Find · understand · compare
23072 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 23072. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
23072 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 60 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF23072 CAC/C083W509Spherical roller bearing with relubrication features |
| 2773 kN | 4650 kN | 950 rpm | 1200 rpm | 110 kg110000 g |
| SKF23072 CAC/C08W509Spherical roller bearing with relubrication features |
| 2773 kN | 4650 kN | 950 rpm | 1200 rpm | 110 kg110000 g |
| SKF23072 CACK/C083W507Spherical roller bearing with tapered bore and relubrication features |
| 2773 kN | 4650 kN | 950 rpm | 1200 rpm | 106 kg106000 g |
| SKF23072 CACK/C085W507Spherical roller bearing with tapered bore and relubrication features |
| 2773 kN | 4650 kN | 950 rpm | 1200 rpm | 106 kg106000 g |
| SKF23072 CACK/C08W507Spherical roller bearing with tapered bore and relubrication features |
| 2773 kN | 4650 kN | 950 rpm | 1200 rpm | 106 kg106000 g |
| SKF23072 CACK/W33Spherical roller bearing with tapered bore and relubrication features |
| 2773 kN | 4650 kN | 950 rpm | 1200 rpm | 104 kg104000 g |
| SKF23072 CAC/W33Spherical roller bearing with relubrication features |
| 2773 kN | 4650 kN | 950 rpm | 1200 rpm | 110 kg110000 g |
| SKF23072 CC/C083W513Spherical roller bearing with relubrication features |
| 2850 kN | 4800 kN | 950 rpm | 1200 rpm | 107 kg107000 g |
| SKF23072 CC/C3W33Spherical roller bearing with relubrication features |
| 2850 kN | 4800 kN | 950 rpm | 1200 rpm | 107 kg107000 g |
| SKF23072 CC/C4W33Spherical roller bearing with relubrication features |
| 2850 kN | 4800 kN | 950 rpm | 1200 rpm | 107 kg107000 g |
| SKF23072 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 2850 kN | 4800 kN | 950 rpm | 1200 rpm | 104 kg104000 g |
| SKF23072 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 2850 kN | 4800 kN | 950 rpm | 1200 rpm | 104 kg104000 g |
| SKF23072 CC/W33Spherical roller bearing with relubrication features |
| 2850 kN | 4800 kN | 950 rpm | 1200 rpm | 107 kg107000 g |
| SKF23072 CC/W33VQ424Spherical roller bearing with relubrication features |
| 2850 kN | 4800 kN | 950 rpm | 1200 rpm | 107 kg107000 g |
| FAG23072-BEA-XL-K-MB1Spherical Roller Bearing |
| 2800 kN | 4650 kN | 790 rpm | 1300 rpm | 103.2 kg103200 g |
| FAG23072-BEA-XL-K-MB1-C3Spherical Roller Bearing |
| 2800 kN | 4650 kN | 790 rpm | 1300 rpm | 103.2 kg103200 g |
| FAG23072-BEA-XL-K-MB1-C4Spherical Roller Bearing |
| 2800 kN | 4650 kN | 790 rpm | 1300 rpm | 103.15 kg103150 g |
| FAG23072-BEA-XL-MB1Spherical Roller Bearing |
| 2800 kN | 4650 kN | 790 rpm | 1300 rpm | 106.36 kg106360 g |
| FAG23072-BEA-XL-MB1-C3Spherical Roller Bearing |
| 2800 kN | 4650 kN | 790 rpm | 1300 rpm | 106.36 kg106360 g |
| FAG23072-BEA-XL-MB1-C4Spherical Roller Bearing |
| 2800 kN | 4650 kN | 790 rpm | 1300 rpm | 106.3 kg106300 g |
| FAG23072-BEA-XL-MB1-C5Spherical Roller Bearing |
| 2800 kN | 4650 kN | 790 rpm | 1300 rpm | 106.25 kg106250 g |
| FAG23072-BEA-XL-MB1-H151Spherical Roller Bearing |
| 2800 kN | 4650 kN | 790 rpm | 1300 rpm | 106.3 kg106300 g |
| FAG23072-BEA-XL-MB1-H151BSpherical Roller Bearing |
| 2800 kN | 4650 kN | 790 rpm | 1300 rpm | 106.3 kg106300 g |
| FAG23072-BEA-XL-MB1-H40ABSpherical Roller Bearing |
| 2800 kN | 4650 kN | 790 rpm | 1300 rpm | 106.3 kg106300 g |
| TIMKEN23072EJW507C08Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 103.33 kg103330 g |
| TIMKEN23072EJW507C08C2Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 103.33 kg103330 g |
| TIMKEN23072EJW507C08C3Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 103.33 kg103330 g |
| TIMKEN23072EJW507C08C4Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 103.33 kg103330 g |
| TIMKEN23072EJW509C08Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 103.31 kg103310 g |
| TIMKEN23072EJW509C08C3Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 103.31 kg103310 g |
| TIMKEN23072EJW509C08C4Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 103.31 kg103310 g |
| TIMKEN23072EMBW507C08Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 108.25 kg108250 g |
| TIMKEN23072EMBW507C08C3Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 108.25 kg108250 g |
| TIMKEN23072EMBW509C08Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 108.16 kg108160 g |
| TIMKEN23072EMBW509C08C3Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 108.16 kg108160 g |
| TIMKEN23072EMBW509C08C4Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 108.16 kg108160 g |
| TIMKEN23072EMBW906ASpherical roller bearing |
| 2840 kN | 4610 kN | — | — | 108.24 kg108240 g |
| TIMKEN23072KEJW507C08Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 99.93 kg99930 g |
| TIMKEN23072KEJW507C08C2Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 99.93 kg99930 g |
| TIMKEN23072KEJW507C08C3Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 99.93 kg99930 g |
| TIMKEN23072KEJW507C08C4Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 99.93 kg99930 g |
| TIMKEN23072KEJW906ASpherical roller bearing |
| 2840 kN | 4610 kN | — | — | 99.89 kg99890 g |
| TIMKEN23072KEJW906AC2Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 99.89 kg99890 g |
| TIMKEN23072KEJW906AC3Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 99.89 kg99890 g |
| TIMKEN23072KEMBW507C08Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 104.84 kg104840 g |
| TIMKEN23072KEMBW507C08C3Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 104.84 kg104840 g |
| TIMKEN23072KEMBW507C08C4Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 104.84 kg104840 g |
| TIMKEN23072KEMBW906ASpherical roller bearing |
| 2840 kN | 4610 kN | — | — | 104.78 kg104780 g |
| TIMKEN23072KEMBW906AC2Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 104.78 kg104780 g |
| TIMKEN23072KEMBW906AC3Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 104.78 kg104780 g |
| TIMKEN23072KEMBW906AC4Spherical roller bearing |
| 2840 kN | 4610 kN | — | — | 104.78 kg104780 g |
| NSK23072CAME4Spherical roller bearing |
| 2990 kN | 4700 kN | — | — | 106 kg106000 g |
| NSK23072CAMKE4Spherical roller bearing |
| 2990 kN | 4700 kN | — | — | — |
| KOYO23072RSpherical roller bearing |
| 2860 kN | 4800 kN | — | 500 rpmLimiting Speeds(Grease Lub.): 500 min-1Limiting Speeds(Oil Lub.): 660 min-1 | 115 kg115000 g |
| KOYO23072RHASpherical roller bearing |
| 3040 kN | 4770 kN | — | 500 rpmLimiting Speeds(Grease Lub.): 500 min-1Limiting Speeds(Oil Lub.): 660 min-1 | 105 kg105000 g |
| KOYO23072RHAK+AH3072Spherical roller bearing |
| 3040 kN | 4770 kN | — | 500 rpmLimiting Speeds(Grease Lub.): 500 min-1Limiting Speeds(Oil Lub.): 660 min-1 | 122 kg122000 g |
| KOYO23072RHAK+H3072Spherical roller bearing |
| 3040 kN | 4770 kN | — | 500 rpmLimiting Speeds(Grease Lub.): 500 min-1Limiting Speeds(Oil Lub.): 660 min-1 | 133 kg133000 g |
| KOYO23072RK+AH3072Spherical roller bearing |
| 2860 kN | 4800 kN | — | 500 rpmLimiting Speeds(Grease Lub.): 500 min-1Limiting Speeds(Oil Lub.): 660 min-1 | 132 kg132000 g |
| KOYO23072RK+H3072Spherical roller bearing |
| 2860 kN | 4800 kN | — | 500 rpmLimiting Speeds(Grease Lub.): 500 min-1Limiting Speeds(Oil Lub.): 660 min-1 | 143 kg143000 g |
| KOYO23072RSSelf-aligning ball bearing |
| 31.4 kN | 7.95 kN | — | 5100 rpmLimiting Speeds(Grease Lub.): 5100 min-1 | 0.675 kg675 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 23072 CAC/C083W509 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23072 CAC/C08W509 | Without | Not recorded | CN | Machined brass | Not recorded | None |
| SKF 23072 CACK/C083W507 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23072 CACK/C085W507 | Without | Not recorded | C5 | Machined brass | Not recorded | None |
| SKF 23072 CACK/C08W507 | Without | Not recorded | CN | Machined brass | Not recorded | None |
| SKF 23072 CACK/W33 | Without | Normal | CN | Machined brass | Not recorded | None |
| SKF 23072 CAC/W33 | Without | Normal | CN | Machined brass | Not recorded | None |
| SKF 23072 CC/C083W513 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23072 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23072 CC/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23072 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23072 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 23072 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 23072 CC/W33VQ424 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| FAG 23072-BEA-XL-K-MB1 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23072-BEA-XL-K-MB1-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23072-BEA-XL-K-MB1-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23072-BEA-XL-MB1 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23072-BEA-XL-MB1-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23072-BEA-XL-MB1-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23072-BEA-XL-MB1-C5 | Not recorded | Not recorded | Not recorded | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23072-BEA-XL-MB1-H151 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23072-BEA-XL-MB1-H151B | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23072-BEA-XL-MB1-H40AB | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| TIMKEN 23072EJW507C08 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23072EJW507C08C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23072EJW507C08C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23072EJW507C08C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23072EJW509C08 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23072EJW509C08C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23072EJW509C08C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23072EMBW507C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23072EMBW507C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23072EMBW509C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23072EMBW509C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23072EMBW509C08C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23072EMBW906A | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23072KEJW507C08 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23072KEJW507C08C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23072KEJW507C08C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23072KEJW507C08C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23072KEJW906A | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23072KEJW906AC2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23072KEJW906AC3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23072KEMBW507C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23072KEMBW507C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23072KEMBW507C08C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23072KEMBW906A | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23072KEMBW906AC2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23072KEMBW906AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23072KEMBW906AC4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 23072CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23072CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| KOYO 23072R | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23072RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23072RHAK+AH3072 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23072RHAK+H3072 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23072RK+AH3072 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23072RK+H3072 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23072RS | Sealed type | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
FAG
23072-BEA-XL-K-MB1
Spherical Roller Bearing
View full technical record →FAG23072-BEA-XL-K-MB1-C3
Spherical Roller Bearing
View full technical record →FAG23072-BEA-XL-K-MB1-C4
Spherical Roller Bearing
View full technical record →FAG23072-BEA-XL-MB1
Spherical Roller Bearing
View full technical record →FAG23072-BEA-XL-MB1-C3
Spherical Roller Bearing
View full technical record →FAG23072-BEA-XL-MB1-C4
Spherical Roller Bearing
View full technical record →FAG23072-BEA-XL-MB1-C5
Spherical Roller Bearing
View full technical record →FAG23072-BEA-XL-MB1-H151
Spherical Roller Bearing
View full technical record →FAG23072-BEA-XL-MB1-H151B
Spherical Roller Bearing
View full technical record →FAG23072-BEA-XL-MB1-H40AB
Spherical Roller Bearing
View full technical record →SKF23072 CAC/C083W509
Spherical roller bearing with relubrication features
View full technical record →SKF23072 CAC/C08W509
Spherical roller bearing with relubrication features
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.