99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

23056 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 23056. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

23056 dimensions and recorded technical data

Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 68 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
SKF23056 CAC/C08W509Spherical roller bearing with relubrication features
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1747 kN2750 kN1300 rpm1600 rpm52.5 kg52500 g
SKF23056 CAC/C08W525Spherical roller bearing with relubrication features
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1747 kN2750 kN1300 rpm1600 rpm52.5 kg52500 g
SKF23056 CAC/C2W33Spherical roller bearing with relubrication features
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1747 kN2750 kN1300 rpm1600 rpm52.5 kg52500 g
SKF23056 CAC/C3W33Spherical roller bearing with relubrication features
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1747 kN2750 kN1300 rpm1600 rpm52.5 kg52500 g
SKF23056 CAC/C4W33Spherical roller bearing with relubrication features
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1747 kN2750 kN1300 rpm1600 rpm52.5 kg52500 g
SKF23056 CACK/C3W33Spherical roller bearing with tapered bore and relubrication features
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1747 kN2750 kN1300 rpm1600 rpm53.5 kg53500 g
SKF23056 CACK/C4W33Spherical roller bearing with tapered bore and relubrication features
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1747 kN2750 kN1300 rpm1600 rpm53.5 kg53500 g
SKF23056 CACK/C5W33Spherical roller bearing with tapered bore and relubrication features
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1747 kN2750 kN1300 rpm1600 rpm53.5 kg53500 g
SKF23056 CACK/HA3C4W33Spherical roller bearing with tapered bore and relubrication features
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1747 kN2750 kN1300 rpm1600 rpm53.5 kg53500 g
SKF23056 CACK/W33Spherical roller bearing with tapered bore and relubrication features
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1747 kN2750 kN1300 rpm1600 rpm53.5 kg53500 g
SKF23056 CAC/W33Spherical roller bearing with relubrication features
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1747 kN2750 kN1300 rpm1600 rpm52.5 kg52500 g
SKF23056 CC/C08W33Spherical roller bearing with relubrication features
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1797 kN2850 kN1300 rpm1600 rpm50 kg50000 g
SKF23056 CC/C08W33VQ349Spherical roller bearing with relubrication features
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1797 kN2850 kN1300 rpm1600 rpm50 kg50000 g
SKF23056 CC/C2W33Spherical roller bearing with relubrication features
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1797 kN2850 kN1300 rpm1600 rpm50 kg50000 g
SKF23056 CC/C3W33Spherical roller bearing with relubrication features
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1797 kN2850 kN1300 rpm1600 rpm50 kg50000 g
SKF23056 CC/C5W33Spherical roller bearing with relubrication features
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1797 kN2850 kN1300 rpm1600 rpm50 kg50000 g
SKF23056 CCK/C08W33Spherical roller bearing with tapered bore and relubrication features
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1797 kN2850 kN1300 rpm1600 rpm48.5 kg48500 g
SKF23056 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1797 kN2850 kN1300 rpm1600 rpm48.5 kg48500 g
SKF23056 CCK/C4W33Spherical roller bearing with tapered bore and relubrication features
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1797 kN2850 kN1300 rpm1600 rpm48.5 kg48500 g
SKF23056 CCK/HA3C4W33Spherical roller bearing with tapered bore and relubrication features
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1797 kN2850 kN1300 rpm1600 rpm48.5 kg48500 g
SKF23056 CCK/W33Spherical roller bearing with tapered bore and relubrication features
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1797 kN2850 kN1300 rpm1600 rpm48.8 kg48800 g
SKF23056 CC/W33Spherical roller bearing with relubrication features
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1797 kN2850 kN1300 rpm1600 rpm50 kg50000 g
FAG23056-BE-XLSpherical Roller Bearing
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1780 kN2850 kN1090 rpm1740 rpm50.205 kg50205 g
FAG23056-BE-XL>ASpherical Roller Bearing
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1780 kN2850 kN1090 rpm1740 rpm50.08 kg50080 g
FAG23056-BE-XL-C2Spherical Roller Bearing
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1780 kN2850 kN1090 rpm1740 rpm50.23 kg50230 g
FAG23056-BE-XL-C3Spherical Roller Bearing
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1780 kN2850 kN1090 rpm1740 rpm50.155 kg50155 g
FAG23056-BE-XL-C3>BSpherical Roller Bearing
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1780 kN2850 kN1090 rpm1740 rpm50.08 kg50080 g
FAG23056-BE-XL-C4Spherical Roller Bearing
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1780 kN2850 kN1090 rpm1740 rpm50.13 kg50130 g
FAG23056-BE-XL-C5Spherical Roller Bearing
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1780 kN2850 kN1090 rpm1740 rpm50.12 kg50120 g
FAG23056-BE-XL-H151BSpherical Roller Bearing
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1780 kN2850 kN1090 rpm1740 rpm50.185 kg50185 g
FAG23056-BE-XL-H151B-C3Spherical Roller Bearing
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1780 kN2850 kN1090 rpm1740 rpm50.135 kg50135 g
FAG23056-BE-XL-KSpherical Roller Bearing
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1780 kN2850 kN1090 rpm1740 rpm48.59 kg48590 g
FAG23056-BE-XL-K>ASpherical Roller Bearing
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1780 kN2850 kN1090 rpm1740 rpm48.76 kg48760 g
FAG23056-BE-XL-K-C3Spherical Roller Bearing
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1780 kN2850 kN1090 rpm1740 rpm48.665 kg48665 g
FAG23056-BE-XL-K-C3>BSpherical Roller Bearing
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1780 kN2850 kN1090 rpm1740 rpm48.76 kg48760 g
FAG23056-BE-XL-K-C4Spherical Roller Bearing
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1780 kN2850 kN1090 rpm1740 rpm48.645 kg48645 g
FAG23056-BE-XL-K-C5Spherical Roller Bearing
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1780 kN2850 kN1090 rpm1740 rpm48.58 kg48580 g
TIMKEN23056EJW33Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1820 kN2810 kN——48.75 kg48750 g
TIMKEN23056EJW33C2Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1820 kN2810 kN——48.75 kg48750 g
TIMKEN23056EJW33C3Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1820 kN2810 kN——48.75 kg48750 g
TIMKEN23056EJW507C08Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1820 kN2810 kN——49.01 kg49010 g
TIMKEN23056EJW507C08C2Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1820 kN2810 kN——49.01 kg49010 g
TIMKEN23056EJW507C08C3Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1820 kN2810 kN——49.01 kg49010 g
TIMKEN23056EMBW507C08Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1820 kN2810 kN——51.09 kg51090 g
TIMKEN23056EMBW507C08C2Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1820 kN2810 kN——51.09 kg51090 g
TIMKEN23056EMBW507C08C3Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1820 kN2810 kN——51.09 kg51090 g
TIMKEN23056EMBW507C08C4Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1820 kN2810 kN——51.09 kg51090 g
TIMKEN23056EMBW507C08S2C5Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1820 kN2810 kN——51 kg51000 g
TIMKEN23056EMBW509C08C3Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1820 kN2810 kN——50.98 kg50980 g
TIMKEN23056EMBW525C08Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1820 kN2810 kN——51.02 kg51020 g
TIMKEN23056KEJW33C2Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1820 kN2810 kN——47.1 kg47100 g
TIMKEN23056KEJW33C3Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1820 kN2810 kN——47.1 kg47100 g
TIMKEN23056KEJW40IW534C4Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1820 kN2810 kN——47.1 kg47100 g
TIMKEN23056KEJW507C08Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1820 kN2810 kN——47.1 kg47100 g
TIMKEN23056KEJW507C08C3Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1820 kN2810 kN——47.1 kg47100 g
TIMKEN23056KEJW507C08C4Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1820 kN2810 kN——47.1 kg47100 g
TIMKEN23056KEMBW40IW534C4Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1660 kN2790 kN——49.34 kg49340 g
TIMKEN23056KEMBW507C08Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1820 kN2810 kN——49.43 kg49430 g
TIMKEN23056KEMBW507C08C3Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1820 kN2810 kN——49.43 kg49430 g
TIMKEN23056KEMBW507C08C4Spherical roller bearing
Recorded bore (d)
280 mm
11.023622 in
Recorded outside dimension (D)
420 mm
16.535433 in
Catalogue width (symbol unverified)
106 mm
4.173228 in
1820 kN2810 kN——49.43 kg49430 g
NSK23056CAME4Spherical roller bearing
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Bearing width (B)
106 mm
4.173228 in
1930 kN2950 kN——50.5 kg50500 g
NSK23056CAMKE4Spherical roller bearing
Nominal bore diameter (1:12 taper) (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Bearing width (B)
106 mm
4.173228 in
1930 kN2950 kN———
KOYO23056RSpherical roller bearing
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1790 kN2860 kN—710 rpmLimiting Speeds(Grease Lub.): 710 min-1Limiting Speeds(Oil Lub.): 950 min-154.5 kg54500 g
KOYO23056RHASpherical roller bearing
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1940 kN2950 kN—700 rpmLimiting Speeds(Grease Lub.): 700 min-1Limiting Speeds(Oil Lub.): 940 min-149.8 kg49800 g
KOYO23056RHAK+AH3056Spherical roller bearing
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1940 kN2950 kN—700 rpmLimiting Speeds(Grease Lub.): 700 min-1Limiting Speeds(Oil Lub.): 940 min-160.2 kg60200 g
KOYO23056RHAK+H3056Spherical roller bearing
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1940 kN2950 kN—700 rpmLimiting Speeds(Grease Lub.): 700 min-1Limiting Speeds(Oil Lub.): 940 min-166.8 kg66800 g
KOYO23056RK+AH3056Spherical roller bearing
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1790 kN2860 kN—710 rpmLimiting Speeds(Grease Lub.): 710 min-1Limiting Speeds(Oil Lub.): 950 min-164.9 kg64900 g
KOYO23056RK+H3056Spherical roller bearing
Bore diameter (d)
280 mm
11.023622 in
Outside diameter (D)
420 mm
16.535433 in
Width (B)
106 mm
4.173228 in
1790 kN2860 kN—710 rpmLimiting Speeds(Grease Lub.): 710 min-1Limiting Speeds(Oil Lub.): 950 min-171.5 kg71500 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
SKF 23056 CAC/C08W509WithoutNot recordedCNMachined brassNot recordedNone
SKF 23056 CAC/C08W525WithoutNot recordedCNMachined brassNot recordedNone
SKF 23056 CAC/C2W33WithoutNot recordedC2Machined brassNot recordedNone
SKF 23056 CAC/C3W33WithoutNot recordedC3Machined brassNot recordedNone
SKF 23056 CAC/C4W33WithoutNot recordedC4Machined brassNot recordedNone
SKF 23056 CACK/C3W33WithoutNot recordedC3Machined brassNot recordedNone
SKF 23056 CACK/C4W33WithoutNot recordedC4Machined brassNot recordedNone
SKF 23056 CACK/C5W33WithoutNot recordedC5Machined brassNot recordedNone
SKF 23056 CACK/HA3C4W33WithoutNot recordedC4Machined brassNot recordedNone
SKF 23056 CACK/W33WithoutNormalCNMachined brassNot recordedNone
SKF 23056 CAC/W33WithoutNormalCNMachined brassNot recordedNone
SKF 23056 CC/C08W33WithoutNot recordedCNSheet metalNot recordedNone
SKF 23056 CC/C08W33VQ349WithoutNot recordedCNSheet metalNot recordedNone
SKF 23056 CC/C2W33WithoutNot recordedC2Sheet metalNot recordedNone
SKF 23056 CC/C3W33WithoutNot recordedC3Sheet metalNot recordedNone
SKF 23056 CC/C5W33WithoutNot recordedC5Sheet metalNot recordedNone
SKF 23056 CCK/C08W33WithoutNot recordedCNSheet metalNot recordedNone
SKF 23056 CCK/C3W33WithoutNot recordedC3Sheet metalNot recordedNone
SKF 23056 CCK/C4W33WithoutNot recordedC4Sheet metalNot recordedNone
SKF 23056 CCK/HA3C4W33WithoutNot recordedC4Sheet metalNot recordedNone
SKF 23056 CCK/W33WithoutNormalCNSheet metalNot recordedNone
SKF 23056 CC/W33WithoutNormalCNSheet metalNot recordedNone
FAG 23056-BE-XLNot recordedNot recordedCN (Group N) — Normal internal clearanceJPB — Sheet metal cageNot recordedNot recorded
FAG 23056-BE-XL>ANot recordedNot recordedNot recordedJPB — Sheet metal cageNot recordedNot recorded
FAG 23056-BE-XL-C2Not recordedNot recordedC2 (Group 2) — Internal clearance smaller than CNJPB — Sheet metal cageNot recordedNot recorded
FAG 23056-BE-XL-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNJPB — Sheet metal cageNot recordedNot recorded
FAG 23056-BE-XL-C3>BNot recordedNot recordedC3 (Group 3) — Internal clearance larger than CNJPB — Sheet metal cageNot recordedNot recorded
FAG 23056-BE-XL-C4Not recordedNot recordedC4 (Group 4) — Internal clearance larger than C3JPB — Sheet metal cageNot recordedNot recorded
FAG 23056-BE-XL-C5Not recordedNot recordedC5 (Group 5) — Internal clearance larger than C4JPB — Sheet metal cageNot recordedNot recorded
FAG 23056-BE-XL-H151BNot recordedNot recordedCN (Group N) — Normal internal clearanceJPB — Sheet metal cageNot recordedNot recorded
FAG 23056-BE-XL-H151B-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNJPB — Sheet metal cageNot recordedNot recorded
FAG 23056-BE-XL-KNot recordedNot recordedCN (Group N) — Normal internal clearanceJPB — Sheet metal cageNot recordedNot recorded
FAG 23056-BE-XL-K>ANot recordedNot recordedNot recordedJPB — Sheet metal cageNot recordedNot recorded
FAG 23056-BE-XL-K-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNJPB — Sheet metal cageNot recordedNot recorded
FAG 23056-BE-XL-K-C3>BNot recordedNot recordedC3 (Group 3) — Internal clearance larger than CNJPB — Sheet metal cageNot recordedNot recorded
FAG 23056-BE-XL-K-C4Not recordedNot recordedC4 (Group 4) — Internal clearance larger than C3JPB — Sheet metal cageNot recordedNot recorded
FAG 23056-BE-XL-K-C5Not recordedNot recordedC5 (Group 5) — Internal clearance larger than C4JPB — Sheet metal cageNot recordedNot recorded
TIMKEN 23056EJW33OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23056EJW33C2OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23056EJW33C3OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23056EJW507C08OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23056EJW507C08C2OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23056EJW507C08C3OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23056EMBW507C08OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23056EMBW507C08C2OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23056EMBW507C08C3OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23056EMBW507C08C4OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23056EMBW507C08S2C5OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23056EMBW509C08C3OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23056EMBW525C08OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23056KEJW33C2OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23056KEJW33C3OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23056KEJW40IW534C4OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23056KEJW507C08OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23056KEJW507C08C3OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23056KEJW507C08C4OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23056KEMBW40IW534C4OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23056KEMBW507C08OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23056KEMBW507C08C3OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 23056KEMBW507C08C4OpenNot recordedNot recordedBrass cageNot recordedNot recorded
NSK 23056CAME4Not recordedNot recordedCNMachined brassNot recordedNot recorded
NSK 23056CAMKE4Not recordedNot recordedCNMachined brassNot recordedNot recorded
KOYO 23056RNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 23056RHANot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 23056RHAK+AH3056Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 23056RHAK+H3056Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 23056RK+AH3056Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 23056RK+H3056Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

FAG

230/560-BEA-XL-K-MB1

Spherical Roller Bearing

View full technical record →FAG

230/560-BEA-XL-K-MB1-C3

Spherical Roller Bearing

View full technical record →FAG

230/560-BEA-XL-K-MB1-C4

Spherical Roller Bearing

View full technical record →FAG

230/560-BEA-XL-MB1

Spherical Roller Bearing

View full technical record →FAG

230/560-BEA-XL-MB1-C2

Spherical Roller Bearing

View full technical record →FAG

230/560-BEA-XL-MB1-C3

Spherical Roller Bearing

View full technical record →FAG

230/560-BEA-XL-MB1-C4

Spherical Roller Bearing

View full technical record →SKF

230/560 CA/C083W507

Spherical roller bearing with relubrication features

View full technical record →SKF

230/560 CA/C083W509

Spherical roller bearing with relubrication features

View full technical record →SKF

230/560 CA/C08W509

Spherical roller bearing with relubrication features

View full technical record →SKF

230/560 CA/C08W513

Spherical roller bearing with relubrication features

View full technical record →SKF

230/560 CA/C3W33

Spherical roller bearing with relubrication features

View full technical record →
Filter all 101 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search