Find · understand · compare
23252 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 23252. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
23252 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 48 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF23252 CAC/C3W33Spherical roller bearing with relubrication features |
| 3395 kN | 4750 kN | 850 rpm | 1200 rpm | 140 kg140000 g |
| SKF23252 CAC/C3W502Spherical roller bearing with relubrication features |
| 3395 kN | 4750 kN | 850 rpm | 1200 rpm | 140 kg140000 g |
| SKF23252 CAC/C3W507Spherical roller bearing with relubrication features |
| 3395 kN | 4750 kN | 850 rpm | 1200 rpm | 140 kg140000 g |
| SKF23252 CACK/C083W507Spherical roller bearing with tapered bore and relubrication features |
| 3395 kN | 4750 kN | 850 rpm | 1200 rpm | 135 kg135000 g |
| SKF23252 CACK/C08W507Spherical roller bearing with tapered bore and relubrication features |
| 3395 kN | 4750 kN | 850 rpm | 1200 rpm | 135 kg135000 g |
| SKF23252 CACK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 3395 kN | 4750 kN | 850 rpm | 1200 rpm | 135 kg135000 g |
| SKF23252 CACK/W33Spherical roller bearing with tapered bore and relubrication features |
| 3395 kN | 4750 kN | 850 rpm | 1200 rpm | 135 kg135000 g |
| SKF23252 CAC/W33Spherical roller bearing with relubrication features |
| 3395 kN | 4750 kN | 850 rpm | 1200 rpm | 140 kg140000 g |
| SKF23252 CC/C3W33Spherical roller bearing with relubrication features |
| 3395 kN | 4750 kN | 850 rpm | 1200 rpm | 137 kg137000 g |
| SKF23252 CCK/C08W33Spherical roller bearing with tapered bore and relubrication features |
| 3395 kN | 4750 kN | 850 rpm | 1200 rpm | 133 kg133000 g |
| SKF23252 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 3395 kN | 4750 kN | 850 rpm | 1200 rpm | 133 kg133000 g |
| SKF23252 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 3395 kN | 4750 kN | 850 rpm | 1200 rpm | 133 kg133000 g |
| SKF23252 CC/W33Spherical roller bearing with relubrication features |
| 3395 kN | 4750 kN | 850 rpm | 1200 rpm | 137 kg137000 g |
| FAG23252-BEA-XL-K-MB1Spherical Roller Bearing |
| 3350 kN | 4750 kN | 690 rpm | 1360 rpm | 133.445 kg133445 g |
| FAG23252-BEA-XL-K-MB1-C2Spherical Roller Bearing |
| 3350 kN | 4750 kN | 690 rpm | 1360 rpm | 133.45 kg133450 g |
| FAG23252-BEA-XL-K-MB1-C3Spherical Roller Bearing |
| 3350 kN | 4750 kN | 690 rpm | 1360 rpm | 133.4 kg133400 g |
| FAG23252-BEA-XL-K-MB1-C4Spherical Roller Bearing |
| 3350 kN | 4750 kN | 690 rpm | 1360 rpm | 133.38 kg133380 g |
| FAG23252-BEA-XL-MB1Spherical Roller Bearing |
| 3350 kN | 4750 kN | 690 rpm | 1360 rpm | 137.39 kg137390 g |
| FAG23252-BEA-XL-MB1-C2Spherical Roller Bearing |
| 3350 kN | 4750 kN | 690 rpm | 1360 rpm | 137.1 kg137100 g |
| FAG23252-BEA-XL-MB1-C3Spherical Roller Bearing |
| 3350 kN | 4750 kN | 690 rpm | 1360 rpm | 137.425 kg137425 g |
| FAG23252-BEA-XL-MB1-C4Spherical Roller Bearing |
| 3350 kN | 4750 kN | 690 rpm | 1360 rpm | 137.35 kg137350 g |
| TIMKEN23252EJW507C08Spherical roller bearing |
| 3510 kN | 4850 kN | — | — | 135.83 kg135830 g |
| TIMKEN23252EJW507C08C2Spherical roller bearing |
| 3510 kN | 4850 kN | — | — | 135.83 kg135830 g |
| TIMKEN23252EJW507C08C3Spherical roller bearing |
| 3510 kN | 4850 kN | — | — | 135.83 kg135830 g |
| TIMKEN23252EJW507C08C4Spherical roller bearing |
| 3510 kN | 4850 kN | — | — | 135.83 kg135830 g |
| TIMKEN23252EJW509C08Spherical roller bearing |
| 3510 kN | 4850 kN | — | — | 135.81 kg135810 g |
| TIMKEN23252EMBW507C08Spherical roller bearing |
| 3510 kN | 4850 kN | — | — | 140.16 kg140160 g |
| TIMKEN23252EMBW507C08C2Spherical roller bearing |
| 3510 kN | 4850 kN | — | — | 140.16 kg140160 g |
| TIMKEN23252EMBW507C08C2SLCSpherical roller bearing |
| 3510 kN | 4850 kN | — | — | 142.9 kg142900 g |
| TIMKEN23252EMBW507C08C3Spherical roller bearing |
| 3510 kN | 4850 kN | — | — | 140.16 kg140160 g |
| TIMKEN23252KEJW507C08Spherical roller bearing |
| 3510 kN | 4850 kN | — | — | 131.68 kg131680 g |
| TIMKEN23252KEJW507C08C2Spherical roller bearing |
| 3510 kN | 4850 kN | — | — | 131.68 kg131680 g |
| TIMKEN23252KEJW507C08C3Spherical roller bearing |
| 3510 kN | 4850 kN | — | — | 131.68 kg131680 g |
| TIMKEN23252KEJW507C08C4Spherical roller bearing |
| 3510 kN | 4850 kN | — | — | 131.68 kg131680 g |
| TIMKEN23252KEJW906AC3Spherical roller bearing |
| 3510 kN | 4850 kN | — | — | 131.68 kg131680 g |
| TIMKEN23252KEMBW507C08Spherical roller bearing |
| 3510 kN | 4850 kN | — | — | 136 kg136000 g |
| TIMKEN23252KEMBW507C08C2Spherical roller bearing |
| 3510 kN | 4850 kN | — | — | 136 kg136000 g |
| TIMKEN23252KEMBW507C08C3Spherical roller bearing |
| 3510 kN | 4850 kN | — | — | 136 kg136000 g |
| TIMKEN23252KEMBW507C08C4Spherical roller bearing |
| 3510 kN | 4850 kN | — | — | 136 kg136000 g |
| TIMKEN23252KEMBW906AC3Spherical roller bearing |
| 3510 kN | 4850 kN | — | — | 135.85 kg135850 g |
| NSK23252CAME4Spherical roller bearing |
| 3400 kN | 4550 kN | — | — | 137 kg137000 g |
| NSK23252CAMKE4Spherical roller bearing |
| 3400 kN | 4550 kN | — | — | — |
| KOYO23252RSpherical roller bearing |
| 3440 kN | 4640 kN | — | 640 rpmLimiting Speeds(Grease Lub.): 640 min-1Limiting Speeds(Oil Lub.): 860 min-1 | 144 kg144000 g |
| KOYO23252RHASpherical roller bearing |
| 3590 kN | 4900 kN | — | 650 rpmLimiting Speeds(Grease Lub.): 650 min-1Limiting Speeds(Oil Lub.): 860 min-1 | 137 kg137000 g |
| KOYO23252RHAK+AH2352Spherical roller bearing |
| 3590 kN | 4900 kN | — | 650 rpmLimiting Speeds(Grease Lub.): 650 min-1Limiting Speeds(Oil Lub.): 860 min-1 | 153 kg153000 g |
| KOYO23252RHAK+H2352Spherical roller bearing |
| 3590 kN | 4900 kN | — | 650 rpmLimiting Speeds(Grease Lub.): 650 min-1Limiting Speeds(Oil Lub.): 860 min-1 | 158 kg158000 g |
| KOYO23252RK+AH2352Spherical roller bearing |
| 3440 kN | 4640 kN | — | 640 rpmLimiting Speeds(Grease Lub.): 640 min-1Limiting Speeds(Oil Lub.): 860 min-1 | 164 kg164000 g |
| KOYO23252RK+H2352Spherical roller bearing |
| 3440 kN | 4640 kN | — | 640 rpmLimiting Speeds(Grease Lub.): 640 min-1Limiting Speeds(Oil Lub.): 860 min-1 | 165 kg165000 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 23252 CAC/C3W33 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23252 CAC/C3W502 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23252 CAC/C3W507 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23252 CACK/C083W507 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23252 CACK/C08W507 | Without | Not recorded | CN | Machined brass | Not recorded | None |
| SKF 23252 CACK/C3W33 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23252 CACK/W33 | Without | Normal | CN | Machined brass | Not recorded | None |
| SKF 23252 CAC/W33 | Without | Normal | CN | Machined brass | Not recorded | None |
| SKF 23252 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23252 CCK/C08W33 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 23252 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23252 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 23252 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 23252-BEA-XL-K-MB1 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23252-BEA-XL-K-MB1-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23252-BEA-XL-K-MB1-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23252-BEA-XL-K-MB1-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23252-BEA-XL-MB1 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23252-BEA-XL-MB1-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23252-BEA-XL-MB1-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23252-BEA-XL-MB1-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | MB1 — Solid brass cage | Not recorded | Not recorded |
| TIMKEN 23252EJW507C08 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23252EJW507C08C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23252EJW507C08C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23252EJW507C08C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23252EJW509C08 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23252EMBW507C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23252EMBW507C08C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23252EMBW507C08C2SLC | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23252EMBW507C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23252KEJW507C08 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23252KEJW507C08C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23252KEJW507C08C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23252KEJW507C08C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23252KEJW906AC3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23252KEMBW507C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23252KEMBW507C08C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23252KEMBW507C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23252KEMBW507C08C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23252KEMBW906AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 23252CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23252CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| KOYO 23252R | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23252RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23252RHAK+AH2352 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23252RHAK+H2352 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23252RK+AH2352 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23252RK+H2352 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
FAG
23252-BEA-XL-K-MB1
Spherical Roller Bearing
View full technical record →FAG23252-BEA-XL-K-MB1-C2
Spherical Roller Bearing
View full technical record →FAG23252-BEA-XL-K-MB1-C3
Spherical Roller Bearing
View full technical record →FAG23252-BEA-XL-K-MB1-C4
Spherical Roller Bearing
View full technical record →FAG23252-BEA-XL-MB1
Spherical Roller Bearing
View full technical record →FAG23252-BEA-XL-MB1-C2
Spherical Roller Bearing
View full technical record →FAG23252-BEA-XL-MB1-C3
Spherical Roller Bearing
View full technical record →FAG23252-BEA-XL-MB1-C4
Spherical Roller Bearing
View full technical record →SKF23252 CAC/C3W33
Spherical roller bearing with relubrication features
View full technical record →SKF23252 CAC/C3W502
Spherical roller bearing with relubrication features
View full technical record →SKF23252 CAC/C3W507
Spherical roller bearing with relubrication features
View full technical record →SKF23252 CACK/C083W507
Spherical roller bearing with tapered bore and relubrication features
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.