Find · understand · compare
23236 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 23236. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
23236 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 43 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF23236-2CS5K/VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features |
| 1560 kN | 2120 kN | — | 640 rpm | 37 kg37000 g |
| SKF23236-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 1560 kN | 2120 kN | — | 640 rpm | 39.5 kg39500 g |
| SKF23236 CC/C3W33Spherical roller bearing with relubrication features |
| 1557 kN | 2120 kN | 1300 rpm | 1900 rpm | 38.2 kg38200 g |
| SKF23236 CC/C4W33Spherical roller bearing with relubrication features |
| 1557 kN | 2120 kN | 1300 rpm | 1900 rpm | 38.2 kg38200 g |
| SKF23236 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 1557 kN | 2120 kN | 1300 rpm | 1900 rpm | 37 kg37000 g |
| SKF23236 CCK/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 1557 kN | 2120 kN | 1300 rpm | 1900 rpm | 37 kg37000 g |
| SKF23236 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 1557 kN | 2120 kN | 1300 rpm | 1900 rpm | 37 kg37000 g |
| SKF23236 CC/W33Spherical roller bearing with relubrication features |
| 1557 kN | 2120 kN | 1300 rpm | 1900 rpm | 38.2 kg38200 g |
| FAG23236-E1A-XL-K-MSpherical Roller Bearing |
| 1720 kN | 2340 kN | 1090 rpm | 2010 rpm | 37.279 kg37279 g |
| FAG23236-E1A-XL-K-M-C3Spherical Roller Bearing |
| 1720 kN | 2340 kN | 1090 rpm | 2010 rpm | 37.8 kg37800 g |
| FAG23236-E1A-XL-K-M-C4Spherical Roller Bearing |
| 1720 kN | 2340 kN | 1090 rpm | 2010 rpm | 37.249 kg37249 g |
| FAG23236-E1A-XL-MSpherical Roller Bearing |
| 1720 kN | 2340 kN | 1090 rpm | 2010 rpm | 38.4 kg38400 g |
| FAG23236-E1A-XL-M-C3Spherical Roller Bearing |
| 1720 kN | 2340 kN | 1090 rpm | 2010 rpm | 38.371 kg38371 g |
| FAG23236-E1A-XL-M-C4Spherical Roller Bearing |
| 1720 kN | 2340 kN | 1090 rpm | 2010 rpm | 38.38 kg38380 g |
| FAG23236-E1-XL-K-TVPBSpherical Roller Bearing |
| 1720 kN | 2340 kN | 1090 rpm | 2010 rpm | 38.6 kg38600 g |
| FAG23236-E1-XL-K-TVPB-C3Spherical Roller Bearing |
| 1720 kN | 2340 kN | 1090 rpm | 2010 rpm | 38.6 kg38600 g |
| FAG23236-E1-XL-TVPBSpherical Roller Bearing |
| 1720 kN | 2340 kN | 1090 rpm | 2010 rpm | 36.349 kg36349 g |
| FAG23236-E1-XL-TVPB-C3Spherical Roller Bearing |
| 1720 kN | 2340 kN | 1090 rpm | 2010 rpm | 38.6 kg38600 g |
| TIMKEN23236EJW33Spherical roller bearing |
| 1720 kN | 2290 kN | — | — | 37.37 kg37370 g |
| TIMKEN23236EJW33C2Spherical roller bearing |
| 1720 kN | 2290 kN | — | — | 37.37 kg37370 g |
| TIMKEN23236EJW33C3Spherical roller bearing |
| 1720 kN | 2290 kN | — | — | 37.37 kg37370 g |
| TIMKEN23236EJW33C4Spherical roller bearing |
| 1720 kN | 2290 kN | — | — | 37.37 kg37370 g |
| TIMKEN23236EMBW33Spherical roller bearing |
| 1720 kN | 2290 kN | — | — | 38.61 kg38610 g |
| TIMKEN23236EMBW33C2Spherical roller bearing |
| 1720 kN | 2290 kN | — | — | 38.61 kg38610 g |
| TIMKEN23236EMBW33C3Spherical roller bearing |
| 1720 kN | 2290 kN | — | — | 38.61 kg38610 g |
| TIMKEN23236EMBW33C4Spherical roller bearing |
| 1720 kN | 2290 kN | — | — | 38.61 kg38610 g |
| TIMKEN23236KEJW33Spherical roller bearing |
| 1720 kN | 2290 kN | — | — | 36.18 kg36180 g |
| TIMKEN23236KEJW33C2Spherical roller bearing |
| 1720 kN | 2290 kN | — | — | 36.18 kg36180 g |
| TIMKEN23236KEJW33C3Spherical roller bearing |
| 1720 kN | 2290 kN | — | — | 36.18 kg36180 g |
| TIMKEN23236KEJW33C4Spherical roller bearing |
| 1720 kN | 2290 kN | — | — | 36.18 kg36180 g |
| TIMKEN23236KEMBW33Spherical roller bearing |
| 1720 kN | 2290 kN | — | — | 37.42 kg37420 g |
| TIMKEN23236KEMBW33C3Spherical roller bearing |
| 1720 kN | 2290 kN | — | — | 37.42 kg37420 g |
| TIMKEN23236KEMBW33C7Spherical roller bearing |
| 1720 kN | 2290 kN | — | — | 37.42 kg37420 g |
| NSK23236CAME4Spherical roller bearing |
| 1620 kN | 2110 kN | — | — | 38.9 kg38900 g |
| NSK23236CAMKE4Spherical roller bearing |
| 1620 kN | 2110 kN | — | — | — |
| NSK23236CE4Spherical roller bearing |
| 1630 kN | 2110 kN | — | — | 38.9 kg38900 g |
| NSK23236CKE4Spherical roller bearing |
| 1630 kN | 2110 kN | — | — | — |
| KOYO23236RHASpherical roller bearing |
| 1660 kN | 2170 kN | — | 1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1400 min-1 | 37.7 kg37700 g |
| KOYO23236RHAK+AH3236Spherical roller bearing |
| 1660 kN | 2170 kN | — | 1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1400 min-1 | 41.8 kg41800 g |
| KOYO23236RHAK+H2336Spherical roller bearing |
| 1660 kN | 2170 kN | — | 1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1400 min-1 | 48.4 kg48400 g |
| KOYO23236RRSpherical roller bearing |
| 1640 kN | 2100 kN | — | 1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1400 min-1 | 39.8 kg39800 g |
| KOYO23236RRK+AH3236Spherical roller bearing |
| 1640 kN | 2100 kN | — | 1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1400 min-1 | 45.1 kg45100 g |
| KOYO23236RRK+H2336Spherical roller bearing |
| 1640 kN | 2100 kN | — | 1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1400 min-1 | 50.5 kg50500 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 23236-2CS5K/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 23236-2CS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 23236 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23236 CC/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23236 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23236 CCK/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23236 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 23236 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 23236-E1A-XL-K-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 23236-E1A-XL-K-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 23236-E1A-XL-K-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 23236-E1A-XL-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 23236-E1A-XL-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 23236-E1A-XL-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 23236-E1-XL-K-TVPB | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23236-E1-XL-K-TVPB-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23236-E1-XL-TVPB | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23236-E1-XL-TVPB-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | TVPB — Plastic cage | Not recorded | Not recorded |
| TIMKEN 23236EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23236EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23236EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23236EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23236EMBW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23236EMBW33C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23236EMBW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23236EMBW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23236KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23236KEJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23236KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23236KEJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23236KEMBW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23236KEMBW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23236KEMBW33C7 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 23236CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23236CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23236CE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 23236CKE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 23236RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23236RHAK+AH3236 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23236RHAK+H2336 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23236RR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23236RRK+AH3236 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23236RRK+H2336 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
23236-2CS5K/VT143
Spherical roller bearing with tapered bore, integral sealing and relubrication features
View full technical record →SKF23236-2CS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →NSK23236CAME4
Spherical roller bearing
View full technical record →NSK23236CAMKE4
Spherical roller bearing
View full technical record →SKF23236 CC/C3W33
Spherical roller bearing with relubrication features
View full technical record →SKF23236 CC/C4W33
Spherical roller bearing with relubrication features
View full technical record →SKF23236 CCK/C3W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23236 CCK/C4W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23236 CCK/W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23236 CC/W33
Spherical roller bearing with relubrication features
View full technical record →NSK23236CE4
Spherical roller bearing
View full technical record →NSK23236CKE4
Spherical roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.