Find · understand · compare
23048 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 23048. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
23048 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 63 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF23048-2CS5K/VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features |
| 1341 kN | 2080 kN | — | 500 rpm | 31.1 kg31100 g |
| SKF23048-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 1341 kN | 2080 kN | — | 500 rpm | 32.4 kg32400 g |
| SKF23048 CC/C08W33Spherical roller bearing with relubrication features |
| 1340 kN | 2080 kN | 1500 rpm | 1900 rpm | 32.4 kg32400 g |
| SKF23048 CC/C08W509Spherical roller bearing with relubrication features |
| 1340 kN | 2080 kN | 1500 rpm | 1900 rpm | 32.4 kg32400 g |
| SKF23048 CC/C3W33Spherical roller bearing with relubrication features |
| 1340 kN | 2080 kN | 1500 rpm | 1900 rpm | 32.4 kg32400 g |
| SKF23048 CC/C4W33Spherical roller bearing with relubrication features |
| 1340 kN | 2080 kN | 1500 rpm | 1900 rpm | 32.4 kg32400 g |
| SKF23048 CCK/C2W33Spherical roller bearing with tapered bore and relubrication features |
| 1340 kN | 2080 kN | 1500 rpm | 1900 rpm | 31.1 kg31100 g |
| SKF23048 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 1340 kN | 2080 kN | 1500 rpm | 1900 rpm | 31.1 kg31100 g |
| SKF23048 CCK/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 1340 kN | 2080 kN | 1500 rpm | 1900 rpm | 31.1 kg31100 g |
| SKF23048 CCK/C5W33Spherical roller bearing with tapered bore and relubrication features |
| 1340 kN | 2080 kN | 1500 rpm | 1900 rpm | 31.1 kg31100 g |
| SKF23048 CCK/HA3C4W33Spherical roller bearing with tapered bore and relubrication features |
| 1340 kN | 2080 kN | 1500 rpm | 1900 rpm | 31.1 kg31100 g |
| SKF23048 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 1340 kN | 2080 kN | 1500 rpm | 1900 rpm | 33.5 kg33500 g |
| SKF23048 CCK/W33VE194Spherical roller bearing |
| 1340 kN | 2080 kN | 1500 rpm | 1900 rpm | 31.1 kg31100 g |
| SKF23048 CCK/W33VQ424Spherical roller bearing with tapered bore and relubrication features |
| 1340 kN | 2080 kN | 1500 rpm | 1900 rpm | 32.4 kg32400 g |
| SKF23048 CC/W33Spherical roller bearing with relubrication features |
| 1340 kN | 2080 kN | 1500 rpm | 1900 rpm | 32.4 kg32400 g |
| SKF23048 CC/W33VE194Spherical roller bearing with locating slots and relubrication features |
| 1340 kN | 2080 kN | 1500 rpm | 1900 rpm | 32.4 kg32400 g |
| SKF23048 CC/W513Spherical roller bearing with relubrication features |
| 1340 kN | 2080 kN | 1500 rpm | 1900 rpm | 32.4 kg32400 g |
| FAG23048-BE-XLSpherical Roller Bearing |
| 1350 kN | 2120 kN | 1310 rpm | 2080 rpm | 32.1 kg32100 g |
| FAG23048-BE-XL>ASpherical Roller Bearing |
| 1350 kN | 2120 kN | 1310 rpm | 2080 rpm | 31.8 kg31800 g |
| FAG23048-BE-XL-C2Spherical Roller Bearing |
| 1350 kN | 2120 kN | 1310 rpm | 2080 rpm | 32.1 kg32100 g |
| FAG23048-BE-XL-C3Spherical Roller Bearing |
| 1350 kN | 2120 kN | 1310 rpm | 2080 rpm | 32.06 kg32060 g |
| FAG23048-BE-XL-C3>BSpherical Roller Bearing |
| 1350 kN | 2120 kN | 1310 rpm | 2080 rpm | 32.3 kg32300 g |
| FAG23048-BE-XL-C4Spherical Roller Bearing |
| 1350 kN | 2120 kN | 1310 rpm | 2080 rpm | 32.045 kg32045 g |
| FAG23048-BE-XL-C5Spherical Roller Bearing |
| 1350 kN | 2120 kN | 1310 rpm | 2080 rpm | 32 kg32000 g |
| FAG23048-BE-XL-H151BSpherical Roller Bearing |
| 1350 kN | 2120 kN | 1310 rpm | 2080 rpm | 32.6 kg32600 g |
| FAG23048-BE-XL-H151B-C3Spherical Roller Bearing |
| 1350 kN | 2120 kN | 1310 rpm | 2080 rpm | 32.6 kg32600 g |
| FAG23048-BE-XL-KSpherical Roller Bearing |
| 1350 kN | 2120 kN | 1310 rpm | 2080 rpm | 31.06 kg31060 g |
| FAG23048-BE-XL-K>ASpherical Roller Bearing |
| 1350 kN | 2120 kN | 1310 rpm | 2080 rpm | 31.28 kg31280 g |
| FAG23048-BE-XL-K-C3Spherical Roller Bearing |
| 1350 kN | 2120 kN | 1310 rpm | 2080 rpm | 31.065 kg31065 g |
| FAG23048-BE-XL-K-C3>BSpherical Roller Bearing |
| 1350 kN | 2120 kN | 1310 rpm | 2080 rpm | 31.28 kg31280 g |
| FAG23048-BE-XL-K-C4Spherical Roller Bearing |
| 1350 kN | 2120 kN | 1310 rpm | 2080 rpm | 31.09 kg31090 g |
| FAG23048-BE-XL-K-C4>CSpherical Roller Bearing |
| 1350 kN | 2120 kN | 1310 rpm | 2080 rpm | 31.6 kg31600 g |
| FAG23048-BE-XL-K-C5Spherical Roller Bearing |
| 1350 kN | 2120 kN | 1310 rpm | 2080 rpm | 31.05 kg31050 g |
| TIMKEN23048EJW33Spherical roller bearing |
| 1400 kN | 2140 kN | — | — | 31.14 kg31140 g |
| TIMKEN23048EJW33C2Spherical roller bearing |
| 1400 kN | 2140 kN | — | — | 31.14 kg31140 g |
| TIMKEN23048EJW33C3Spherical roller bearing |
| 1400 kN | 2140 kN | — | — | 31.14 kg31140 g |
| TIMKEN23048EJW33C4Spherical roller bearing |
| 1400 kN | 2140 kN | — | — | 31.14 kg31140 g |
| TIMKEN23048EJW33S2C3Spherical roller bearing |
| 1400 kN | 2140 kN | — | — | 31.14 kg31140 g |
| TIMKEN23048EMSpherical roller bearing |
| 1400 kN | 2140 kN | — | — | 32.59 kg32590 g |
| TIMKEN23048EMW33Spherical roller bearing |
| 1400 kN | 2140 kN | — | — | 32.2 kg32200 g |
| TIMKEN23048EMW33C08Spherical roller bearing |
| 1400 kN | 2140 kN | — | — | 32.2 kg32200 g |
| TIMKEN23048EMW33C08C3Spherical roller bearing |
| 1400 kN | 2140 kN | — | — | 32.2 kg32200 g |
| TIMKEN23048EMW33C2Spherical roller bearing |
| 1400 kN | 2140 kN | — | — | 32.2 kg32200 g |
| TIMKEN23048EMW33C3Spherical roller bearing |
| 1400 kN | 2140 kN | — | — | 32.2 kg32200 g |
| TIMKEN23048EMW33C4Spherical roller bearing |
| 1400 kN | 2140 kN | — | — | 32.2 kg32200 g |
| TIMKEN23048KEJW33Spherical roller bearing |
| 1400 kN | 2140 kN | — | — | 30.07 kg30070 g |
| TIMKEN23048KEJW33C2Spherical roller bearing |
| 1400 kN | 2140 kN | — | — | 30.07 kg30070 g |
| TIMKEN23048KEJW33C3Spherical roller bearing |
| 1400 kN | 2140 kN | — | — | 30.07 kg30070 g |
| TIMKEN23048KEJW33C4Spherical roller bearing |
| 1400 kN | 2140 kN | — | — | 30.07 kg30070 g |
| TIMKEN23048KEMW33Spherical roller bearing |
| 1400 kN | 2140 kN | — | — | 31.13 kg31130 g |
| TIMKEN23048KEMW33C08Spherical roller bearing |
| 1400 kN | 2140 kN | — | — | 31.13 kg31130 g |
| TIMKEN23048KEMW33C08C3Spherical roller bearing |
| 1400 kN | 2140 kN | — | — | 31.13 kg31130 g |
| TIMKEN23048KEMW33C08C4Spherical roller bearing |
| 1400 kN | 2140 kN | — | — | 31.13 kg31130 g |
| TIMKEN23048KEMW33C3Spherical roller bearing |
| 1400 kN | 2140 kN | — | — | 31.13 kg31130 g |
| TIMKEN23048KEMW33W40IC08C4Spherical roller bearing |
| 1400 kN | 2140 kN | — | — | 31.11 kg31110 g |
| NSK23048CAME4Spherical roller bearing |
| 1450 kN | 2140 kN | — | — | 32.6 kg32600 g |
| NSK23048CAMKE4Spherical roller bearing |
| 1450 kN | 2140 kN | — | — | — |
| KOYO23048RHASpherical roller bearing |
| 1470 kN | 2180 kN | — | 860 rpmLimiting Speeds(Grease Lub.): 860 min-1Limiting Speeds(Oil Lub.): 1100 min-1 | 31.9 kg31900 g |
| KOYO23048RHAK+AH3048Spherical roller bearing |
| 1470 kN | 2180 kN | — | 860 rpmLimiting Speeds(Grease Lub.): 860 min-1Limiting Speeds(Oil Lub.): 1100 min-1 | 39.7 kg39700 g |
| KOYO23048RHAK+H3048Spherical roller bearing |
| 1470 kN | 2180 kN | — | 860 rpmLimiting Speeds(Grease Lub.): 860 min-1Limiting Speeds(Oil Lub.): 1100 min-1 | 44.8 kg44800 g |
| KOYO23048RRSpherical roller bearing |
| 1480 kN | 2190 kN | — | 860 rpmLimiting Speeds(Grease Lub.): 860 min-1Limiting Speeds(Oil Lub.): 1100 min-1 | 33.9 kg33900 g |
| KOYO23048RRK+AH3048Spherical roller bearing |
| 1480 kN | 2190 kN | — | 860 rpmLimiting Speeds(Grease Lub.): 860 min-1Limiting Speeds(Oil Lub.): 1100 min-1 | 42.6 kg42600 g |
| KOYO23048RRK+H3048Spherical roller bearing |
| 1480 kN | 2190 kN | — | 860 rpmLimiting Speeds(Grease Lub.): 860 min-1Limiting Speeds(Oil Lub.): 1100 min-1 | 47.7 kg47700 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 23048-2CS5K/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 23048-2CS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 23048 CC/C08W33 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 23048 CC/C08W509 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 23048 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23048 CC/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23048 CCK/C2W33 | Without | Not recorded | C2 | Sheet metal | Not recorded | None |
| SKF 23048 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23048 CCK/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23048 CCK/C5W33 | Without | Not recorded | C5 | Sheet metal | Not recorded | None |
| SKF 23048 CCK/HA3C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23048 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 23048 CCK/W33VE194 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 23048 CCK/W33VQ424 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 23048 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 23048 CC/W33VE194 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 23048 CC/W513 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| FAG 23048-BE-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23048-BE-XL>A | Not recorded | Not recorded | Not recorded | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23048-BE-XL-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23048-BE-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23048-BE-XL-C3>B | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23048-BE-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23048-BE-XL-C5 | Not recorded | Not recorded | C5 (Group 5) — Internal clearance larger than C4 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23048-BE-XL-H151B | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23048-BE-XL-H151B-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23048-BE-XL-K | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23048-BE-XL-K>A | Not recorded | Not recorded | Not recorded | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23048-BE-XL-K-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23048-BE-XL-K-C3>B | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23048-BE-XL-K-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23048-BE-XL-K-C4>C | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23048-BE-XL-K-C5 | Not recorded | Not recorded | C5 (Group 5) — Internal clearance larger than C4 | JPB — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 23048EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23048EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23048EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23048EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23048EJW33S2C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23048EM | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23048EMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23048EMW33C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23048EMW33C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23048EMW33C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23048EMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23048EMW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23048KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23048KEJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23048KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23048KEJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23048KEMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23048KEMW33C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23048KEMW33C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23048KEMW33C08C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23048KEMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23048KEMW33W40IC08C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 23048CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23048CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| KOYO 23048RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23048RHAK+AH3048 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23048RHAK+H3048 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23048RR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23048RRK+AH3048 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23048RRK+H3048 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
23048-2CS5K/VT143
Spherical roller bearing with tapered bore, integral sealing and relubrication features
View full technical record →SKF23048-2CS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →FAG23048-BE-XL
Spherical Roller Bearing
View full technical record →FAG23048-BE-XL>A
Spherical Roller Bearing
View full technical record →FAG23048-BE-XL-C2
Spherical Roller Bearing
View full technical record →FAG23048-BE-XL-C3
Spherical Roller Bearing
View full technical record →FAG23048-BE-XL-C3>B
Spherical Roller Bearing
View full technical record →FAG23048-BE-XL-C4
Spherical Roller Bearing
View full technical record →FAG23048-BE-XL-C5
Spherical Roller Bearing
View full technical record →FAG23048-BE-XL-H151B
Spherical Roller Bearing
View full technical record →FAG23048-BE-XL-H151B-C3
Spherical Roller Bearing
View full technical record →FAG23048-BE-XL-K
Spherical Roller Bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.