Find · understand · compare
23234 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 23234. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
23234 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 45 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF23234-2CS5K/VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features |
| 1476 kN | 1960 kN | — | 670 rpm | 35 kg35000 g |
| SKF23234-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 1476 kN | 1960 kN | — | 670 rpm | 35.8 kg35800 g |
| SKF23234 CC/C3W33Spherical roller bearing with relubrication features |
| 1472 kN | 1930 kN | 1400 rpm | 2000 rpm | 35.8 kg35800 g |
| SKF23234 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 1472 kN | 1930 kN | 1400 rpm | 2000 rpm | 34.8 kg34800 g |
| SKF23234 CCK/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 1472 kN | 1930 kN | 1400 rpm | 2000 rpm | 34.8 kg34800 g |
| SKF23234 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 1472 kN | 1930 kN | 1400 rpm | 2000 rpm | 34.8 kg34800 g |
| SKF23234 CC/W33Spherical roller bearing with relubrication features |
| 1472 kN | 1930 kN | 1400 rpm | 2000 rpm | 35.8 kg35800 g |
| FAG23234-E1A-XL-K-MSpherical Roller Bearing |
| 1640 kN | 2170 kN | 1160 rpm | 2090 rpm | 35.066 kg35066 g |
| FAG23234-E1A-XL-K-M-C3Spherical Roller Bearing |
| 1640 kN | 2170 kN | 1160 rpm | 2090 rpm | 35.401 kg35401 g |
| FAG23234-E1A-XL-K-M-C4Spherical Roller Bearing |
| 1640 kN | 2170 kN | 1160 rpm | 2090 rpm | 35.401 kg35401 g |
| FAG23234-E1A-XL-MSpherical Roller Bearing |
| 1640 kN | 2170 kN | 1160 rpm | 2090 rpm | 36.076 kg36076 g |
| FAG23234-E1A-XL-M-C3Spherical Roller Bearing |
| 1640 kN | 2170 kN | 1160 rpm | 2090 rpm | 36.07 kg36070 g |
| FAG23234-E1A-XL-M-C4Spherical Roller Bearing |
| 1640 kN | 2170 kN | 1160 rpm | 2090 rpm | 36.04 kg36040 g |
| FAG23234-E1A-XL-M-H40AB-C3Spherical Roller Bearing |
| 1640 kN | 2170 kN | 1160 rpm | 2090 rpm | 35.5 kg35500 g |
| FAG23234-E1-XL-K-TVPBSpherical Roller Bearing |
| 1640 kN | 2170 kN | 1160 rpm | 2090 rpm | 33.492 kg33492 g |
| FAG23234-E1-XL-K-TVPB-C3Spherical Roller Bearing |
| 1640 kN | 2170 kN | 1160 rpm | 2090 rpm | 33.476 kg33476 g |
| FAG23234-E1-XL-TVPBSpherical Roller Bearing |
| 1640 kN | 2170 kN | 1160 rpm | 2090 rpm | 34.522 kg34522 g |
| FAG23234-E1-XL-TVPB-C3Spherical Roller Bearing |
| 1640 kN | 2170 kN | 1160 rpm | 2090 rpm | 34.531 kg34531 g |
| TIMKEN23234EJW33Spherical roller bearing |
| 1660 kN | 2200 kN | — | — | 35.78 kg35780 g |
| TIMKEN23234EJW33C2Spherical roller bearing |
| 1660 kN | 2200 kN | — | — | 35.78 kg35780 g |
| TIMKEN23234EJW33C3Spherical roller bearing |
| 1660 kN | 2200 kN | — | — | 35.78 kg35780 g |
| TIMKEN23234EJW33C4Spherical roller bearing |
| 1660 kN | 2200 kN | — | — | 35.78 kg35780 g |
| TIMKEN23234EMW33Spherical roller bearing |
| 1660 kN | 2200 kN | — | — | 36.61 kg36610 g |
| TIMKEN23234EMW33C2Spherical roller bearing |
| 1660 kN | 2200 kN | — | — | 36.61 kg36610 g |
| TIMKEN23234EMW33C3Spherical roller bearing |
| 1660 kN | 2200 kN | — | — | 36.61 kg36610 g |
| TIMKEN23234EMW33C3SLBSpherical roller bearing |
| 1660 kN | 2200 kN | — | — | 37.32 kg37320 g |
| TIMKEN23234EMW33C4Spherical roller bearing |
| 1660 kN | 2200 kN | — | — | 36.61 kg36610 g |
| TIMKEN23234EMW33W800Spherical roller bearing |
| 1660 kN | 2200 kN | — | — | 36.6 kg36600 g |
| TIMKEN23234EMW33W800C4Spherical roller bearing |
| 1660 kN | 2200 kN | — | — | 36.6 kg36600 g |
| TIMKEN23234KEJW33Spherical roller bearing |
| 1660 kN | 2200 kN | — | — | 34.67 kg34670 g |
| TIMKEN23234KEJW33C2Spherical roller bearing |
| 1660 kN | 2200 kN | — | — | 34.67 kg34670 g |
| TIMKEN23234KEJW33C3Spherical roller bearing |
| 1660 kN | 2200 kN | — | — | 34.67 kg34670 g |
| TIMKEN23234KEJW33C4Spherical roller bearing |
| 1660 kN | 2200 kN | — | — | 34.67 kg34670 g |
| TIMKEN23234KEMW33Spherical roller bearing |
| 1660 kN | 2200 kN | — | — | 35.52 kg35520 g |
| TIMKEN23234KEMW33C3Spherical roller bearing |
| 1660 kN | 2200 kN | — | — | 35.52 kg35520 g |
| NSK23234CAME4Spherical roller bearing |
| 1500 kN | 1910 kN | — | — | 36.4 kg36400 g |
| NSK23234CAMKE4Spherical roller bearing |
| 1500 kN | 1910 kN | — | — | — |
| NSK23234CE4Spherical roller bearing |
| 1500 kN | 1910 kN | — | — | 36.4 kg36400 g |
| NSK23234CKE4Spherical roller bearing |
| 1500 kN | 1910 kN | — | — | — |
| KOYO23234RHASpherical roller bearing |
| 1520 kN | 1940 kN | — | 1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1500 min-1 | 35.6 kg35600 g |
| KOYO23234RHAK+AH3234Spherical roller bearing |
| 1520 kN | 1940 kN | — | 1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1500 min-1 | 39.4 kg39400 g |
| KOYO23234RHAK+H2334Spherical roller bearing |
| 1520 kN | 1940 kN | — | 1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1500 min-1 | 45.3 kg45300 g |
| KOYO23234RRSpherical roller bearing |
| 1560 kN | 1920 kN | — | 1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1500 min-1 | 37.2 kg37200 g |
| KOYO23234RRK+AH3234Spherical roller bearing |
| 1560 kN | 1920 kN | — | 1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1500 min-1 | 42.3 kg42300 g |
| KOYO23234RRK+H2334Spherical roller bearing |
| 1560 kN | 1920 kN | — | 1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1500 min-1 | 47.2 kg47200 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 23234-2CS5K/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 23234-2CS5/VT143 | Seal on both sides | Not recorded | CN | Sheet metal | Not recorded | Grease |
| SKF 23234 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23234 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23234 CCK/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23234 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 23234 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 23234-E1A-XL-K-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 23234-E1A-XL-K-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 23234-E1A-XL-K-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 23234-E1A-XL-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 23234-E1A-XL-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 23234-E1A-XL-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 23234-E1A-XL-M-H40AB-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 23234-E1-XL-K-TVPB | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23234-E1-XL-K-TVPB-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23234-E1-XL-TVPB | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23234-E1-XL-TVPB-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | TVPB — Plastic cage | Not recorded | Not recorded |
| TIMKEN 23234EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23234EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23234EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23234EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23234EMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23234EMW33C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23234EMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23234EMW33C3SLB | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23234EMW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23234EMW33W800 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23234EMW33W800C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23234KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23234KEJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23234KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23234KEJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23234KEMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23234KEMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 23234CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23234CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23234CE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 23234CKE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 23234RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23234RHAK+AH3234 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23234RHAK+H2334 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23234RR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23234RRK+AH3234 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23234RRK+H2334 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
23234-2CS5K/VT143
Spherical roller bearing with tapered bore, integral sealing and relubrication features
View full technical record →SKF23234-2CS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →NSK23234CAME4
Spherical roller bearing
View full technical record →NSK23234CAMKE4
Spherical roller bearing
View full technical record →SKF23234 CC/C3W33
Spherical roller bearing with relubrication features
View full technical record →SKF23234 CCK/C3W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23234 CCK/C4W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23234 CCK/W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23234 CC/W33
Spherical roller bearing with relubrication features
View full technical record →NSK23234CE4
Spherical roller bearing
View full technical record →NSK23234CKE4
Spherical roller bearing
View full technical record →FAG23234-E1A-XL-K-M
Spherical Roller Bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.