Find · understand · compare
23222 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 23222. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
23222 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 42 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF23222-2CS5K/VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features |
| 627 kN | 765 kN | — | 1000 rpm | 9.24 kg9240 g |
| SKF23222-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 627 kN | 765 kN | — | 1000 rpm | 9.5 kg9500 g |
| SKF23222 CC/C3W33Spherical roller bearing with relubrication features |
| 626 kN | 765 kN | 2200 rpm | 3200 rpm | 9.54 kg9540 g |
| SKF23222 CC/C4W33Spherical roller bearing with relubrication features |
| 626 kN | 765 kN | 2200 rpm | 3200 rpm | 9.54 kg9540 g |
| SKF23222 CCK/C2W33Spherical roller bearing with tapered bore and relubrication features |
| 626 kN | 765 kN | 2200 rpm | 3200 rpm | 9.24 kg9240 g |
| SKF23222 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 626 kN | 765 kN | 2200 rpm | 3200 rpm | 9.27 kg9270 g |
| SKF23222 CCK/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 626 kN | 765 kN | 2200 rpm | 3200 rpm | 9.27 kg9270 g |
| SKF23222 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 626 kN | 765 kN | 2200 rpm | 3200 rpm | 9.27 kg9270 g |
| SKF23222 CC/W33Spherical roller bearing with relubrication features |
| 626 kN | 765 kN | 2200 rpm | 3200 rpm | 9.54 kg9540 g |
| FAG23222-E1A-XL-K-MSpherical Roller Bearing |
| 710 kN | 870 kN | 2100 rpm | 3250 rpm | 9.289 kg9289 g |
| FAG23222-E1A-XL-K-M-C3Spherical Roller Bearing |
| 710 kN | 870 kN | 2100 rpm | 3250 rpm | 9.285 kg9285 g |
| FAG23222-E1A-XL-K-M-C4Spherical Roller Bearing |
| 710 kN | 870 kN | 2100 rpm | 3250 rpm | 9.5 kg9500 g |
| FAG23222-E1A-XL-MSpherical Roller Bearing |
| 710 kN | 870 kN | 2100 rpm | 3250 rpm | 9.556 kg9556 g |
| FAG23222-E1A-XL-M-C3Spherical Roller Bearing |
| 710 kN | 870 kN | 2100 rpm | 3250 rpm | 9.557 kg9557 g |
| FAG23222-E1A-XL-M-C4Spherical Roller Bearing |
| 710 kN | 870 kN | 2100 rpm | 3250 rpm | 9.54 kg9540 g |
| FAG23222-E1A-XL-M-H151BSpherical Roller Bearing |
| 710 kN | 870 kN | 2100 rpm | 3250 rpm | 9.554 kg9554 g |
| FAG23222-E1-XL-K-TVPBSpherical Roller Bearing |
| 710 kN | 870 kN | 2100 rpm | 3250 rpm | 8.84 kg8840 g |
| FAG23222-E1-XL-K-TVPB-C3Spherical Roller Bearing |
| 710 kN | 870 kN | 2100 rpm | 3250 rpm | 8.84 kg8840 g |
| FAG23222-E1-XL-TVPBSpherical Roller Bearing |
| 710 kN | 870 kN | 2100 rpm | 3250 rpm | 9.106 kg9106 g |
| FAG23222-E1-XL-TVPB-C3Spherical Roller Bearing |
| 710 kN | 870 kN | 2100 rpm | 3250 rpm | 9.103 kg9103 g |
| FAG23222-E1-XL-TVPB-C4Spherical Roller Bearing |
| 710 kN | 870 kN | 2100 rpm | 3250 rpm | 9.083 kg9083 g |
| TIMKEN23222EJW33Spherical roller bearing |
| 708 kN | 887 kN | — | — | 9.33 kg9330 g |
| TIMKEN23222EJW33C2Spherical roller bearing |
| 708 kN | 887 kN | — | — | 9.33 kg9330 g |
| TIMKEN23222EJW33C3Spherical roller bearing |
| 708 kN | 887 kN | — | — | 9.33 kg9330 g |
| TIMKEN23222EJW33C4Spherical roller bearing |
| 708 kN | 887 kN | — | — | 9.33 kg9330 g |
| TIMKEN23222EMW33Spherical roller bearing |
| 708 kN | 887 kN | — | — | 9.55 kg9550 g |
| TIMKEN23222EMW33C2Spherical roller bearing |
| 708 kN | 887 kN | — | — | 9.55 kg9550 g |
| TIMKEN23222EMW33C3Spherical roller bearing |
| 708 kN | 887 kN | — | — | 9.55 kg9550 g |
| TIMKEN23222EMW33C4Spherical roller bearing |
| 708 kN | 887 kN | — | — | 9.55 kg9550 g |
| TIMKEN23222KEJW33Spherical roller bearing |
| 708 kN | 887 kN | — | — | 9.05 kg9050 g |
| TIMKEN23222KEJW33C3Spherical roller bearing |
| 708 kN | 887 kN | — | — | 9.05 kg9050 g |
| TIMKEN23222KEJW33C4Spherical roller bearing |
| 708 kN | 887 kN | — | — | 9.05 kg9050 g |
| TIMKEN23222KEMW33Spherical roller bearing |
| 708 kN | 887 kN | — | — | 9.27 kg9270 g |
| TIMKEN23222KEMW33C3Spherical roller bearing |
| 708 kN | 887 kN | — | — | 9.27 kg9270 g |
| TIMKEN23222KEMW33C4Spherical roller bearing |
| 708 kN | 887 kN | — | — | 9.27 kg9270 g |
| NSK23222CAME4Spherical roller bearing |
| 645 kN | 760 kN | — | — | 9.54 kg9540 g |
| NSK23222CAMKE4Spherical roller bearing |
| 645 kN | 760 kN | — | — | — |
| NSK23222CE4Spherical roller bearing |
| 645 kN | 760 kN | — | — | 9.54 kg9540 g |
| NSK23222CKE4Spherical roller bearing |
| 645 kN | 760 kN | — | — | — |
| KOYO23222RHSpherical roller bearing |
| 672 kN | 792 kN | — | 2300 rpmLimiting Speeds(Grease Lub.): 2300 min-1Limiting Speeds(Oil Lub.): 3000 min-1 | 9.76 kg9760 g |
| KOYO23222RZK+AHX3222Spherical roller bearing |
| 672 kN | 792 kN | — | 2300 rpmLimiting Speeds(Grease Lub.): 2300 min-1Limiting Speeds(Oil Lub.): 3000 min-1 | 10.5 kg10500 g |
| KOYO23222RZK+H2322XSpherical roller bearing |
| 672 kN | 792 kN | — | 2300 rpmLimiting Speeds(Grease Lub.): 2300 min-1Limiting Speeds(Oil Lub.): 3000 min-1 | 12.4 kg12400 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 23222-2CS5K/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 23222-2CS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 23222 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23222 CC/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23222 CCK/C2W33 | Without | Not recorded | C2 | Sheet metal | Not recorded | None |
| SKF 23222 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23222 CCK/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23222 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 23222 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 23222-E1A-XL-K-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 23222-E1A-XL-K-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 23222-E1A-XL-K-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 23222-E1A-XL-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 23222-E1A-XL-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 23222-E1A-XL-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 23222-E1A-XL-M-H151B | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 23222-E1-XL-K-TVPB | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23222-E1-XL-K-TVPB-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23222-E1-XL-TVPB | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23222-E1-XL-TVPB-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23222-E1-XL-TVPB-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | TVPB — Plastic cage | Not recorded | Not recorded |
| TIMKEN 23222EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23222EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23222EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23222EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23222EMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23222EMW33C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23222EMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23222EMW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23222KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23222KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23222KEJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23222KEMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23222KEMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23222KEMW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 23222CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23222CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23222CE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 23222CKE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 23222RH | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23222RZK+AHX3222 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23222RZK+H2322X | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
23222-2CS5K/VT143
Spherical roller bearing with tapered bore, integral sealing and relubrication features
View full technical record →SKF23222-2CS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →NSK23222CAME4
Spherical roller bearing
View full technical record →NSK23222CAMKE4
Spherical roller bearing
View full technical record →SKF23222 CC/C3W33
Spherical roller bearing with relubrication features
View full technical record →SKF23222 CC/C4W33
Spherical roller bearing with relubrication features
View full technical record →SKF23222 CCK/C2W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23222 CCK/C3W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23222 CCK/C4W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23222 CCK/W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23222 CC/W33
Spherical roller bearing with relubrication features
View full technical record →NSK23222CE4
Spherical roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.