99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

23136 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 23136. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

23136 dimensions and recorded technical data

Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 51 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
SKF23136-2CS5K/C4GEM9Spherical roller bearing with tapered bore, integral sealing and relubrication features
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1264 kN1800 kN—430 rpm26.5 kg26500 g
SKF23136-2CS5K/VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1264 kN1800 kN—660 rpm26.5 kg26500 g
SKF23136-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1264 kN1800 kN—660 rpm27.1 kg27100 g
SKF23136 CC/C3W33Spherical roller bearing with relubrication features
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1263 kN1760 kN1700 rpm2200 rpm27.1 kg27100 g
SKF23136 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1263 kN1760 kN1700 rpm2200 rpm26.2 kg26200 g
SKF23136 CCK/C4W33Spherical roller bearing with tapered bore and relubrication features
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1263 kN1760 kN1700 rpm2200 rpm26.2 kg26200 g
SKF23136 CCK/W33Spherical roller bearing with tapered bore and relubrication features
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1263 kN1760 kN1700 rpm2200 rpm26.2 kg26200 g
SKF23136 CC/W33Spherical roller bearing with relubrication features
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1263 kN1760 kN1700 rpm2200 rpm27.1 kg27100 g
FAG23136-E1A-XL-K-MSpherical Roller Bearing
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1420 kN1950 kN1350 rpm2230 rpm26.091 kg26091 g
FAG23136-E1A-XL-K-M-C2Spherical Roller Bearing
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1420 kN1950 kN1350 rpm2230 rpm26.11 kg26110 g
FAG23136-E1A-XL-K-M-C3Spherical Roller Bearing
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1420 kN1950 kN1350 rpm2230 rpm26.08 kg26080 g
FAG23136-E1A-XL-K-M-C4Spherical Roller Bearing
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1420 kN1950 kN1350 rpm2230 rpm26.067 kg26067 g
FAG23136-E1A-XL-MSpherical Roller Bearing
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1420 kN1950 kN1350 rpm2230 rpm26.919 kg26919 g
FAG23136-E1A-XL-M-C3Spherical Roller Bearing
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1420 kN1950 kN1350 rpm2230 rpm26.907 kg26907 g
FAG23136-E1A-XL-M-C4Spherical Roller Bearing
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1420 kN1950 kN1350 rpm2230 rpm27 kg27000 g
FAG23136-E1A-XL-M-C5Spherical Roller Bearing
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1420 kN1950 kN1350 rpm2230 rpm26.902 kg26902 g
FAG23136-E1-XL-K-TVPBSpherical Roller Bearing
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1420 kN1950 kN1350 rpm2230 rpm24.744 kg24744 g
FAG23136-E1-XL-K-TVPB-C3Spherical Roller Bearing
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1420 kN1950 kN1350 rpm2230 rpm25.132 kg25132 g
FAG23136-E1-XL-K-TVPB-C4Spherical Roller Bearing
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1420 kN1950 kN1350 rpm2230 rpm24.738 kg24738 g
FAG23136-E1-XL-TVPBSpherical Roller Bearing
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1420 kN1950 kN1350 rpm2230 rpm25.566 kg25566 g
FAG23136-E1-XL-TVPB-C3Spherical Roller Bearing
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1420 kN1950 kN1350 rpm2230 rpm25.963 kg25963 g
TIMKEN23136EJW33Spherical roller bearing
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1410 kN2000 kN——26.91 kg26910 g
TIMKEN23136EJW33C2Spherical roller bearing
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1410 kN2000 kN——26.91 kg26910 g
TIMKEN23136EJW33C3Spherical roller bearing
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1410 kN2000 kN——26.91 kg26910 g
TIMKEN23136EJW33C4Spherical roller bearing
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1410 kN2000 kN——26.91 kg26910 g
TIMKEN23136EMW33Spherical roller bearing
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1410 kN2000 kN——27.62 kg27620 g
TIMKEN23136EMW33C3Spherical roller bearing
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1410 kN2000 kN——27.62 kg27620 g
TIMKEN23136EMW33C4Spherical roller bearing
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1410 kN2000 kN——27.62 kg27620 g
TIMKEN23136EMW33C5Spherical roller bearing
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1410 kN2000 kN——27.62 kg27620 g
TIMKEN23136EMW507C08Spherical roller bearing
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1410 kN2000 kN——27.62 kg27620 g
TIMKEN23136EMW507C08C3Spherical roller bearing
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1410 kN2000 kN——27.62 kg27620 g
TIMKEN23136KEJW33Spherical roller bearing
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1410 kN2000 kN——26.04 kg26040 g
TIMKEN23136KEJW33C3Spherical roller bearing
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1410 kN2000 kN——26.04 kg26040 g
TIMKEN23136KEJW33C5Spherical roller bearing
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1410 kN2000 kN——26.04 kg26040 g
TIMKEN23136KEJW33W40IC4Spherical roller bearing
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1410 kN2000 kN——26.01 kg26010 g
TIMKEN23136KEMW33Spherical roller bearing
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1410 kN2000 kN——26.75 kg26750 g
TIMKEN23136KEMW33C2Spherical roller bearing
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1410 kN2000 kN——26.75 kg26750 g
TIMKEN23136KEMW33C3Spherical roller bearing
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1410 kN2000 kN——26.75 kg26750 g
TIMKEN23136KEMW33C4Spherical roller bearing
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1410 kN2000 kN——26.75 kg26750 g
TIMKEN23136KEMW507C08Spherical roller bearing
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1410 kN2000 kN——26.75 kg26750 g
TIMKEN23136KEMW507C08C3Spherical roller bearing
Recorded bore (d)
180 mm
7.086614 in
Recorded outside dimension (D)
300 mm
11.811024 in
Catalogue width (symbol unverified)
96 mm
3.779528 in
1410 kN2000 kN——26.75 kg26750 g
NSK23136CAME4Spherical roller bearing
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Bearing width (B)
96 mm
3.779528 in
1320 kN1760 kN——27.5 kg27500 g
NSK23136CAMKE4Spherical roller bearing
Nominal bore diameter (1:12 taper) (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Bearing width (B)
96 mm
3.779528 in
1320 kN1760 kN———
NSK23136CE4Spherical roller bearing
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Bearing width (B)
96 mm
3.779528 in
1320 kN1760 kN——27.5 kg27500 g
NSK23136CKE4Spherical roller bearing
Nominal bore diameter (1:12 taper) (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Bearing width (B)
96 mm
3.779528 in
1320 kN1760 kN———
KOYO23136RSpherical roller bearing
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1260 kN1800 kN—1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1500 min-128.4 kg28400 g
KOYO23136RHASpherical roller bearing
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1330 kN1790 kN—1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1500 min-126.5 kg26500 g
KOYO23136RHAK+AH3136Spherical roller bearing
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1330 kN1790 kN—1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1500 min-129.8 kg29800 g
KOYO23136RHAK+H3136Spherical roller bearing
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1330 kN1790 kN—1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1500 min-135.2 kg35200 g
KOYO23136RK+AH3136Spherical roller bearing
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1260 kN1800 kN—1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1500 min-131.7 kg31700 g
KOYO23136RK+H3136Spherical roller bearing
Bore diameter (d)
180 mm
7.086614 in
Outside diameter (D)
300 mm
11.811024 in
Width (B)
96 mm
3.779528 in
1260 kN1800 kN—1100 rpmLimiting Speeds(Grease Lub.): 1100 min-1Limiting Speeds(Oil Lub.): 1500 min-137.1 kg37100 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
SKF 23136-2CS5K/C4GEM9Seal on both sidesNot recordedC4Sheet metalNot recordedGrease
SKF 23136-2CS5K/VT143Seal on both sidesNormalCNSheet metalNot recordedGrease
SKF 23136-2CS5/VT143Seal on both sidesNormalCNSheet metalNot recordedGrease
SKF 23136 CC/C3W33WithoutNot recordedC3Sheet metalNot recordedNone
SKF 23136 CCK/C3W33WithoutNot recordedC3Sheet metalNot recordedNone
SKF 23136 CCK/C4W33WithoutNot recordedC4Sheet metalNot recordedNone
SKF 23136 CCK/W33WithoutNormalCNSheet metalNot recordedNone
SKF 23136 CC/W33WithoutNormalCNSheet metalNot recordedNone
FAG 23136-E1A-XL-K-MNot recordedNot recordedCN (Group N) — Normal internal clearanceM — Brass CageNot recordedNot recorded
FAG 23136-E1A-XL-K-M-C2Not recordedNot recordedC2 (Group 2) — Internal clearance smaller than CNM — Brass CageNot recordedNot recorded
FAG 23136-E1A-XL-K-M-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNM — Brass CageNot recordedNot recorded
FAG 23136-E1A-XL-K-M-C4Not recordedNot recordedC4 (Group 4) — Internal clearance larger than C3M — Brass CageNot recordedNot recorded
FAG 23136-E1A-XL-MNot recordedNot recordedCN (Group N) — Normal internal clearanceM — Brass CageNot recordedNot recorded
FAG 23136-E1A-XL-M-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNM — Brass CageNot recordedNot recorded
FAG 23136-E1A-XL-M-C4Not recordedNot recordedC4 (Group 4) — Internal clearance larger than C3M — Brass CageNot recordedNot recorded
FAG 23136-E1A-XL-M-C5Not recordedNot recordedNot recordedM — Brass CageNot recordedNot recorded
FAG 23136-E1-XL-K-TVPBNot recordedNot recordedCN (Group N) — Normal internal clearanceTVPB — Plastic cageNot recordedNot recorded
FAG 23136-E1-XL-K-TVPB-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNTVPB — Plastic cageNot recordedNot recorded
FAG 23136-E1-XL-K-TVPB-C4Not recordedNot recordedC4 (Group 4) — Internal clearance larger than C3TVPB — Plastic cageNot recordedNot recorded
FAG 23136-E1-XL-TVPBNot recordedNot recordedCN (Group N) — Normal internal clearanceTVPB — Plastic cageNot recordedNot recorded
FAG 23136-E1-XL-TVPB-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNTVPB — Plastic cageNot recordedNot recorded
TIMKEN 23136EJW33OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23136EJW33C2OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23136EJW33C3OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23136EJW33C4OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23136EMW33OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23136EMW33C3OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23136EMW33C4OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23136EMW33C5OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23136EMW507C08OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23136EMW507C08C3OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23136KEJW33OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23136KEJW33C3OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23136KEJW33C5OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23136KEJW33W40IC4OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23136KEMW33OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23136KEMW33C2OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23136KEMW33C3OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23136KEMW33C4OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23136KEMW507C08OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23136KEMW507C08C3OpenNot recordedNot recordedBrass cageNot recordedNot recorded
NSK 23136CAME4Not recordedNot recordedCNMachined brassNot recordedNot recorded
NSK 23136CAMKE4Not recordedNot recordedCNMachined brassNot recordedNot recorded
NSK 23136CE4Not recordedNot recordedCNPressed steelNot recordedNot recorded
NSK 23136CKE4Not recordedNot recordedCNPressed steelNot recordedNot recorded
KOYO 23136RNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 23136RHANot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 23136RHAK+AH3136Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 23136RHAK+H3136Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 23136RK+AH3136Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 23136RK+H3136Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

SKF

23136-2CS5K/C4GEM9

Spherical roller bearing with tapered bore, integral sealing and relubrication features

View full technical record →SKF

23136-2CS5K/VT143

Spherical roller bearing with tapered bore, integral sealing and relubrication features

View full technical record →SKF

23136-2CS5/VT143

Spherical roller bearing with integral sealing and relubrication features

View full technical record →NSK

23136CAME4

Spherical roller bearing

View full technical record →NSK

23136CAMKE4

Spherical roller bearing

View full technical record →SKF

23136 CC/C3W33

Spherical roller bearing with relubrication features

View full technical record →SKF

23136 CCK/C3W33

Spherical roller bearing with tapered bore and relubrication features

View full technical record →SKF

23136 CCK/C4W33

Spherical roller bearing with tapered bore and relubrication features

View full technical record →SKF

23136 CCK/W33

Spherical roller bearing with tapered bore and relubrication features

View full technical record →SKF

23136 CC/W33

Spherical roller bearing with relubrication features

View full technical record →NSK

23136CE4

Spherical roller bearing

View full technical record →NSK

23136CKE4

Spherical roller bearing

View full technical record →
Filter all 51 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search