Find · understand · compare
23226 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 23226. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
23226 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 43 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF23226-2CS5K/VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features |
| 828 kN | 1060 kN | — | 900 rpm | 13.5 kg13500 g |
| SKF23226-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 828 kN | 1060 kN | — | 900 rpm | 14 kg14000 g |
| SKF23226 CC/C2MW33Spherical roller bearing with relubrication features |
| 826 kN | 1060 kN | 1900 rpm | 2600 rpm | 14.2 kg14200 g |
| SKF23226 CC/C3W33Spherical roller bearing with relubrication features |
| 826 kN | 1060 kN | 1900 rpm | 2600 rpm | 14.1 kg14100 g |
| SKF23226 CC/C4W33Spherical roller bearing with relubrication features |
| 826 kN | 1060 kN | 1900 rpm | 2600 rpm | 14.1 kg14100 g |
| SKF23226 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 826 kN | 1060 kN | 1900 rpm | 2600 rpm | 13.6 kg13600 g |
| SKF23226 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 826 kN | 1060 kN | 1900 rpm | 2600 rpm | 13.6 kg13600 g |
| SKF23226 CC/W33Spherical roller bearing with relubrication features |
| 826 kN | 1060 kN | 1900 rpm | 2600 rpm | 14.1 kg14100 g |
| FAG23226-E1A-XL-K-MSpherical Roller Bearing |
| 910 kN | 1150 kN | 1740 rpm | 2850 rpm | 13.57 kg13570 g |
| FAG23226-E1A-XL-K-M-C2Spherical Roller Bearing |
| 910 kN | 1150 kN | 1740 rpm | 2850 rpm | 13.559 kg13559 g |
| FAG23226-E1A-XL-K-M-C3Spherical Roller Bearing |
| 910 kN | 1150 kN | 1740 rpm | 2850 rpm | 13.567 kg13567 g |
| FAG23226-E1A-XL-K-M-C4Spherical Roller Bearing |
| 910 kN | 1150 kN | 1740 rpm | 2850 rpm | 13.552 kg13552 g |
| FAG23226-E1A-XL-MSpherical Roller Bearing |
| 910 kN | 1150 kN | 1740 rpm | 2850 rpm | 14.018 kg14018 g |
| FAG23226-E1A-XL-M-C3Spherical Roller Bearing |
| 910 kN | 1150 kN | 1740 rpm | 2850 rpm | 13.972 kg13972 g |
| FAG23226-E1A-XL-M-C4Spherical Roller Bearing |
| 910 kN | 1150 kN | 1740 rpm | 2850 rpm | 14 kg14000 g |
| FAG23226-E1A-XL-M-H40-C3Spherical Roller Bearing |
| 910 kN | 1150 kN | 1740 rpm | 2850 rpm | 14.05 kg14050 g |
| FAG23226-E1-XL-K-TVPBSpherical Roller Bearing |
| 910 kN | 1150 kN | 1740 rpm | 2850 rpm | 12.894 kg12894 g |
| FAG23226-E1-XL-K-TVPB-C3Spherical Roller Bearing |
| 910 kN | 1150 kN | 1740 rpm | 2850 rpm | 12.881 kg12881 g |
| FAG23226-E1-XL-TVPBSpherical Roller Bearing |
| 910 kN | 1150 kN | 1740 rpm | 2850 rpm | 13.306 kg13306 g |
| FAG23226-E1-XL-TVPB-C3Spherical Roller Bearing |
| 910 kN | 1150 kN | 1740 rpm | 2850 rpm | 13.28 kg13280 g |
| FAG23226-E1-XL-TVPB-C4Spherical Roller Bearing |
| 910 kN | 1150 kN | 1740 rpm | 2850 rpm | 13.4 kg13400 g |
| TIMKEN23226EJW33Spherical roller bearing |
| 915 kN | 1170 kN | — | — | 13.59 kg13590 g |
| TIMKEN23226EJW33C2Spherical roller bearing |
| 915 kN | 1170 kN | — | — | 13.59 kg13590 g |
| TIMKEN23226EJW33C3Spherical roller bearing |
| 915 kN | 1170 kN | — | — | 13.59 kg13590 g |
| TIMKEN23226EJW33C3SLASpherical roller bearing |
| 915 kN | 1170 kN | — | — | 13.94 kg13940 g |
| TIMKEN23226EJW33C4Spherical roller bearing |
| 915 kN | 1170 kN | — | — | 13.59 kg13590 g |
| TIMKEN23226EMW33Spherical roller bearing |
| 915 kN | 1170 kN | — | — | 13.97 kg13970 g |
| TIMKEN23226EMW33C3Spherical roller bearing |
| 915 kN | 1170 kN | — | — | 13.97 kg13970 g |
| TIMKEN23226EMW841Spherical roller bearing |
| 915 kN | 1170 kN | — | — | 14.1 kg14100 g |
| TIMKEN23226EMW841C3Spherical roller bearing |
| 915 kN | 1170 kN | — | — | 14.1 kg14100 g |
| TIMKEN23226KEJW33Spherical roller bearing |
| 915 kN | 1170 kN | — | — | 13.16 kg13160 g |
| TIMKEN23226KEJW33C3Spherical roller bearing |
| 915 kN | 1170 kN | — | — | 13.16 kg13160 g |
| TIMKEN23226KEJW33C4Spherical roller bearing |
| 915 kN | 1170 kN | — | — | 13.16 kg13160 g |
| TIMKEN23226KEMW33Spherical roller bearing |
| 915 kN | 1170 kN | — | — | 13.53 kg13530 g |
| TIMKEN23226KEMW33C3Spherical roller bearing |
| 915 kN | 1170 kN | — | — | 13.53 kg13530 g |
| TIMKEN23226KEMW33W999Spherical roller bearing |
| 915 kN | 1170 kN | — | — | 13.47 kg13470 g |
| NSK23226CAME4Spherical roller bearing |
| 875 kN | 1080 kN | — | — | 14.3 kg14300 g |
| NSK23226CAMKE4Spherical roller bearing |
| 875 kN | 1080 kN | — | — | — |
| NSK23226CE4Spherical roller bearing |
| 875 kN | 1080 kN | — | — | 14.3 kg14300 g |
| NSK23226CKE4Spherical roller bearing |
| 875 kN | 1080 kN | — | — | — |
| KOYO23226RHSpherical roller bearing |
| 880 kN | 1090 kN | — | 1900 rpmLimiting Speeds(Grease Lub.): 1900 min-1Limiting Speeds(Oil Lub.): 2600 min-1 | 14.4 kg14400 g |
| KOYO23226RZK+AHX3226Spherical roller bearing |
| 880 kN | 1090 kN | — | 1900 rpmLimiting Speeds(Grease Lub.): 1900 min-1Limiting Speeds(Oil Lub.): 2600 min-1 | 15.6 kg15600 g |
| KOYO23226RZK+H2326Spherical roller bearing |
| 880 kN | 1090 kN | — | 1900 rpmLimiting Speeds(Grease Lub.): 1900 min-1Limiting Speeds(Oil Lub.): 2600 min-1 | 18.8 kg18800 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 23226-2CS5K/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 23226-2CS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 23226 CC/C2MW33 | Without | Not recorded | C2M | Sheet metal | Not recorded | None |
| SKF 23226 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23226 CC/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23226 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23226 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 23226 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 23226-E1A-XL-K-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 23226-E1A-XL-K-M-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 23226-E1A-XL-K-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 23226-E1A-XL-K-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 23226-E1A-XL-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 23226-E1A-XL-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 23226-E1A-XL-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 23226-E1A-XL-M-H40-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 23226-E1-XL-K-TVPB | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23226-E1-XL-K-TVPB-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23226-E1-XL-TVPB | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23226-E1-XL-TVPB-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23226-E1-XL-TVPB-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | TVPB — Plastic cage | Not recorded | Not recorded |
| TIMKEN 23226EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23226EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23226EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23226EJW33C3SLA | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23226EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23226EMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23226EMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23226EMW841 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23226EMW841C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23226KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23226KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23226KEJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23226KEMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23226KEMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23226KEMW33W999 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 23226CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23226CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23226CE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 23226CKE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 23226RH | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23226RZK+AHX3226 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23226RZK+H2326 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
23226-2CS5K/VT143
Spherical roller bearing with tapered bore, integral sealing and relubrication features
View full technical record →SKF23226-2CS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →NSK23226CAME4
Spherical roller bearing
View full technical record →NSK23226CAMKE4
Spherical roller bearing
View full technical record →SKF23226 CC/C2MW33
Spherical roller bearing with relubrication features
View full technical record →SKF23226 CC/C3W33
Spherical roller bearing with relubrication features
View full technical record →SKF23226 CC/C4W33
Spherical roller bearing with relubrication features
View full technical record →SKF23226 CCK/C3W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23226 CCK/W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23226 CC/W33
Spherical roller bearing with relubrication features
View full technical record →NSK23226CE4
Spherical roller bearing
View full technical record →NSK23226CKE4
Spherical roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.