24020 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 24020. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
24020 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 16 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF24020-2RS5/C3GEM9Spherical roller bearing with integral sealing and relubrication features |
| 296 kN | 415 kN | — | — | 2.96 kg2960 g |
| SKF24020-2RS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 296 kN | 415 kN | — | 1700 rpm | 2.96 kg2960 g |
| SKF24020-2RS5/VT143BSpherical roller bearing with integral sealing and relubrication features |
| 296 kN | 415 kN | — | — | 2.96 kg2960 g |
| SKF24020-2RS5W/GEM9Spherical roller bearing with integral sealing |
| 296 kN | 415 kN | — | — | 2.99 kg2990 g |
| SKF24020 CC/C3W33Spherical roller bearing with relubrication features |
| 296 kN | 415 kN | 2800 rpm | 4000 rpm | 2.94 kg2940 g |
| SKF24020 CC/W33Spherical roller bearing with relubrication features |
| 296 kN | 415 kN | 2800 rpm | 4000 rpm | 2.94 kg2940 g |
| FAG24020-BE-XLSpherical Roller Bearing |
| 320 kN | 480 kN | 2750 rpm | 4100 rpm | 3.054 kg3054 g |
| FAG24020-BE-XL-C3Spherical Roller Bearing |
| 320 kN | 480 kN | 2750 rpm | 4100 rpm | 3.047 kg3047 g |
| FAG24020-BE-XL-C4Spherical Roller Bearing |
| 320 kN | 480 kN | 2750 rpm | 4100 rpm | 3.046 kg3046 g |
| TIMKEN24020EJW33Spherical roller bearing |
| 352 kN | 506 kN | — | — | 2.97 kg2970 g |
| TIMKEN24020EJW33C2Spherical roller bearing |
| 352 kN | 506 kN | — | — | 2.97 kg2970 g |
| TIMKEN24020EJW33C3Spherical roller bearing |
| 352 kN | 506 kN | — | — | 2.97 kg2970 g |
| TIMKEN24020EJW33C4Spherical roller bearing |
| 352 kN | 506 kN | — | — | 2.97 kg2970 g |
| TIMKEN24020EJW841C3Spherical roller bearing |
| 352 kN | 506 kN | — | — | 3.01 kg3010 g |
| NSK24020CE4Spherical roller bearing |
| 276 kN | 470 kN | — | — | 3.08 kg3080 g |
| NSK24020CK30E4Spherical roller bearing |
| 276 kN | 470 kN | — | — | — |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 24020-2RS5/C3GEM9 | Seal on both sides | Not recorded | C3 | Sheet metal | Not recorded | Grease |
| SKF 24020-2RS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 24020-2RS5/VT143B | Seal on both sides | Not recorded | CN | Sheet metal | Not recorded | Grease |
| SKF 24020-2RS5W/GEM9 | Seal on both sides | Not recorded | CN | Sheet metal | Not recorded | Grease |
| SKF 24020 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 24020 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 24020-BE-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24020-BE-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 24020-BE-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 24020EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24020EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24020EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24020EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 24020EJW841C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 24020CE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 24020CK30E4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
24020-2RS5/C3GEM9
Spherical roller bearing with integral sealing and relubrication features
View full technical record →SKF24020-2RS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →SKF24020-2RS5/VT143B
Spherical roller bearing with integral sealing and relubrication features
View full technical record →SKF24020-2RS5W/GEM9
Spherical roller bearing with integral sealing
View full technical record →FAG24020-BE-XL
Spherical Roller Bearing
View full technical record →FAG24020-BE-XL-C3
Spherical Roller Bearing
View full technical record →FAG24020-BE-XL-C4
Spherical Roller Bearing
View full technical record →SKF24020 CC/C3W33
Spherical roller bearing with relubrication features
View full technical record →SKF24020 CC/W33
Spherical roller bearing with relubrication features
View full technical record →NSK24020CE4
Spherical roller bearing
View full technical record →NSK24020CK30E4
Spherical roller bearing
View full technical record →TIMKEN24020EJW33
Spherical roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.