Find · understand · compare
23044 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 23044. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
23044 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 53 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF23044-2CS5K/VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features |
| 1262 kN | 1860 kN | — | 540 rpm | 28.3 kg28300 g |
| SKF23044-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 1262 kN | 1860 kN | — | 540 rpm | 29.2 kg29200 g |
| SKF23044 CC/C2W33Spherical roller bearing with relubrication features |
| 1261 kN | 1860 kN | 1600 rpm | 2000 rpm | 29.1 kg29100 g |
| SKF23044 CC/C3W33Spherical roller bearing with relubrication features |
| 1261 kN | 1860 kN | 1600 rpm | 2000 rpm | 29.1 kg29100 g |
| SKF23044 CC/C4W33Spherical roller bearing with relubrication features |
| 1261 kN | 1860 kN | 1600 rpm | 2000 rpm | 29.1 kg29100 g |
| SKF23044 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 1261 kN | 1860 kN | 1600 rpm | 2000 rpm | 28.2 kg28200 g |
| SKF23044 CCK/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 1261 kN | 1860 kN | 1600 rpm | 2000 rpm | 28.2 kg28200 g |
| SKF23044 CCK/HA3C4W33Spherical roller bearing with tapered bore and relubrication features |
| 1261 kN | 1860 kN | 1600 rpm | 2000 rpm | 28.2 kg28200 g |
| SKF23044 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 1261 kN | 1860 kN | 1600 rpm | 2000 rpm | 28.2 kg28200 g |
| SKF23044 CC/W33Spherical roller bearing with relubrication features |
| 1261 kN | 1860 kN | 1600 rpm | 2000 rpm | 29.3 kg29300 g |
| SKF23044 CC/W33VE194Spherical roller bearing with locating slots and relubrication features |
| 1261 kN | 1860 kN | 1600 rpm | 2000 rpm | 29.1 kg29100 g |
| FAG23044-BE-XLSpherical Roller Bearing |
| 1260 kN | 1900 kN | 1450 rpm | 2230 rpm | 29.245 kg29245 g |
| FAG23044-BE-XL>ASpherical Roller Bearing |
| 1260 kN | 1900 kN | 1450 rpm | 2230 rpm | 29.1 kg29100 g |
| FAG23044-BE-XL-C2Spherical Roller Bearing |
| 1260 kN | 1900 kN | 1450 rpm | 2230 rpm | 29.285 kg29285 g |
| FAG23044-BE-XL-C3Spherical Roller Bearing |
| 1260 kN | 1900 kN | 1450 rpm | 2230 rpm | 29.24 kg29240 g |
| FAG23044-BE-XL-C3>BSpherical Roller Bearing |
| 1260 kN | 1900 kN | 1450 rpm | 2230 rpm | 29.1 kg29100 g |
| FAG23044-BE-XL-C4Spherical Roller Bearing |
| 1260 kN | 1900 kN | 1450 rpm | 2230 rpm | 29.21 kg29210 g |
| FAG23044-BE-XL-H151BSpherical Roller Bearing |
| 1260 kN | 1900 kN | 1450 rpm | 2230 rpm | 29.6 kg29600 g |
| FAG23044-BE-XL-KSpherical Roller Bearing |
| 1260 kN | 1900 kN | 1450 rpm | 2230 rpm | 28.385 kg28385 g |
| FAG23044-BE-XL-K>ASpherical Roller Bearing |
| 1260 kN | 1900 kN | 1450 rpm | 2230 rpm | 28.3 kg28300 g |
| FAG23044-BE-XL-K-C3Spherical Roller Bearing |
| 1260 kN | 1900 kN | 1450 rpm | 2230 rpm | 28.31 kg28310 g |
| FAG23044-BE-XL-K-C3>BSpherical Roller Bearing |
| 1260 kN | 1900 kN | 1450 rpm | 2230 rpm | 28.3 kg28300 g |
| FAG23044-BE-XL-K-C4Spherical Roller Bearing |
| 1260 kN | 1900 kN | 1450 rpm | 2230 rpm | 28.32 kg28320 g |
| TIMKEN23044EJW33Spherical roller bearing |
| 1340 kN | 1970 kN | — | — | 28.68 kg28680 g |
| TIMKEN23044EJW33C2Spherical roller bearing |
| 1340 kN | 1970 kN | — | — | 28.68 kg28680 g |
| TIMKEN23044EJW33C3Spherical roller bearing |
| 1340 kN | 1970 kN | — | — | 28.68 kg28680 g |
| TIMKEN23044EJW33C4Spherical roller bearing |
| 1340 kN | 1970 kN | — | — | 28.68 kg28680 g |
| TIMKEN23044EMSpherical roller bearing |
| 1340 kN | 1970 kN | — | — | 29.93 kg29930 g |
| TIMKEN23044EMW33Spherical roller bearing |
| 1340 kN | 1970 kN | — | — | 29.77 kg29770 g |
| TIMKEN23044EMW33C08Spherical roller bearing |
| 1340 kN | 1970 kN | — | — | 29.77 kg29770 g |
| TIMKEN23044EMW33C2Spherical roller bearing |
| 1340 kN | 1970 kN | — | — | 29.77 kg29770 g |
| TIMKEN23044EMW33C3Spherical roller bearing |
| 1340 kN | 1970 kN | — | — | 29.77 kg29770 g |
| TIMKEN23044EMW33C4Spherical roller bearing |
| 1340 kN | 1970 kN | — | — | 29.77 kg29770 g |
| TIMKEN23044EMW33W25Spherical roller bearing |
| 1340 kN | 1970 kN | — | — | 29.77 kg29770 g |
| TIMKEN23044EMW33W25C3Spherical roller bearing |
| 1340 kN | 1970 kN | — | — | 29.77 kg29770 g |
| TIMKEN23044EMW33W84C08Spherical roller bearing |
| 1340 kN | 1970 kN | — | — | 33.14 kg33140 g |
| TIMKEN23044KEJW33Spherical roller bearing |
| 1340 kN | 1970 kN | — | — | 27.74 kg27740 g |
| TIMKEN23044KEJW33C2Spherical roller bearing |
| 1340 kN | 1970 kN | — | — | 27.74 kg27740 g |
| TIMKEN23044KEJW33C3Spherical roller bearing |
| 1340 kN | 1970 kN | — | — | 27.74 kg27740 g |
| TIMKEN23044KEJW33C4Spherical roller bearing |
| 1340 kN | 1970 kN | — | — | 27.74 kg27740 g |
| TIMKEN23044KEMW33Spherical roller bearing |
| 1340 kN | 1970 kN | — | — | 28.83 kg28830 g |
| TIMKEN23044KEMW33C08Spherical roller bearing |
| 1340 kN | 1970 kN | — | — | 28.83 kg28830 g |
| TIMKEN23044KEMW33C3Spherical roller bearing |
| 1340 kN | 1970 kN | — | — | 28.83 kg28830 g |
| TIMKEN23044KEMW33C4Spherical roller bearing |
| 1340 kN | 1970 kN | — | — | 28.83 kg28830 g |
| TIMKEN23044KEMW33W40IC4Spherical roller bearing |
| 1340 kN | 1970 kN | — | — | 28.83 kg28830 g |
| NSK23044CAME4Spherical roller bearing |
| 1360 kN | 1980 kN | — | — | 29.7 kg29700 g |
| NSK23044CAMKE4Spherical roller bearing |
| 1360 kN | 1980 kN | — | — | — |
| KOYO23044RSpherical roller bearing |
| 1230 kN | 1890 kN | — | 940 rpmLimiting Speeds(Grease Lub.): 940 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 31.5 kg31500 g |
| KOYO23044RHASpherical roller bearing |
| 1370 kN | 1950 kN | — | 940 rpmLimiting Speeds(Grease Lub.): 940 min-1Limiting Speeds(Oil Lub.): 1200 min-1 | 28.8 kg28800 g |
| KOYO23044RHAK+AH3044Spherical roller bearing |
| 1370 kN | 1950 kN | — | 940 rpmLimiting Speeds(Grease Lub.): 940 min-1Limiting Speeds(Oil Lub.): 1200 min-1 | 35.3 kg35300 g |
| KOYO23044RHAK+H3044Spherical roller bearing |
| 1370 kN | 1950 kN | — | 940 rpmLimiting Speeds(Grease Lub.): 940 min-1Limiting Speeds(Oil Lub.): 1200 min-1 | 38.7 kg38700 g |
| KOYO23044RK+AH3044Spherical roller bearing |
| 1230 kN | 1890 kN | — | 940 rpmLimiting Speeds(Grease Lub.): 940 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 38 kg38000 g |
| KOYO23044RK+H3044Spherical roller bearing |
| 1230 kN | 1890 kN | — | 940 rpmLimiting Speeds(Grease Lub.): 940 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 41.4 kg41400 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 23044-2CS5K/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 23044-2CS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 23044 CC/C2W33 | Without | Not recorded | C2 | Sheet metal | Not recorded | None |
| SKF 23044 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23044 CC/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23044 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23044 CCK/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23044 CCK/HA3C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23044 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 23044 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 23044 CC/W33VE194 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| FAG 23044-BE-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23044-BE-XL>A | Not recorded | Not recorded | Not recorded | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23044-BE-XL-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23044-BE-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23044-BE-XL-C3>B | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23044-BE-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23044-BE-XL-H151B | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23044-BE-XL-K | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23044-BE-XL-K>A | Not recorded | Not recorded | Not recorded | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23044-BE-XL-K-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23044-BE-XL-K-C3>B | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 23044-BE-XL-K-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 23044EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23044EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23044EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23044EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23044EM | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23044EMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23044EMW33C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23044EMW33C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23044EMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23044EMW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23044EMW33W25 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23044EMW33W25C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23044EMW33W84C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23044KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23044KEJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23044KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23044KEJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23044KEMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23044KEMW33C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23044KEMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23044KEMW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23044KEMW33W40IC4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 23044CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23044CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| KOYO 23044R | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23044RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23044RHAK+AH3044 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23044RHAK+H3044 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23044RK+AH3044 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23044RK+H3044 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
23044-2CS5K/VT143
Spherical roller bearing with tapered bore, integral sealing and relubrication features
View full technical record →SKF23044-2CS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →FAG23044-BE-XL
Spherical Roller Bearing
View full technical record →FAG23044-BE-XL>A
Spherical Roller Bearing
View full technical record →FAG23044-BE-XL-C2
Spherical Roller Bearing
View full technical record →FAG23044-BE-XL-C3
Spherical Roller Bearing
View full technical record →FAG23044-BE-XL-C3>B
Spherical Roller Bearing
View full technical record →FAG23044-BE-XL-C4
Spherical Roller Bearing
View full technical record →FAG23044-BE-XL-H151B
Spherical Roller Bearing
View full technical record →FAG23044-BE-XL-K
Spherical Roller Bearing
View full technical record →FAG23044-BE-XL-K>A
Spherical Roller Bearing
View full technical record →FAG23044-BE-XL-K-C3
Spherical Roller Bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.