99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

23220 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 23220. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

23220 dimensions and recorded technical data

Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 49 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
SKF23220-2RS5/C4GEM9Spherical roller bearing with integral sealing and relubrication features
Recorded bore (d)
100 mm
3.937008 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
60.3 mm
2.374016 in
499 kN600 kN——6.52 kg6520 g
SKF23220-2RS5/VT143Spherical roller bearing with integral sealing and relubrication features
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
499 kN600 kN—1700 rpm6.44 kg6440 g
SKF23220-2RS/C3VT143Spherical roller bearing with integral sealing and relubrication features
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
499 kN600 kN—1700 rpm6.51 kg6510 g
SKF23220-2RS/VT143Spherical roller bearing with integral sealing and relubrication features
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
499 kN600 kN—1700 rpm6.44 kg6440 g
SKF23220/C3W33VA9B1Spherical roller bearing for continuous casters, with relubrication features
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
—600 kN—20 rpm6.5 kg6500 g
SKF23220/C4W33VA9B1Spherical roller bearing for continuous casters, with relubrication features
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
—600 kN—20 rpm6.5 kg6500 g
SKF23220 CC/C2W33Spherical roller bearing with relubrication features
Recorded bore (d)
100 mm
3.937008 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
60.3 mm
2.374016 in
498 kN600 kN2400 rpm3400 rpm6.55 kg6550 g
SKF23220 CC/C3W33Spherical roller bearing with relubrication features
Recorded bore (d)
100 mm
3.937008 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
60.3 mm
2.374016 in
498 kN600 kN2400 rpm3400 rpm6.55 kg6550 g
SKF23220 CC/C4W33Spherical roller bearing with relubrication features
Recorded bore (d)
100 mm
3.937008 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
60.3 mm
2.374016 in
498 kN600 kN2400 rpm3400 rpm6.55 kg6550 g
SKF23220 CCK/C2W33Spherical roller bearing with tapered bore and relubrication features
Recorded bore (d)
100 mm
3.937008 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
60.3 mm
2.374016 in
498 kN600 kN2400 rpm3400 rpm6.4 kg6400 g
SKF23220 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features
Recorded bore (d)
100 mm
3.937008 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
60.3 mm
2.374016 in
498 kN600 kN2400 rpm3400 rpm6.37 kg6370 g
SKF23220 CCK/W33Spherical roller bearing with tapered bore and relubrication features
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
498 kN600 kN2400 rpm3400 rpm6.37 kg6370 g
SKF23220 CC/W33Spherical roller bearing with relubrication features
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
498 kN600 kN2400 rpm3400 rpm6.55 kg6550 g
FAG23220-CP-M-C3Spherical Roller Bearing
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
—660 kN—30 rpm6.6 kg6600 g
FAG23220-CP-M-C4Spherical Roller Bearing
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
—660 kN—30 rpm6.6 kg6600 g
FAG23220-E1A-XL-K-MSpherical Roller Bearing
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
560 kN660 kN2410 rpm3750 rpm6.39 kg6390 g
FAG23220-E1A-XL-K-M-C2Spherical Roller Bearing
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
560 kN660 kN2410 rpm3750 rpm6.39 kg6390 g
FAG23220-E1A-XL-K-M-C3Spherical Roller Bearing
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
560 kN660 kN2410 rpm3750 rpm6.39 kg6390 g
FAG23220-E1A-XL-K-M-C4Spherical Roller Bearing
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
560 kN660 kN2410 rpm3750 rpm6.37 kg6370 g
FAG23220-E1A-XL-MSpherical Roller Bearing
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
560 kN660 kN2410 rpm3750 rpm6.595 kg6595 g
FAG23220-E1A-XL-M-C2Spherical Roller Bearing
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
560 kN660 kN2410 rpm3750 rpm6.56 kg6560 g
FAG23220-E1A-XL-M-C3Spherical Roller Bearing
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
560 kN660 kN2410 rpm3750 rpm6.595 kg6595 g
FAG23220-E1A-XL-M-C4Spherical Roller Bearing
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
560 kN660 kN2410 rpm3750 rpm6.566 kg6566 g
FAG23220-E1-XL-K-TVPBSpherical Roller Bearing
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
560 kN660 kN2410 rpm3750 rpm6.07 kg6070 g
FAG23220-E1-XL-K-TVPB-C2Spherical Roller Bearing
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
560 kN660 kN2410 rpm3750 rpm6.062 kg6062 g
FAG23220-E1-XL-K-TVPB-C3Spherical Roller Bearing
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
560 kN660 kN2410 rpm3750 rpm6.195 kg6195 g
FAG23220-E1-XL-K-TVPB-C4Spherical Roller Bearing
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
560 kN660 kN2410 rpm3750 rpm6.2 kg6200 g
FAG23220-E1-XL-TVPBSpherical Roller Bearing
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
560 kN660 kN2410 rpm3750 rpm6.25 kg6250 g
FAG23220-E1-XL-TVPB-C3Spherical Roller Bearing
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
560 kN660 kN2410 rpm3750 rpm6.364 kg6364 g
FAG23220-E1-XL-TVPB-C4Spherical Roller Bearing
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
560 kN660 kN2410 rpm3750 rpm6.232 kg6232 g
TIMKEN23220EJW33Spherical roller bearing
Recorded bore (d)
100 mm
3.937008 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
60.3 mm
2.374016 in
553 kN678 kN——6.47 kg6470 g
TIMKEN23220EJW33C2Spherical roller bearing
Recorded bore (d)
100 mm
3.937008 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
60.3 mm
2.374016 in
553 kN678 kN——6.47 kg6470 g
TIMKEN23220EJW33C3Spherical roller bearing
Recorded bore (d)
100 mm
3.937008 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
60.3 mm
2.374016 in
553 kN678 kN——6.47 kg6470 g
TIMKEN23220EJW33C4Spherical roller bearing
Recorded bore (d)
100 mm
3.937008 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
60.3 mm
2.374016 in
553 kN678 kN——6.47 kg6470 g
TIMKEN23220EMW33Spherical roller bearing
Recorded bore (d)
100 mm
3.937008 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
60.3 mm
2.374016 in
553 kN678 kN——6.6 kg6600 g
TIMKEN23220EMW33C2Spherical roller bearing
Recorded bore (d)
100 mm
3.937008 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
60.3 mm
2.374016 in
553 kN678 kN——6.6 kg6600 g
TIMKEN23220EMW33C3Spherical roller bearing
Recorded bore (d)
100 mm
3.937008 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
60.3 mm
2.374016 in
553 kN678 kN——6.6 kg6600 g
TIMKEN23220EMW33C4Spherical roller bearing
Recorded bore (d)
100 mm
3.937008 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
60.3 mm
2.374016 in
553 kN678 kN——6.6 kg6600 g
TIMKEN23220KEJW33Spherical roller bearing
Recorded bore (d)
100 mm
3.937008 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
60.3 mm
2.374016 in
553 kN678 kN——6.28 kg6280 g
TIMKEN23220KEJW33C2Spherical roller bearing
Recorded bore (d)
100 mm
3.937008 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
60.3 mm
2.374016 in
553 kN678 kN——6.28 kg6280 g
TIMKEN23220KEJW33C3Spherical roller bearing
Recorded bore (d)
100 mm
3.937008 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
60.3 mm
2.374016 in
553 kN678 kN——6.28 kg6280 g
TIMKEN23220KEMW33C3Spherical roller bearing
Recorded bore (d)
100 mm
3.937008 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
60.3 mm
2.374016 in
553 kN678 kN——6.41 kg6410 g
NSK23220CAME4Spherical roller bearing
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Bearing width (B)
60.3 mm
2.374016 in
525 kN605 kN——6.6 kg6600 g
NSK23220CAMKE4Spherical roller bearing
Nominal bore diameter (1:12 taper) (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Bearing width (B)
60.3 mm
2.374016 in
525 kN605 kN———
NSK23220CE4Spherical roller bearing
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Bearing width (B)
60.3 mm
2.374016 in
525 kN605 kN——6.6 kg6600 g
NSK23220CKE4Spherical roller bearing
Nominal bore diameter (1:12 taper) (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Bearing width (B)
60.3 mm
2.374016 in
525 kN605 kN———
KOYO23220RHSpherical roller bearing
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
533 kN629 kN—2600 rpmLimiting Speeds(Grease Lub.): 2600 min-1Limiting Speeds(Oil Lub.): 3400 min-16.85 kg6850 g
KOYO23220RZK+AHX3220Spherical roller bearing
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
533 kN629 kN—2600 rpmLimiting Speeds(Grease Lub.): 2600 min-1Limiting Speeds(Oil Lub.): 3400 min-17.43 kg7430 g
KOYO23220RZK+H2320XSpherical roller bearing
Bore diameter (d)
100 mm
3.937008 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
60.3 mm
2.374016 in
533 kN629 kN—2600 rpmLimiting Speeds(Grease Lub.): 2600 min-1Limiting Speeds(Oil Lub.): 3400 min-18.94 kg8940 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
SKF 23220-2RS5/C4GEM9Seal on both sidesNot recordedC4Sheet metalNot recordedGrease
SKF 23220-2RS5/VT143Seal on both sidesNormalCNSheet metalNot recordedGrease
SKF 23220-2RS/C3VT143Seal on both sidesNormalC3Sheet metalNot recordedGrease
SKF 23220-2RS/VT143Seal on both sidesNormalCNSheet metalNot recordedGrease
SKF 23220/C3W33VA9B1WithoutNormalC3Sheet metalNot recordedNone
SKF 23220/C4W33VA9B1WithoutNormalC4Sheet metalNot recordedNone
SKF 23220 CC/C2W33WithoutNot recordedC2Sheet metalNot recordedNone
SKF 23220 CC/C3W33WithoutNot recordedC3Sheet metalNot recordedNone
SKF 23220 CC/C4W33WithoutNot recordedC4Sheet metalNot recordedNone
SKF 23220 CCK/C2W33WithoutNot recordedC2Sheet metalNot recordedNone
SKF 23220 CCK/C3W33WithoutNot recordedC3Sheet metalNot recordedNone
SKF 23220 CCK/W33WithoutNormalCNSheet metalNot recordedNone
SKF 23220 CC/W33WithoutNormalCNSheet metalNot recordedNone
FAG 23220-CP-M-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNM — Brass CageNot recordedNot recorded
FAG 23220-CP-M-C4Not recordedNot recordedC4 (Group 4) — Internal clearance larger than C3M — Brass CageNot recordedNot recorded
FAG 23220-E1A-XL-K-MNot recordedNot recordedCN (Group N) — Normal internal clearanceM — Brass CageNot recordedNot recorded
FAG 23220-E1A-XL-K-M-C2Not recordedNot recordedC2 (Group 2) — Internal clearance smaller than CNM — Brass CageNot recordedNot recorded
FAG 23220-E1A-XL-K-M-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNM — Brass CageNot recordedNot recorded
FAG 23220-E1A-XL-K-M-C4Not recordedNot recordedC4 (Group 4) — Internal clearance larger than C3M — Brass CageNot recordedNot recorded
FAG 23220-E1A-XL-MNot recordedNot recordedCN (Group N) — Normal internal clearanceM — Brass CageNot recordedNot recorded
FAG 23220-E1A-XL-M-C2Not recordedNot recordedC2 (Group 2) — Internal clearance smaller than CNM — Brass CageNot recordedNot recorded
FAG 23220-E1A-XL-M-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNM — Brass CageNot recordedNot recorded
FAG 23220-E1A-XL-M-C4Not recordedNot recordedC4 (Group 4) — Internal clearance larger than C3M — Brass CageNot recordedNot recorded
FAG 23220-E1-XL-K-TVPBNot recordedNot recordedCN (Group N) — Normal internal clearanceTVPB — Plastic cageNot recordedNot recorded
FAG 23220-E1-XL-K-TVPB-C2Not recordedNot recordedC2 (Group 2) — Internal clearance smaller than CNTVPB — Plastic cageNot recordedNot recorded
FAG 23220-E1-XL-K-TVPB-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNTVPB — Plastic cageNot recordedNot recorded
FAG 23220-E1-XL-K-TVPB-C4Not recordedNot recordedC4 (Group 4) — Internal clearance larger than C3TVPB — Plastic cageNot recordedNot recorded
FAG 23220-E1-XL-TVPBNot recordedNot recordedCN (Group N) — Normal internal clearanceTVPB — Plastic cageNot recordedNot recorded
FAG 23220-E1-XL-TVPB-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNTVPB — Plastic cageNot recordedNot recorded
FAG 23220-E1-XL-TVPB-C4Not recordedNot recordedC4 (Group 4) — Internal clearance larger than C3TVPB — Plastic cageNot recordedNot recorded
TIMKEN 23220EJW33OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23220EJW33C2OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23220EJW33C3OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23220EJW33C4OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23220EMW33OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23220EMW33C2OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23220EMW33C3OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23220EMW33C4OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23220KEJW33OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23220KEJW33C2OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23220KEJW33C3OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23220KEMW33C3OpenNot recordedNot recordedBrass cageNot recordedNot recorded
NSK 23220CAME4Not recordedNot recordedCNMachined brassNot recordedNot recorded
NSK 23220CAMKE4Not recordedNot recordedCNMachined brassNot recordedNot recorded
NSK 23220CE4Not recordedNot recordedCNPressed steelNot recordedNot recorded
NSK 23220CKE4Not recordedNot recordedCNPressed steelNot recordedNot recorded
KOYO 23220RHNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 23220RZK+AHX3220Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 23220RZK+H2320XNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

SKF

23220-2RS5/C4GEM9

Spherical roller bearing with integral sealing and relubrication features

View full technical record →SKF

23220-2RS5/VT143

Spherical roller bearing with integral sealing and relubrication features

View full technical record →SKF

23220-2RS/C3VT143

Spherical roller bearing with integral sealing and relubrication features

View full technical record →SKF

23220-2RS/VT143

Spherical roller bearing with integral sealing and relubrication features

View full technical record →SKF

23220/C3W33VA9B1

Spherical roller bearing for continuous casters, with relubrication features

View full technical record →SKF

23220/C4W33VA9B1

Spherical roller bearing for continuous casters, with relubrication features

View full technical record →NSK

23220CAME4

Spherical roller bearing

View full technical record →NSK

23220CAMKE4

Spherical roller bearing

View full technical record →SKF

23220 CC/C2W33

Spherical roller bearing with relubrication features

View full technical record →SKF

23220 CC/C3W33

Spherical roller bearing with relubrication features

View full technical record →SKF

23220 CC/C4W33

Spherical roller bearing with relubrication features

View full technical record →SKF

23220 CCK/C2W33

Spherical roller bearing with tapered bore and relubrication features

View full technical record →
Filter all 49 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search