Find · understand · compare
23256 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 23256. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
23256 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 41 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF23256 CAC/C083W507Spherical roller bearing with relubrication features |
| 3425 kN | 4900 kN | 800 rpm | 1100 rpm | 150 kg150000 g |
| SKF23256 CAC/C084W507Spherical roller bearing with relubrication features |
| 3425 kN | 4900 kN | 800 rpm | 1100 rpm | 150 kg150000 g |
| SKF23256 CAC/C08W507Spherical roller bearing with relubrication features |
| 3425 kN | 4900 kN | 800 rpm | 1100 rpm | 150 kg150000 g |
| SKF23256 CAC/C3W33Spherical roller bearing with relubrication features |
| 3425 kN | 4900 kN | 800 rpm | 1100 rpm | 148 kg148000 g |
| SKF23256 CACK/C083W507Spherical roller bearing with tapered bore and relubrication features |
| 3425 kN | 4900 kN | 800 rpm | 1100 rpm | 148 kg148000 g |
| SKF23256 CACK/C08W507Spherical roller bearing with tapered bore and relubrication features |
| 3425 kN | 4900 kN | 800 rpm | 1100 rpm | 143 kg143000 g |
| SKF23256 CACK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 3425 kN | 4900 kN | 800 rpm | 1100 rpm | 143 kg143000 g |
| SKF23256 CACK/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 3425 kN | 4900 kN | 800 rpm | 1100 rpm | 143 kg143000 g |
| SKF23256 CACK/W33Spherical roller bearing with tapered bore and relubrication features |
| 3425 kN | 4900 kN | 800 rpm | 1100 rpm | 143 kg143000 g |
| SKF23256 CAC/W33Spherical roller bearing with relubrication features |
| 3425 kN | 4900 kN | 800 rpm | 1100 rpm | 148 kg148000 g |
| SKF23256 CC/C3W33Spherical roller bearing with relubrication features |
| 3425 kN | 4900 kN | 800 rpm | 1100 rpm | 145 kg145000 g |
| SKF23256 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 3425 kN | 4900 kN | 800 rpm | 1100 rpm | 141 kg141000 g |
| SKF23256 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 3425 kN | 4900 kN | 800 rpm | 1100 rpm | 141 kg141000 g |
| SKF23256 CC/W33Spherical roller bearing with relubrication features |
| 3425 kN | 4900 kN | 800 rpm | 1100 rpm | 145 kg145000 g |
| FAG23256-BEA-XL-K-MB1Spherical Roller Bearing |
| 3550 kN | 5200 kN | 630 rpm | 1280 rpm | 142.9 kg142900 g |
| FAG23256-BEA-XL-K-MB1-C2Spherical Roller Bearing |
| 3550 kN | 5200 kN | 630 rpm | 1280 rpm | 142.93 kg142930 g |
| FAG23256-BEA-XL-K-MB1-C3Spherical Roller Bearing |
| 3550 kN | 5200 kN | 630 rpm | 1280 rpm | 142.855 kg142855 g |
| FAG23256-BEA-XL-K-MB1-C4Spherical Roller Bearing |
| 3550 kN | 5200 kN | 630 rpm | 1280 rpm | 142.72 kg142720 g |
| FAG23256-BEA-XL-K-MB1-H40Spherical Roller Bearing |
| 3550 kN | 5200 kN | 630 rpm | 1280 rpm | 144.385 kg144385 g |
| FAG23256-BEA-XL-MB1Spherical Roller Bearing |
| 3550 kN | 5200 kN | 630 rpm | 1280 rpm | 147.37 kg147370 g |
| FAG23256-BEA-XL-MB1-C3Spherical Roller Bearing |
| 3550 kN | 5200 kN | 630 rpm | 1280 rpm | 147.28 kg147280 g |
| FAG23256-BEA-XL-MB1-C4Spherical Roller Bearing |
| 3550 kN | 5200 kN | 630 rpm | 1280 rpm | 147.205 kg147205 g |
| TIMKEN23256EJW507C08Spherical roller bearing |
| 3680 kN | 5250 kN | — | — | 145.22 kg145220 g |
| TIMKEN23256EJW507C08C3Spherical roller bearing |
| 3680 kN | 5250 kN | — | — | 145.22 kg145220 g |
| TIMKEN23256EMBW507AC08Spherical roller bearing |
| 3680 kN | 5250 kN | — | — | 149.58 kg149580 g |
| TIMKEN23256EMBW507AC08C3Spherical roller bearing |
| 3680 kN | 5250 kN | — | — | 149.58 kg149580 g |
| TIMKEN23256EMBW507C08Spherical roller bearing |
| 3680 kN | 5250 kN | — | — | 149.61 kg149610 g |
| TIMKEN23256EMBW507C08C2Spherical roller bearing |
| 3680 kN | 5250 kN | — | — | 149.61 kg149610 g |
| TIMKEN23256EMBW507C08C3Spherical roller bearing |
| 3680 kN | 5250 kN | — | — | 149.61 kg149610 g |
| TIMKEN23256KEJW507C08Spherical roller bearing |
| 3680 kN | 5250 kN | — | — | 140.34 kg140340 g |
| TIMKEN23256KEJW507C08C3Spherical roller bearing |
| 3680 kN | 5250 kN | — | — | 140.34 kg140340 g |
| TIMKEN23256KEMBW507C08Spherical roller bearing |
| 3680 kN | 5250 kN | — | — | 145.03 kg145030 g |
| TIMKEN23256KEMBW507C08C3Spherical roller bearing |
| 3680 kN | 5250 kN | — | — | 145.03 kg145030 g |
| NSK23256CAME4Spherical roller bearing |
| 3600 kN | 4900 kN | — | — | 147 kg147000 g |
| NSK23256CAMKE4Spherical roller bearing |
| 3600 kN | 4900 kN | — | — | — |
| KOYO23256RSpherical roller bearing |
| 3370 kN | 4910 kN | — | 610 rpmLimiting Speeds(Grease Lub.): 610 min-1Limiting Speeds(Oil Lub.): 820 min-1 | 153 kg153000 g |
| KOYO23256RHASpherical roller bearing |
| 3770 kN | 5300 kN | — | 600 rpmLimiting Speeds(Grease Lub.): 600 min-1Limiting Speeds(Oil Lub.): 800 min-1 | 145 kg145000 g |
| KOYO23256RHAK+AH2356Spherical roller bearing |
| 3770 kN | 5300 kN | — | 600 rpmLimiting Speeds(Grease Lub.): 600 min-1Limiting Speeds(Oil Lub.): 800 min-1 | 163 kg163000 g |
| KOYO23256RHAK+H2356Spherical roller bearing |
| 3770 kN | 5300 kN | — | 600 rpmLimiting Speeds(Grease Lub.): 600 min-1Limiting Speeds(Oil Lub.): 800 min-1 | 170 kg170000 g |
| KOYO23256RK+AH2356Spherical roller bearing |
| 3370 kN | 4910 kN | — | 610 rpmLimiting Speeds(Grease Lub.): 610 min-1Limiting Speeds(Oil Lub.): 820 min-1 | 175 kg175000 g |
| KOYO23256RK+H2356Spherical roller bearing |
| 3370 kN | 4910 kN | — | 610 rpmLimiting Speeds(Grease Lub.): 610 min-1Limiting Speeds(Oil Lub.): 820 min-1 | 178 kg178000 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 23256 CAC/C083W507 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23256 CAC/C084W507 | Without | Not recorded | C4 | Machined brass | Not recorded | None |
| SKF 23256 CAC/C08W507 | Without | Not recorded | CN | Machined brass | Not recorded | None |
| SKF 23256 CAC/C3W33 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23256 CACK/C083W507 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23256 CACK/C08W507 | Without | Not recorded | CN | Machined brass | Not recorded | None |
| SKF 23256 CACK/C3W33 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23256 CACK/C4W33 | Without | Not recorded | C4 | Machined brass | Not recorded | None |
| SKF 23256 CACK/W33 | Without | Normal | CN | Machined brass | Not recorded | None |
| SKF 23256 CAC/W33 | Without | Normal | CN | Machined brass | Not recorded | None |
| SKF 23256 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23256 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23256 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 23256 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 23256-BEA-XL-K-MB1 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23256-BEA-XL-K-MB1-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23256-BEA-XL-K-MB1-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23256-BEA-XL-K-MB1-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23256-BEA-XL-K-MB1-H40 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23256-BEA-XL-MB1 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23256-BEA-XL-MB1-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23256-BEA-XL-MB1-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | MB1 — Solid brass cage | Not recorded | Not recorded |
| TIMKEN 23256EJW507C08 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23256EJW507C08C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23256EMBW507AC08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23256EMBW507AC08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23256EMBW507C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23256EMBW507C08C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23256EMBW507C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23256KEJW507C08 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23256KEJW507C08C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23256KEMBW507C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23256KEMBW507C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 23256CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23256CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| KOYO 23256R | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23256RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23256RHAK+AH2356 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23256RHAK+H2356 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23256RK+AH2356 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23256RK+H2356 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
232/560 CAK/C08W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF232/560 CAK/C3W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF232/560 CAK/W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →NSK232/560CAME4
Spherical roller bearing
View full technical record →NSK232/560CAMKE4
Spherical roller bearing
View full technical record →FAG232/560-K-MB
Spherical Roller Bearing
View full technical record →TIMKEN232/560KYMBW20W45AC3
Spherical roller bearing
View full technical record →FAG232/560-MB
Spherical Roller Bearing
View full technical record →FAG23256-BEA-XL-K-MB1
Spherical Roller Bearing
View full technical record →FAG23256-BEA-XL-K-MB1-C2
Spherical Roller Bearing
View full technical record →FAG23256-BEA-XL-K-MB1-C3
Spherical Roller Bearing
View full technical record →FAG23256-BEA-XL-K-MB1-C4
Spherical Roller Bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.