Find · understand · compare
23156 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 23156. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
23156 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 60 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF23156-2CS5K/VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features |
| 2788 kN | 4250 kN | — | 420 rpm | 94.8 kg94800 g |
| SKF23156-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 2788 kN | 4250 kN | — | 420 rpm | 94.8 kg94800 g |
| SKF23156 CAC/C083W507Spherical roller bearing with relubrication features |
| 2688 kN | 4000 kN | 1000 rpm | 1300 rpm | 97 kg97000 g |
| SKF23156 CAC/C08W507Spherical roller bearing with relubrication features |
| 2688 kN | 4000 kN | 1000 rpm | 1300 rpm | 97 kg97000 g |
| SKF23156 CAC/C3W33Spherical roller bearing with relubrication features |
| 2688 kN | 4000 kN | 1000 rpm | 1300 rpm | 97 kg97000 g |
| SKF23156 CAC/C4W33Spherical roller bearing with relubrication features |
| 2688 kN | 4000 kN | 1000 rpm | 1300 rpm | 97 kg97000 g |
| SKF23156 CACK/C082W507Spherical roller bearing with tapered bore and relubrication features |
| 2688 kN | 4000 kN | 1000 rpm | 1300 rpm | 93.9 kg93900 g |
| SKF23156 CACK/C083W507Spherical roller bearing with tapered bore and relubrication features |
| 2688 kN | 4000 kN | 1000 rpm | 1300 rpm | 93.9 kg93900 g |
| SKF23156 CACK/C08W507Spherical roller bearing with tapered bore and relubrication features |
| 2688 kN | 4000 kN | 1000 rpm | 1300 rpm | 93.9 kg93900 g |
| SKF23156 CACK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 2688 kN | 4000 kN | 1000 rpm | 1300 rpm | 93.9 kg93900 g |
| SKF23156 CACK/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 2688 kN | 4000 kN | 1000 rpm | 1300 rpm | 93.9 kg93900 g |
| SKF23156 CACK/W33Spherical roller bearing with tapered bore and relubrication features |
| 2688 kN | 4000 kN | 1000 rpm | 1300 rpm | 93.9 kg93900 g |
| SKF23156 CAC/W33Spherical roller bearing with relubrication features |
| 2688 kN | 4000 kN | 1000 rpm | 1300 rpm | 97 kg97000 g |
| SKF23156 CAC/W513Spherical roller bearing with relubrication features |
| 2688 kN | 4000 kN | 1000 rpm | 1300 rpm | 97 kg97000 g |
| SKF23156 CC/C3W33Spherical roller bearing with relubrication features |
| 2784 kN | 4250 kN | 1000 rpm | 1300 rpm | 95.3 kg95300 g |
| SKF23156 CC/C4W33Spherical roller bearing with relubrication features |
| 2784 kN | 4250 kN | 1000 rpm | 1300 rpm | 95.3 kg95300 g |
| SKF23156 CCK/C083W33Spherical roller bearing with tapered bore and relubrication features |
| 2784 kN | 4250 kN | 1000 rpm | 1300 rpm | 92.3 kg92300 g |
| SKF23156 CCK/C084W33Spherical roller bearing with tapered bore and relubrication features |
| 2784 kN | 4250 kN | 1000 rpm | 1300 rpm | 92.3 kg92300 g |
| SKF23156 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 2784 kN | 4250 kN | 1000 rpm | 1300 rpm | 92.3 kg92300 g |
| SKF23156 CCK/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 2784 kN | 4250 kN | 1000 rpm | 1300 rpm | 92.3 kg92300 g |
| SKF23156 CCK/HA3C4W33Spherical roller bearing with tapered bore and relubrication features |
| 2784 kN | 4250 kN | 1000 rpm | 1300 rpm | 92.3 kg92300 g |
| SKF23156 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 2784 kN | 4250 kN | 1000 rpm | 1300 rpm | 92.3 kg92300 g |
| SKF23156 CC/W33Spherical roller bearing with relubrication features |
| 2784 kN | 4250 kN | 1000 rpm | 1300 rpm | 95.3 kg95300 g |
| FAG23156-BE-XLSpherical Roller Bearing |
| 2750 kN | 4200 kN | 790 rpm | 1420 rpm | 93.47 kg93470 g |
| FAG23156-BE-XL-2RSRSpherical Roller Bearing |
| 2750 kN | 4200 kN | — | 355 rpm | 93.9 kg93900 g |
| FAG23156-BE-XL-C3Spherical Roller Bearing |
| 2750 kN | 4200 kN | 790 rpm | 1420 rpm | 93.5 kg93500 g |
| FAG23156-BE-XL-C4Spherical Roller Bearing |
| 2750 kN | 4200 kN | 790 rpm | 1420 rpm | 93.45 kg93450 g |
| FAG23156-BE-XL-C5Spherical Roller Bearing |
| 2750 kN | 4200 kN | 790 rpm | 1420 rpm | 96.4 kg96400 g |
| FAG23156-BE-XL-H40Spherical Roller Bearing |
| 2750 kN | 4200 kN | 790 rpm | 1420 rpm | 94.05 kg94050 g |
| FAG23156-BE-XL-KSpherical Roller Bearing |
| 2750 kN | 4200 kN | 790 rpm | 1420 rpm | 90.555 kg90555 g |
| FAG23156-BE-XL-K-2RSRSpherical Roller Bearing |
| 2750 kN | 4200 kN | — | 355 rpm | 90.8 kg90800 g |
| FAG23156-BE-XL-K-C2Spherical Roller Bearing |
| 2750 kN | 4200 kN | 790 rpm | 1420 rpm | 90.6 kg90600 g |
| FAG23156-BE-XL-K-C3Spherical Roller Bearing |
| 2750 kN | 4200 kN | 790 rpm | 1420 rpm | 90.51 kg90510 g |
| FAG23156-BE-XL-K-C4Spherical Roller Bearing |
| 2750 kN | 4200 kN | 790 rpm | 1420 rpm | 90.5 kg90500 g |
| TIMKEN23156EJW45CC08Spherical roller bearing |
| 2780 kN | 4170 kN | — | — | 93.83 kg93830 g |
| TIMKEN23156EJW507C08Spherical roller bearing |
| 2780 kN | 4170 kN | — | — | 93.27 kg93270 g |
| TIMKEN23156EJW507C08C2Spherical roller bearing |
| 2780 kN | 4170 kN | — | — | 93.27 kg93270 g |
| TIMKEN23156EJW507C08C3Spherical roller bearing |
| 2780 kN | 4170 kN | — | — | 93.27 kg93270 g |
| TIMKEN23156EMBW45CC08Spherical roller bearing |
| 2780 kN | 4170 kN | — | — | 97.43 kg97430 g |
| TIMKEN23156EMBW507C08Spherical roller bearing |
| 2780 kN | 4170 kN | — | — | 96.8 kg96800 g |
| TIMKEN23156EMBW507C08C2Spherical roller bearing |
| 2780 kN | 4170 kN | — | — | 96.8 kg96800 g |
| TIMKEN23156EMBW507C08C3Spherical roller bearing |
| 2780 kN | 4170 kN | — | — | 96.8 kg96800 g |
| TIMKEN23156KEJW40IW534C4Spherical roller bearing |
| 2780 kN | 4170 kN | — | — | 90.07 kg90070 g |
| TIMKEN23156KEJW507C08Spherical roller bearing |
| 2780 kN | 4170 kN | — | — | 90.13 kg90130 g |
| TIMKEN23156KEJW507C08C2Spherical roller bearing |
| 2780 kN | 4170 kN | — | — | 90.13 kg90130 g |
| TIMKEN23156KEJW507C08C3Spherical roller bearing |
| 2780 kN | 4170 kN | — | — | 90.13 kg90130 g |
| TIMKEN23156KEJW507C08C7Spherical roller bearing |
| 2780 kN | 4170 kN | — | — | 90.13 kg90130 g |
| TIMKEN23156KEMBW507C08Spherical roller bearing |
| 2780 kN | 4170 kN | — | — | 93.77 kg93770 g |
| TIMKEN23156KEMBW507C08C2Spherical roller bearing |
| 2780 kN | 4170 kN | — | — | 93.77 kg93770 g |
| TIMKEN23156KEMBW507C08C3Spherical roller bearing |
| 2780 kN | 4170 kN | — | — | 93.77 kg93770 g |
| TIMKEN23156KEMBW898C4Spherical roller bearing |
| 2780 kN | 4170 kN | — | — | 93.77 kg93770 g |
| TIMKEN23156KEMBW898XC5Spherical roller bearing |
| 2780 kN | 4170 kN | — | — | 93.75 kg93750 g |
| NSK23156CAME4Spherical roller bearing |
| 2790 kN | 4000 kN | — | — | 94.3 kg94300 g |
| NSK23156CAMKE4Spherical roller bearing |
| 2790 kN | 4000 kN | — | — | — |
| KOYO23156RHASpherical roller bearing |
| 2940 kN | 4290 kN | — | 650 rpmLimiting Speeds(Grease Lub.): 650 min-1Limiting Speeds(Oil Lub.): 870 min-1 | 93.4 kg93400 g |
| KOYO23156RHAK+AH3156Spherical roller bearing |
| 2940 kN | 4290 kN | — | 650 rpmLimiting Speeds(Grease Lub.): 650 min-1Limiting Speeds(Oil Lub.): 870 min-1 | 108 kg108000 g |
| KOYO23156RHAK+H3156Spherical roller bearing |
| 2940 kN | 4290 kN | — | 650 rpmLimiting Speeds(Grease Lub.): 650 min-1Limiting Speeds(Oil Lub.): 870 min-1 | 116 kg116000 g |
| KOYO23156RRSpherical roller bearing |
| 2910 kN | 4160 kN | — | 660 rpmLimiting Speeds(Grease Lub.): 660 min-1Limiting Speeds(Oil Lub.): 880 min-1 | 98.8 kg98800 g |
| KOYO23156RRK+AH3156Spherical roller bearing |
| 2910 kN | 4160 kN | — | 660 rpmLimiting Speeds(Grease Lub.): 660 min-1Limiting Speeds(Oil Lub.): 880 min-1 | 114 kg114000 g |
| KOYO23156RRK+H3156Spherical roller bearing |
| 2910 kN | 4160 kN | — | 660 rpmLimiting Speeds(Grease Lub.): 660 min-1Limiting Speeds(Oil Lub.): 880 min-1 | 123 kg123000 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 23156-2CS5K/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 23156-2CS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 23156 CAC/C083W507 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23156 CAC/C08W507 | Without | Not recorded | CN | Machined brass | Not recorded | None |
| SKF 23156 CAC/C3W33 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23156 CAC/C4W33 | Without | Not recorded | C4 | Machined brass | Not recorded | None |
| SKF 23156 CACK/C082W507 | Without | Not recorded | C2 | Machined brass | Not recorded | None |
| SKF 23156 CACK/C083W507 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23156 CACK/C08W507 | Without | Not recorded | CN | Machined brass | Not recorded | None |
| SKF 23156 CACK/C3W33 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23156 CACK/C4W33 | Without | Not recorded | C4 | Machined brass | Not recorded | None |
| SKF 23156 CACK/W33 | Without | Normal | CN | Machined brass | Not recorded | None |
| SKF 23156 CAC/W33 | Without | Normal | CN | Machined brass | Not recorded | None |
| SKF 23156 CAC/W513 | Without | Not recorded | CN | Machined brass | Not recorded | None |
| SKF 23156 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23156 CC/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23156 CCK/C083W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23156 CCK/C084W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23156 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23156 CCK/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23156 CCK/HA3C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23156 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 23156 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 23156-BE-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23156-BE-XL-2RSR | 2RSR — Seals on both sides, normal temperature | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23156-BE-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23156-BE-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23156-BE-XL-C5 | Not recorded | Not recorded | C5 (Group 5) — Internal clearance larger than C4 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23156-BE-XL-H40 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23156-BE-XL-K | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23156-BE-XL-K-2RSR | 2RSR — Seals on both sides, normal temperature | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23156-BE-XL-K-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23156-BE-XL-K-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23156-BE-XL-K-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 23156EJW45CC08 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23156EJW507C08 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23156EJW507C08C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23156EJW507C08C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23156EMBW45CC08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23156EMBW507C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23156EMBW507C08C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23156EMBW507C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23156KEJW40IW534C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23156KEJW507C08 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23156KEJW507C08C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23156KEJW507C08C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23156KEJW507C08C7 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23156KEMBW507C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23156KEMBW507C08C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23156KEMBW507C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23156KEMBW898C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23156KEMBW898XC5 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 23156CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23156CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| KOYO 23156RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23156RHAK+AH3156 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23156RHAK+H3156 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23156RR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23156RRK+AH3156 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23156RRK+H3156 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
FAG
231/560-BEA-XL-K-MB1
Spherical Roller Bearing
View full technical record →FAG231/560-BEA-XL-K-MB1-C3
Spherical Roller Bearing
View full technical record →FAG231/560-BEA-XL-MB1
Spherical Roller Bearing
View full technical record →FAG231/560-BEA-XL-MB1-C3
Spherical Roller Bearing
View full technical record →FAG231/560-BEA-XL-MB1-H40
Spherical Roller Bearing
View full technical record →SKF231/560 CAK/C08W507
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF231/560 CAK/C3W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF231/560 CAK/W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →NSK231/560CAME4
Spherical roller bearing
View full technical record →NSK231/560CAMKE4
Spherical roller bearing
View full technical record →SKF231/560 CA/W33
Spherical roller bearing with relubrication features
View full technical record →TIMKEN231/560KYMBW33W45A
Spherical roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.