 kg7840 g |
| NSK24026CK30E4Spherical roller bearing |
| 620 kN | 865 kN | — | — | — |
| KOYO24026RHSpherical roller bearing |
| 625 kN | 914 kN | — | 2200 rpmLimiting Speeds(Grease Lub.): 2200 min-1Limiting Speeds(Oil Lub.): 2900 min-1 | 8.03 kg8030 g |
| KOYO24026RZK30+AH24026Spherical roller bearing |
| 625 kN | 914 kN | — | 2200 rpmLimiting Speeds(Grease Lub.): 2200 min-1Limiting Speeds(Oil Lub.): 2900 min-1 | 8.74 kg8740 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 24026-2CS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 24026-2CS5W/C4GEM9 | Seal on both sides | Not recorded | C4 | Sheet metal | Not recorded | Grease |
| SKF 24026/C3W33VA9B1 | Without | Normal | C3 | Sheet metal | Not recorded | None |
| SKF 24026/C4W33VA9B1 | Without | Normal | C4 | Sheet metal | Not recorded | None |
| SKF 24026 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24026 CC/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 24026 CCK30/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24026 CCK30/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 24026 CCK30/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 24026 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 24026-BE-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24026-BE-XL-2VSR | 2VSR — Seals on both sides, high temperature | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24026-BE-XL-2VSR-C4 | 2VSR — Seals on both sides, high temperature | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24026-BE-XL-2VSR-H40-C3 | 2VSR — Seals on both sides, high temperature | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24026-BE-XL-2VSR-H40-C4 | 2VSR — Seals on both sides, high temperature | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24026-BE-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24026-BE-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24026-BE-XL-H40AC-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24026-BE-XL-K30 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24026-BE-XL-K30-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24026-BE-XL-K30-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24026-CP-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24026-CP-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 24026EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24026EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24026EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24026EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24026EJW33W89 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24026EJW33W89C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24026EJW33W89C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24026EJW841 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24026EJW841C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24026EJW841C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24026EMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24026EMW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24026EMW841C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 24026KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24026KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24026KEJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 24026CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 24026CAMK30E4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 24026CE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 24026CK30E4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 24026RH | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 24026RZK30+AH24026 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
24026-2CS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →SKF24026-2CS5W/C4GEM9
Spherical roller bearing with integral sealing
View full technical record →FAG24026-BE-XL
Spherical Roller Bearing
View full technical record →FAG24026-BE-XL-2VSR
Spherical Roller Bearing
View full technical record →FAG24026-BE-XL-2VSR-C4
Spherical Roller Bearing
View full technical record →FAG24026-BE-XL-2VSR-H40-C3
Spherical Roller Bearing
View full technical record →FAG24026-BE-XL-2VSR-H40-C4
Spherical Roller Bearing
View full technical record →FAG24026-BE-XL-C3
Spherical Roller Bearing
View full technical record →FAG24026-BE-XL-C4
Spherical Roller Bearing
View full technical record →FAG24026-BE-XL-H40AC-C4
Spherical Roller Bearing
View full technical record →FAG24026-BE-XL-K30
Spherical Roller Bearing
View full technical record →FAG24026-BE-XL-K30-C3
Spherical Roller Bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.