Find · understand · compare
23140 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 23140. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
23140 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 59 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF23140-2CS5K/VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features |
| 1668 kN | 2360 kN | — | 580 rpm | 40 kg40000 g |
| SKF23140-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 1668 kN | 2360 kN | — | 580 rpm | 41.3 kg41300 g |
| SKF23140 CC/C3W33Spherical roller bearing with relubrication features |
| 1665 kN | 2360 kN | 1500 rpm | 1900 rpm | 41.4 kg41400 g |
| SKF23140 CC/C4W33Spherical roller bearing with relubrication features |
| 1665 kN | 2360 kN | 1500 rpm | 1900 rpm | 41.4 kg41400 g |
| SKF23140 CCK/C08W507Spherical roller bearing with tapered bore and relubrication features |
| 1665 kN | 2360 kN | 1500 rpm | 1900 rpm | 40.4 kg40400 g |
| SKF23140 CCK/C2W33Spherical roller bearing with tapered bore and relubrication features |
| 1665 kN | 2360 kN | 1500 rpm | 1900 rpm | 41.5 kg41500 g |
| SKF23140 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 1665 kN | 2360 kN | 1500 rpm | 1900 rpm | 40.1 kg40100 g |
| SKF23140 CCK/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 1665 kN | 2360 kN | 1500 rpm | 1900 rpm | 40.1 kg40100 g |
| SKF23140 CCK/HA3C4W33Spherical roller bearing with tapered bore and relubrication features |
| 1665 kN | 2360 kN | 1500 rpm | 1900 rpm | 40.1 kg40100 g |
| SKF23140 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 1665 kN | 2360 kN | 1500 rpm | 1900 rpm | 40.1 kg40100 g |
| SKF23140 CC/W33Spherical roller bearing with relubrication features |
| 1665 kN | 2360 kN | 1500 rpm | 1900 rpm | 41.4 kg41400 g |
| SKF23140 CC/W513Spherical roller bearing with relubrication features |
| 1665 kN | 2360 kN | 1500 rpm | 1900 rpm | 41.4 kg41400 g |
| FAG23140-BE-XLSpherical Roller Bearing |
| 1610 kN | 2270 kN | 1230 rpm | 2040 rpm | 40.28 kg40280 g |
| FAG23140-BE-XL-2RSRSpherical Roller Bearing |
| 1620 kN | 2270 kN | — | 510 rpm | 41.5 kg41500 g |
| FAG23140-BE-XL>ASpherical Roller Bearing |
| 1610 kN | 2270 kN | 1230 rpm | 2040 rpm | 44.5 kg44500 g |
| FAG23140-BE-XL-C2Spherical Roller Bearing |
| 1610 kN | 2270 kN | 1230 rpm | 2040 rpm | 40.32 kg40320 g |
| FAG23140-BE-XL-C3Spherical Roller Bearing |
| 1610 kN | 2270 kN | 1230 rpm | 2040 rpm | 40.285 kg40285 g |
| FAG23140-BE-XL-C3>CSpherical Roller Bearing |
| 1610 kN | 2270 kN | 1230 rpm | 2040 rpm | 41.5 kg41500 g |
| FAG23140-BE-XL-C4Spherical Roller Bearing |
| 1610 kN | 2270 kN | 1230 rpm | 2040 rpm | 40.1 kg40100 g |
| FAG23140-BE-XL-C5Spherical Roller Bearing |
| 1610 kN | 2270 kN | 1230 rpm | 2040 rpm | 41.5 kg41500 g |
| FAG23140-BE-XL-KSpherical Roller Bearing |
| 1610 kN | 2270 kN | 1230 rpm | 2040 rpm | 39 kg39000 g |
| FAG23140-BE-XL-K-2RSRSpherical Roller Bearing |
| 1620 kN | 2270 kN | — | 510 rpm | 39.1 kg39100 g |
| FAG23140-BE-XL-K>ASpherical Roller Bearing |
| 1610 kN | 2270 kN | 1230 rpm | 2040 rpm | 39.16 kg39160 g |
| FAG23140-BE-XL-K-C3Spherical Roller Bearing |
| 1610 kN | 2270 kN | 1230 rpm | 2040 rpm | 39.015 kg39015 g |
| FAG23140-BE-XL-K-C3>BSpherical Roller Bearing |
| 1610 kN | 2270 kN | 1230 rpm | 2040 rpm | 40.2 kg40200 g |
| FAG23140-BE-XL-K-C4Spherical Roller Bearing |
| 1610 kN | 2270 kN | 1230 rpm | 2040 rpm | 38.995 kg38995 g |
| TIMKEN23140EJW33Spherical roller bearing |
| 1720 kN | 2400 kN | — | — | 40.87 kg40870 g |
| TIMKEN23140EJW33C2Spherical roller bearing |
| 1720 kN | 2400 kN | — | — | 40.87 kg40870 g |
| TIMKEN23140EJW33C3Spherical roller bearing |
| 1720 kN | 2400 kN | — | — | 40.87 kg40870 g |
| TIMKEN23140EJW33C4Spherical roller bearing |
| 1720 kN | 2400 kN | — | — | 40.87 kg40870 g |
| TIMKEN23140EJW841W40EC3Spherical roller bearing |
| 1720 kN | 2400 kN | — | — | 41.02 kg41020 g |
| TIMKEN23140EMBW33Spherical roller bearing |
| 1660 kN | 2290 kN | — | — | 42.03 kg42030 g |
| TIMKEN23140EMBW33C2Spherical roller bearing |
| 1660 kN | 2290 kN | — | — | 42.03 kg42030 g |
| TIMKEN23140EMBW33C3Spherical roller bearing |
| 1660 kN | 2290 kN | — | — | 42.03 kg42030 g |
| TIMKEN23140EMBW33C4Spherical roller bearing |
| 1660 kN | 2290 kN | — | — | 42.03 kg42030 g |
| TIMKEN23140EMBW33W40C3Spherical roller bearing |
| 1660 kN | 2290 kN | — | — | 41.97 kg41970 g |
| TIMKEN23140EMBW841W40ESpherical roller bearing |
| 1660 kN | 2290 kN | — | — | 42.17 kg42170 g |
| TIMKEN23140KEJW33Spherical roller bearing |
| 1720 kN | 2400 kN | — | — | 39.51 kg39510 g |
| TIMKEN23140KEJW33C2Spherical roller bearing |
| 1720 kN | 2400 kN | — | — | 39.51 kg39510 g |
| TIMKEN23140KEJW33C3Spherical roller bearing |
| 1720 kN | 2400 kN | — | — | 39.51 kg39510 g |
| TIMKEN23140KEJW33C4Spherical roller bearing |
| 1720 kN | 2400 kN | — | — | 39.51 kg39510 g |
| TIMKEN23140KEJW507C08C3Spherical roller bearing |
| 1720 kN | 2400 kN | — | — | 39.53 kg39530 g |
| TIMKEN23140KEMBW33Spherical roller bearing |
| 1660 kN | 2290 kN | — | — | 40.71 kg40710 g |
| TIMKEN23140KEMBW33C3Spherical roller bearing |
| 1660 kN | 2290 kN | — | — | 40.71 kg40710 g |
| TIMKEN23140KEMBW40IW534C3Spherical roller bearing |
| 1660 kN | 2290 kN | — | — | 40.71 kg40710 g |
| TIMKEN23140KEMBW40IW534C4Spherical roller bearing |
| 1660 kN | 2290 kN | — | — | 40.71 kg40710 g |
| TIMKEN23140KEMBW507C08Spherical roller bearing |
| 1660 kN | 2290 kN | — | — | 40.71 kg40710 g |
| TIMKEN23140KEMBW507C08C3Spherical roller bearing |
| 1660 kN | 2290 kN | — | — | 40.71 kg40710 g |
| TIMKEN23140KEMBW507C08C4Spherical roller bearing |
| 1660 kN | 2290 kN | — | — | 40.71 kg40710 g |
| NSK23140CAME4Spherical roller bearing |
| 1700 kN | 2330 kN | — | — | 42.7 kg42700 g |
| NSK23140CAMKE4Spherical roller bearing |
| 1700 kN | 2330 kN | — | — | — |
| NSK23140CE4Spherical roller bearing |
| 1700 kN | 2330 kN | — | — | 42.7 kg42700 g |
| NSK23140CKE4Spherical roller bearing |
| 1700 kN | 2330 kN | — | — | — |
| KOYO23140RHASpherical roller bearing |
| 1730 kN | 2340 kN | — | 970 rpmLimiting Speeds(Grease Lub.): 970 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 40.8 kg40800 g |
| KOYO23140RHAK+AH3140Spherical roller bearing |
| 1730 kN | 2340 kN | — | 970 rpmLimiting Speeds(Grease Lub.): 970 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 45 kg45000 g |
| KOYO23140RHAK+H3140Spherical roller bearing |
| 1730 kN | 2340 kN | — | 970 rpmLimiting Speeds(Grease Lub.): 970 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 51.8 kg51800 g |
| KOYO23140RRSpherical roller bearing |
| 1740 kN | 2350 kN | — | 980 rpmLimiting Speeds(Grease Lub.): 980 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 43.3 kg43300 g |
| KOYO23140RRK+AH3140Spherical roller bearing |
| 1740 kN | 2350 kN | — | 980 rpmLimiting Speeds(Grease Lub.): 980 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 47.9 kg47900 g |
| KOYO23140RRK+H3140Spherical roller bearing |
| 1740 kN | 2350 kN | — | 980 rpmLimiting Speeds(Grease Lub.): 980 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 54.7 kg54700 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 23140-2CS5K/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 23140-2CS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 23140 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23140 CC/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23140 CCK/C08W507 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 23140 CCK/C2W33 | Without | Not recorded | C2 | Sheet metal | Not recorded | None |
| SKF 23140 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23140 CCK/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23140 CCK/HA3C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23140 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 23140 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 23140 CC/W513 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| FAG 23140-BE-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23140-BE-XL-2RSR | 2RSR — Seals on both sides, normal temperature | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23140-BE-XL>A | Not recorded | Not recorded | Not recorded | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23140-BE-XL-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23140-BE-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23140-BE-XL-C3>C | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23140-BE-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23140-BE-XL-C5 | Not recorded | Not recorded | C5 (Group 5) — Internal clearance larger than C4 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23140-BE-XL-K | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23140-BE-XL-K-2RSR | 2RSR — Seals on both sides, normal temperature | Not recorded | Not recorded | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23140-BE-XL-K>A | Not recorded | Not recorded | Not recorded | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23140-BE-XL-K-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23140-BE-XL-K-C3>B | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23140-BE-XL-K-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 23140EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23140EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23140EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23140EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23140EJW841W40EC3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23140EMBW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23140EMBW33C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23140EMBW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23140EMBW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23140EMBW33W40C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23140EMBW841W40E | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23140KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23140KEJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23140KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23140KEJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23140KEJW507C08C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23140KEMBW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23140KEMBW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23140KEMBW40IW534C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23140KEMBW40IW534C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23140KEMBW507C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23140KEMBW507C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23140KEMBW507C08C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 23140CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23140CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23140CE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 23140CKE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 23140RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23140RHAK+AH3140 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23140RHAK+H3140 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23140RR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23140RRK+AH3140 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23140RRK+H3140 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
23140-2CS5K/VT143
Spherical roller bearing with tapered bore, integral sealing and relubrication features
View full technical record →SKF23140-2CS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →FAG23140-BE-XL
Spherical Roller Bearing
View full technical record →FAG23140-BE-XL-2RSR
Spherical Roller Bearing
View full technical record →FAG23140-BE-XL>A
Spherical Roller Bearing
View full technical record →FAG23140-BE-XL-C2
Spherical Roller Bearing
View full technical record →FAG23140-BE-XL-C3
Spherical Roller Bearing
View full technical record →FAG23140-BE-XL-C3>C
Spherical Roller Bearing
View full technical record →FAG23140-BE-XL-C4
Spherical Roller Bearing
View full technical record →FAG23140-BE-XL-C5
Spherical Roller Bearing
View full technical record →FAG23140-BE-XL-K
Spherical Roller Bearing
View full technical record →FAG23140-BE-XL-K-2RSR
Spherical Roller Bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.