Find · understand · compare
23068 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 23068. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
23068 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 59 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF23068 CAC/C083W507Spherical roller bearing with relubrication features |
| 2821 kN | 4550 kN | 1000 rpm | 1300 rpm | 105 kg105000 g |
| SKF23068 CAC/C08W507Spherical roller bearing with relubrication features |
| 2821 kN | 4550 kN | 1000 rpm | 1300 rpm | 105 kg105000 g |
| SKF23068 CACK/C083W507Spherical roller bearing with tapered bore and relubrication features |
| 2821 kN | 4550 kN | 1000 rpm | 1300 rpm | 102 kg102000 g |
| SKF23068 CACK/C08W507Spherical roller bearing with tapered bore and relubrication features |
| 2821 kN | 4550 kN | 1000 rpm | 1300 rpm | 102 kg102000 g |
| SKF23068 CACK/W33Spherical roller bearing with tapered bore and relubrication features |
| 2812 kN | 4550 kN | 1000 rpm | 1300 rpm | 102 kg102000 g |
| SKF23068 CAC/W33Spherical roller bearing with relubrication features |
| 2812 kN | 4550 kN | 1000 rpm | 1300 rpm | 105 kg105000 g |
| SKF23068 CC/C08W525Spherical roller bearing with relubrication features |
| 2812 kN | 4550 kN | 1000 rpm | 1300 rpm | 100 kg100000 g |
| SKF23068 CC/C3W33Spherical roller bearing with relubrication features |
| 2812 kN | 4550 kN | 1000 rpm | 1300 rpm | 100 kg100000 g |
| SKF23068 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 2812 kN | 4550 kN | 1000 rpm | 1300 rpm | 97 kg97000 g |
| SKF23068 CCK/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 2812 kN | 4550 kN | 1000 rpm | 1300 rpm | 97 kg97000 g |
| SKF23068 CCK/C5W33Spherical roller bearing with tapered bore and relubrication features |
| 2812 kN | 4550 kN | 1000 rpm | 1300 rpm | 97 kg97000 g |
| SKF23068 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 2812 kN | 4550 kN | 1000 rpm | 1300 rpm | 97 kg97000 g |
| SKF23068 CC/W33Spherical roller bearing with relubrication features |
| 2812 kN | 4550 kN | 1000 rpm | 1300 rpm | 100 kg100000 g |
| FAG23068-BEA-XL-K-MB1Spherical Roller Bearing |
| 2700 kN | 4400 kN | 840 rpm | 1360 rpm | 98.75 kg98750 g |
| FAG23068-BEA-XL-K-MB1-C2Spherical Roller Bearing |
| 2700 kN | 4400 kN | 840 rpm | 1360 rpm | 98.8 kg98800 g |
| FAG23068-BEA-XL-K-MB1-C3Spherical Roller Bearing |
| 2700 kN | 4400 kN | 840 rpm | 1360 rpm | 98.75 kg98750 g |
| FAG23068-BEA-XL-K-MB1-C4Spherical Roller Bearing |
| 2700 kN | 4400 kN | 840 rpm | 1360 rpm | 98.73 kg98730 g |
| FAG23068-BEA-XL-MB1Spherical Roller Bearing |
| 2700 kN | 4400 kN | 840 rpm | 1360 rpm | 101.36 kg101360 g |
| FAG23068-BEA-XL-MB1-C2Spherical Roller Bearing |
| 2700 kN | 4400 kN | 840 rpm | 1360 rpm | 101.4 kg101400 g |
| FAG23068-BEA-XL-MB1-C3Spherical Roller Bearing |
| 2700 kN | 4400 kN | 840 rpm | 1360 rpm | 101.3 kg101300 g |
| FAG23068-BEA-XL-MB1-H151Spherical Roller Bearing |
| 2700 kN | 4400 kN | 840 rpm | 1360 rpm | 101.2 kg101200 g |
| FAG23068-BEA-XL-MB1-H151BSpherical Roller Bearing |
| 2700 kN | 4400 kN | 840 rpm | 1360 rpm | 101 kg101000 g |
| FAG23068-BEA-XL-MB1-H40Spherical Roller Bearing |
| 2700 kN | 4400 kN | 840 rpm | 1360 rpm | 101.46 kg101460 g |
| FAG23068-BEA-XL-MB1-H40ABSpherical Roller Bearing |
| 2700 kN | 4400 kN | 840 rpm | 1360 rpm | 101.2 kg101200 g |
| TIMKEN23068EJW25W507C08Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 99.35 kg99350 g |
| TIMKEN23068EJW25W507C08C3Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 99.35 kg99350 g |
| TIMKEN23068EJW25W509C08Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 99.41 kg99410 g |
| TIMKEN23068EJW507C08Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 99.39 kg99390 g |
| TIMKEN23068EJW507C08C2Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 99.39 kg99390 g |
| TIMKEN23068EJW507C08C3Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 99.39 kg99390 g |
| TIMKEN23068EJW507C08C4Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 99.39 kg99390 g |
| TIMKEN23068EMBC08Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 103.29 kg103290 g |
| TIMKEN23068EMBW25W509C08Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 102.65 kg102650 g |
| TIMKEN23068EMBW25W509C08C3Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 102.65 kg102650 g |
| TIMKEN23068EMBW507C08Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 102.67 kg102670 g |
| TIMKEN23068EMBW507C08C3Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 102.67 kg102670 g |
| TIMKEN23068EMBW833W45ASpherical roller bearing |
| 2890 kN | 4630 kN | — | — | 102.67 kg102670 g |
| TIMKEN23068EMBW84W507C08Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 102.74 kg102740 g |
| TIMKEN23068KEJW507C08Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 96.19 kg96190 g |
| TIMKEN23068KEJW507C08C2Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 96.19 kg96190 g |
| TIMKEN23068KEJW507C08C3Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 96.19 kg96190 g |
| TIMKEN23068KEJW507C08C4Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 96.19 kg96190 g |
| TIMKEN23068KEJW507C08C6Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 96.19 kg96190 g |
| TIMKEN23068KEMBW40IW534Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 99.5 kg99500 g |
| TIMKEN23068KEMBW40IW534C3Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 99.5 kg99500 g |
| TIMKEN23068KEMBW40IW534C4Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 99.5 kg99500 g |
| TIMKEN23068KEMBW507C08Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 99.5 kg99500 g |
| TIMKEN23068KEMBW507C08C3Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 99.5 kg99500 g |
| TIMKEN23068KEMBW507C08C4Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 99.5 kg99500 g |
| TIMKEN23068KEMBW507C08C6Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 99.5 kg99500 g |
| TIMKEN23068KEMBW507C08S2C5Spherical roller bearing |
| 2890 kN | 4630 kN | — | — | 99.5 kg99500 g |
| NSK23068CAME4Spherical roller bearing |
| 2850 kN | 4400 kN | — | — | 101 kg101000 g |
| NSK23068CAMKE4Spherical roller bearing |
| 2850 kN | 4400 kN | — | — | — |
| KOYO23068RSpherical roller bearing |
| 2670 kN | 4330 kN | — | 530 rpmLimiting Speeds(Grease Lub.): 530 min-1Limiting Speeds(Oil Lub.): 710 min-1 | 108 kg108000 g |
| KOYO23068RHASpherical roller bearing |
| 2930 kN | 4470 kN | — | 530 rpmLimiting Speeds(Grease Lub.): 530 min-1Limiting Speeds(Oil Lub.): 710 min-1 | 98.7 kg98700 g |
| KOYO23068RHAK+AH3068Spherical roller bearing |
| 2930 kN | 4470 kN | — | 530 rpmLimiting Speeds(Grease Lub.): 530 min-1Limiting Speeds(Oil Lub.): 710 min-1 | 115 kg115000 g |
| KOYO23068RHAK+H3068Spherical roller bearing |
| 2930 kN | 4470 kN | — | 530 rpmLimiting Speeds(Grease Lub.): 530 min-1Limiting Speeds(Oil Lub.): 710 min-1 | 126 kg126000 g |
| KOYO23068RK+AH3068Spherical roller bearing |
| 2670 kN | 4330 kN | — | 530 rpmLimiting Speeds(Grease Lub.): 530 min-1Limiting Speeds(Oil Lub.): 710 min-1 | 125 kg125000 g |
| KOYO23068RK+H3068Spherical roller bearing |
| 2670 kN | 4330 kN | — | 530 rpmLimiting Speeds(Grease Lub.): 530 min-1Limiting Speeds(Oil Lub.): 710 min-1 | 135 kg135000 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 23068 CAC/C083W507 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23068 CAC/C08W507 | Without | Not recorded | CN | Machined brass | Not recorded | None |
| SKF 23068 CACK/C083W507 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 23068 CACK/C08W507 | Without | Not recorded | CN | Machined brass | Not recorded | None |
| SKF 23068 CACK/W33 | Without | Normal | CN | Machined brass | Not recorded | None |
| SKF 23068 CAC/W33 | Without | Normal | CN | Machined brass | Not recorded | None |
| SKF 23068 CC/C08W525 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 23068 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23068 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23068 CCK/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23068 CCK/C5W33 | Without | Not recorded | C5 | Sheet metal | Not recorded | None |
| SKF 23068 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 23068 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 23068-BEA-XL-K-MB1 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23068-BEA-XL-K-MB1-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23068-BEA-XL-K-MB1-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23068-BEA-XL-K-MB1-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23068-BEA-XL-MB1 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23068-BEA-XL-MB1-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23068-BEA-XL-MB1-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23068-BEA-XL-MB1-H151 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23068-BEA-XL-MB1-H151B | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23068-BEA-XL-MB1-H40 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 23068-BEA-XL-MB1-H40AB | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| TIMKEN 23068EJW25W507C08 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23068EJW25W507C08C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23068EJW25W509C08 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23068EJW507C08 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23068EJW507C08C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23068EJW507C08C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23068EJW507C08C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23068EMBC08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23068EMBW25W509C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23068EMBW25W509C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23068EMBW507C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23068EMBW507C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23068EMBW833W45A | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23068EMBW84W507C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23068KEJW507C08 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23068KEJW507C08C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23068KEJW507C08C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23068KEJW507C08C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23068KEJW507C08C6 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23068KEMBW40IW534 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23068KEMBW40IW534C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23068KEMBW40IW534C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23068KEMBW507C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23068KEMBW507C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23068KEMBW507C08C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23068KEMBW507C08C6 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23068KEMBW507C08S2C5 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 23068CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23068CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| KOYO 23068R | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23068RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23068RHAK+AH3068 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23068RHAK+H3068 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23068RK+AH3068 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23068RK+H3068 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
FAG
23068-BEA-XL-K-MB1
Spherical Roller Bearing
View full technical record →FAG23068-BEA-XL-K-MB1-C2
Spherical Roller Bearing
View full technical record →FAG23068-BEA-XL-K-MB1-C3
Spherical Roller Bearing
View full technical record →FAG23068-BEA-XL-K-MB1-C4
Spherical Roller Bearing
View full technical record →FAG23068-BEA-XL-MB1
Spherical Roller Bearing
View full technical record →FAG23068-BEA-XL-MB1-C2
Spherical Roller Bearing
View full technical record →FAG23068-BEA-XL-MB1-C3
Spherical Roller Bearing
View full technical record →FAG23068-BEA-XL-MB1-H151
Spherical Roller Bearing
View full technical record →FAG23068-BEA-XL-MB1-H151B
Spherical Roller Bearing
View full technical record →FAG23068-BEA-XL-MB1-H40
Spherical Roller Bearing
View full technical record →FAG23068-BEA-XL-MB1-H40AB
Spherical Roller Bearing
View full technical record →SKF23068 CAC/C083W507
Spherical roller bearing with relubrication features
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.