Find · understand · compare
23132 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 23132. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
23132 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 43 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF23132-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 1030 kN | 1400 kN | — | 740 rpm | 19.8 kg19800 g |
| SKF23132-2CS5W/GEM9Spherical roller bearing with integral sealing |
| 1030 kN | 1400 kN | — | 140 rpm | 19.8 kg19800 g |
| SKF23132 CC/C3W33Spherical roller bearing with relubrication features |
| 1029 kN | 1370 kN | 1900 rpm | 2400 rpm | 19.8 kg19800 g |
| SKF23132 CC/C4W33Spherical roller bearing with relubrication features |
| 1029 kN | 1370 kN | 1900 rpm | 2400 rpm | 19.8 kg19800 g |
| SKF23132 CCK/C2W33Spherical roller bearing with tapered bore and relubrication features |
| 1029 kN | 1370 kN | 1900 rpm | 2400 rpm | 19.2 kg19200 g |
| SKF23132 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 1029 kN | 1370 kN | 1900 rpm | 2400 rpm | 19.2 kg19200 g |
| SKF23132 CCK/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 1029 kN | 1370 kN | 1900 rpm | 2400 rpm | 19.2 kg19200 g |
| SKF23132 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 1029 kN | 1370 kN | 1900 rpm | 2400 rpm | 19.2 kg19200 g |
| SKF23132 CC/W33Spherical roller bearing with relubrication features |
| 1029 kN | 1370 kN | 1900 rpm | 2400 rpm | 19.8 kg19800 g |
| FAG23132-E1A-XL-K-MSpherical Roller Bearing |
| 1160 kN | 1550 kN | 1560 rpm | 2490 rpm | 19.267 kg19267 g |
| FAG23132-E1A-XL-K-M-C2Spherical Roller Bearing |
| 1160 kN | 1550 kN | 1560 rpm | 2490 rpm | 19.291 kg19291 g |
| FAG23132-E1A-XL-K-M-C3Spherical Roller Bearing |
| 1160 kN | 1550 kN | 1560 rpm | 2490 rpm | 19.1 kg19100 g |
| FAG23132-E1A-XL-K-M-C4Spherical Roller Bearing |
| 1160 kN | 1550 kN | 1560 rpm | 2490 rpm | 19.1 kg19100 g |
| FAG23132-E1A-XL-MSpherical Roller Bearing |
| 1160 kN | 1550 kN | 1560 rpm | 2490 rpm | 19.857 kg19857 g |
| FAG23132-E1A-XL-M-C3Spherical Roller Bearing |
| 1160 kN | 1550 kN | 1560 rpm | 2490 rpm | 19.857 kg19857 g |
| FAG23132-E1A-XL-M-C4Spherical Roller Bearing |
| 1160 kN | 1550 kN | 1560 rpm | 2490 rpm | 19.857 kg19857 g |
| FAG23132-E1A-XL-M-H151BSpherical Roller Bearing |
| 1160 kN | 1550 kN | 1560 rpm | 2490 rpm | 19.877 kg19877 g |
| FAG23132-E1-XL-K-TVPBSpherical Roller Bearing |
| 1160 kN | 1550 kN | 1560 rpm | 2490 rpm | 18.349 kg18349 g |
| FAG23132-E1-XL-K-TVPB-C3Spherical Roller Bearing |
| 1160 kN | 1550 kN | 1560 rpm | 2490 rpm | 18.344 kg18344 g |
| FAG23132-E1-XL-K-TVPB-C4Spherical Roller Bearing |
| 1160 kN | 1550 kN | 1560 rpm | 2490 rpm | 18.349 kg18349 g |
| FAG23132-E1-XL-TVPBSpherical Roller Bearing |
| 1160 kN | 1550 kN | 1560 rpm | 2490 rpm | 18.947 kg18947 g |
| FAG23132-E1-XL-TVPB-C3Spherical Roller Bearing |
| 1160 kN | 1550 kN | 1560 rpm | 2490 rpm | 18.946 kg18946 g |
| FAG23132-E1-XL-TVPB-C4Spherical Roller Bearing |
| 1160 kN | 1550 kN | 1560 rpm | 2490 rpm | 18.925 kg18925 g |
| TIMKEN23132EJW33Spherical roller bearing |
| 1160 kN | 1580 kN | — | — | 19.67 kg19670 g |
| TIMKEN23132EJW33C2Spherical roller bearing |
| 1160 kN | 1580 kN | — | — | 19.67 kg19670 g |
| TIMKEN23132EJW33C3Spherical roller bearing |
| 1160 kN | 1580 kN | — | — | 19.67 kg19670 g |
| TIMKEN23132EJW33C4Spherical roller bearing |
| 1160 kN | 1580 kN | — | — | 19.67 kg19670 g |
| TIMKEN23132EMW33Spherical roller bearing |
| 1160 kN | 1580 kN | — | — | 20.18 kg20180 g |
| TIMKEN23132EMW33C3Spherical roller bearing |
| 1160 kN | 1580 kN | — | — | 20.18 kg20180 g |
| TIMKEN23132EMW33C4Spherical roller bearing |
| 1160 kN | 1580 kN | — | — | 20.18 kg20180 g |
| TIMKEN23132KEJW33Spherical roller bearing |
| 1160 kN | 1580 kN | — | — | 19.03 kg19030 g |
| TIMKEN23132KEJW33C3Spherical roller bearing |
| 1160 kN | 1580 kN | — | — | 19.03 kg19030 g |
| TIMKEN23132KEMW33Spherical roller bearing |
| 1160 kN | 1580 kN | — | — | 19.56 kg19560 g |
| TIMKEN23132KEMW33C08C3Spherical roller bearing |
| 1160 kN | 1580 kN | — | — | 19.56 kg19560 g |
| TIMKEN23132KEMW33C3Spherical roller bearing |
| 1160 kN | 1580 kN | — | — | 19.56 kg19560 g |
| TIMKEN23132KEMW33C4Spherical roller bearing |
| 1160 kN | 1580 kN | — | — | 19.56 kg19560 g |
| NSK23132CAME4Spherical roller bearing |
| 1070 kN | 1400 kN | — | — | 20.3 kg20300 g |
| NSK23132CAMKE4Spherical roller bearing |
| 1070 kN | 1400 kN | — | — | — |
| NSK23132CE4Spherical roller bearing |
| 1070 kN | 1400 kN | — | — | 20.3 kg20300 g |
| NSK23132CKE4Spherical roller bearing |
| 1070 kN | 1400 kN | — | — | — |
| KOYO23132RHSpherical roller bearing |
| 1070 kN | 1430 kN | — | 1700 rpmLimiting Speeds(Grease Lub.): 1700 min-1Limiting Speeds(Oil Lub.): 2200 min-1 | 20.8 kg20800 g |
| KOYO23132RZK+AH3132Spherical roller bearing |
| 1070 kN | 1430 kN | — | 1700 rpmLimiting Speeds(Grease Lub.): 1700 min-1Limiting Speeds(Oil Lub.): 2200 min-1 | 23.4 kg23400 g |
| KOYO23132RZK+H3132Spherical roller bearing |
| 1070 kN | 1430 kN | — | 1700 rpmLimiting Speeds(Grease Lub.): 1700 min-1Limiting Speeds(Oil Lub.): 2200 min-1 | 27.9 kg27900 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 23132-2CS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 23132-2CS5W/GEM9 | Seal on both sides | Not recorded | CN | Sheet metal | Not recorded | Grease |
| SKF 23132 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23132 CC/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23132 CCK/C2W33 | Without | Not recorded | C2 | Sheet metal | Not recorded | None |
| SKF 23132 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23132 CCK/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23132 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 23132 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 23132-E1A-XL-K-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 23132-E1A-XL-K-M-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 23132-E1A-XL-K-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 23132-E1A-XL-K-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 23132-E1A-XL-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 23132-E1A-XL-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 23132-E1A-XL-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 23132-E1A-XL-M-H151B | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 23132-E1-XL-K-TVPB | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23132-E1-XL-K-TVPB-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23132-E1-XL-K-TVPB-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23132-E1-XL-TVPB | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23132-E1-XL-TVPB-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23132-E1-XL-TVPB-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | TVPB — Plastic cage | Not recorded | Not recorded |
| TIMKEN 23132EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23132EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23132EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23132EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23132EMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23132EMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23132EMW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23132KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23132KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23132KEMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23132KEMW33C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23132KEMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23132KEMW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 23132CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23132CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23132CE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 23132CKE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 23132RH | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23132RZK+AH3132 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23132RZK+H3132 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
23132-2CS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →SKF23132-2CS5W/GEM9
Spherical roller bearing with integral sealing
View full technical record →NSK23132CAME4
Spherical roller bearing
View full technical record →NSK23132CAMKE4
Spherical roller bearing
View full technical record →SKF23132 CC/C3W33
Spherical roller bearing with relubrication features
View full technical record →SKF23132 CC/C4W33
Spherical roller bearing with relubrication features
View full technical record →SKF23132 CCK/C2W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23132 CCK/C3W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23132 CCK/C4W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23132 CCK/W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23132 CC/W33
Spherical roller bearing with relubrication features
View full technical record →NSK23132CE4
Spherical roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.