Find · understand · compare
23268 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 23268. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
23268 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 30 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF23268 CA/C3W33Spherical roller bearing with relubrication features |
| 5362 kN | 7800 kN | 560 rpm | 800 rpm | 295 kg295000 g |
| SKF23268 CAK/C083W507Spherical roller bearing with tapered bore and relubrication features |
| 5362 kN | 7800 kN | 560 rpm | 800 rpm | 287 kg287000 g |
| SKF23268 CAK/C084W507Spherical roller bearing with tapered bore and relubrication features |
| 5362 kN | 7800 kN | 560 rpm | 800 rpm | 286 kg286000 g |
| SKF23268 CAK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 5362 kN | 7800 kN | 560 rpm | 800 rpm | 286 kg286000 g |
| SKF23268 CAK/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 5362 kN | 7800 kN | 560 rpm | 800 rpm | 286 kg286000 g |
| SKF23268 CAK/W33Spherical roller bearing with tapered bore and relubrication features |
| 5362 kN | 7800 kN | 560 rpm | 800 rpm | 286 kg286000 g |
| SKF23268 CA/W33Spherical roller bearing with relubrication features |
| 5362 kN | 7800 kN | 560 rpm | 800 rpm | 295 kg295000 g |
| FAG23268-BEA-XL-K-MB1Spherical Roller Bearing |
| 5300 kN | 7900 kN | 475 rpm | 1000 rpm | 286 kg286000 g |
| FAG23268-BEA-XL-K-MB1-C3Spherical Roller Bearing |
| 5300 kN | 7900 kN | 475 rpm | 1000 rpm | 286 kg286000 g |
| FAG23268-BEA-XL-MB1Spherical Roller Bearing |
| 5300 kN | 7900 kN | 475 rpm | 1000 rpm | 295 kg295000 g |
| FAG23268-BEA-XL-MB1-C2Spherical Roller Bearing |
| 5300 kN | 7900 kN | 475 rpm | 1000 rpm | 294 kg294000 g |
| FAG23268-BEA-XL-MB1-C3Spherical Roller Bearing |
| 5300 kN | 7900 kN | 475 rpm | 1000 rpm | 294.5 kg294500 g |
| TIMKEN23268KYMBW33W45ASpherical roller bearing |
| 5160 kN | 8200 kN | — | — | 292.44 kg292440 g |
| TIMKEN23268KYMBW507C08Spherical roller bearing |
| 5160 kN | 8200 kN | — | — | 292.29 kg292290 g |
| TIMKEN23268KYMBW507C08C3Spherical roller bearing |
| 5160 kN | 8200 kN | — | — | 292.29 kg292290 g |
| TIMKEN23268KYMBW906ASpherical roller bearing |
| 5160 kN | 8200 kN | — | — | 292.43 kg292430 g |
| TIMKEN23268KYMBW906AC3Spherical roller bearing |
| 5160 kN | 8200 kN | — | — | 292.43 kg292430 g |
| TIMKEN23268YMBW33W45ASpherical roller bearing |
| 5160 kN | 8200 kN | — | — | 301.45 kg301450 g |
| TIMKEN23268YMBW33W45AC3Spherical roller bearing |
| 5160 kN | 8200 kN | — | — | 301.45 kg301450 g |
| TIMKEN23268YMBW33W45AW40IC3Spherical roller bearing |
| 5160 kN | 8200 kN | — | — | 301.3 kg301300 g |
| TIMKEN23268YMBW37W45BSpherical roller bearing |
| 5160 kN | 8200 kN | — | — | 302.82 kg302820 g |
| TIMKEN23268YMBW915C3Spherical roller bearing |
| 5160 kN | 8200 kN | — | — | 301.41 kg301410 g |
| NSK23268CAME4Spherical roller bearing |
| 4400 kN | 7800 kN | — | — | 295 kg295000 g |
| NSK23268CAMKE4Spherical roller bearing |
| 4400 kN | 7800 kN | — | — | — |
| KOYO23268RSpherical roller bearing |
| 5130 kN | 7560 kN | — | 450 rpmLimiting Speeds(Grease Lub.): 450 min-1Limiting Speeds(Oil Lub.): 600 min-1 | 306 kg306000 g |
| KOYO23268RHASpherical roller bearing |
| 5690 kN | 8030 kN | — | 440 rpmLimiting Speeds(Grease Lub.): 440 min-1Limiting Speeds(Oil Lub.): 590 min-1 | 290 kg290000 g |
| KOYO23268RHAK+AH3268Spherical roller bearing |
| 5690 kN | 8030 kN | — | 440 rpmLimiting Speeds(Grease Lub.): 440 min-1Limiting Speeds(Oil Lub.): 590 min-1 | 317 kg317000 g |
| KOYO23268RHAK+H3268Spherical roller bearing |
| 5690 kN | 8030 kN | — | 440 rpmLimiting Speeds(Grease Lub.): 440 min-1Limiting Speeds(Oil Lub.): 590 min-1 | 339 kg339000 g |
| KOYO23268RK+AH3268Spherical roller bearing |
| 5130 kN | 7560 kN | — | 450 rpmLimiting Speeds(Grease Lub.): 450 min-1Limiting Speeds(Oil Lub.): 600 min-1 | 342 kg342000 g |
| KOYO23268RK+H3268Spherical roller bearing |
| 5130 kN | 7560 kN | — | 450 rpmLimiting Speeds(Grease Lub.): 450 min-1Limiting Speeds(Oil Lub.): 600 min-1 | 355 kg355000 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 23268 CA/C3W33 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23268 CAK/C083W507 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23268 CAK/C084W507 | Without | Not recorded | C4 | Machined brass | Not recorded | None |
| SKF 23268 CAK/C3W33 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23268 CAK/C4W33 | Without | Not recorded | C4 | Machined brass | Not recorded | None |
| SKF 23268 CAK/W33 | Without | Normal | CN | Machined brass | Not recorded | None |
| SKF 23268 CA/W33 | Without | Normal | CN | Machined brass | Not recorded | None |
| FAG 23268-BEA-XL-K-MB1 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23268-BEA-XL-K-MB1-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23268-BEA-XL-MB1 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23268-BEA-XL-MB1-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23268-BEA-XL-MB1-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| TIMKEN 23268KYMBW33W45A | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23268KYMBW507C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23268KYMBW507C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23268KYMBW906A | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23268KYMBW906AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23268YMBW33W45A | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23268YMBW33W45AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23268YMBW33W45AW40IC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23268YMBW37W45B | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23268YMBW915C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 23268CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23268CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| KOYO 23268R | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23268RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23268RHAK+AH3268 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23268RHAK+H3268 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23268RK+AH3268 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23268RK+H3268 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
FAG
23268-BEA-XL-K-MB1
Spherical Roller Bearing
View full technical record →FAG23268-BEA-XL-K-MB1-C3
Spherical Roller Bearing
View full technical record →FAG23268-BEA-XL-MB1
Spherical Roller Bearing
View full technical record →FAG23268-BEA-XL-MB1-C2
Spherical Roller Bearing
View full technical record →FAG23268-BEA-XL-MB1-C3
Spherical Roller Bearing
View full technical record →SKF23268 CA/C3W33
Spherical roller bearing with relubrication features
View full technical record →SKF23268 CAK/C083W507
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23268 CAK/C084W507
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23268 CAK/C3W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23268 CAK/C4W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23268 CAK/W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →NSK23268CAME4
Spherical roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.