Find · understand · compare
23032 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 23032. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
23032 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 54 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF23032-2CS5K/VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features |
| 615 kN | 880 kN | — | 750 rpm | 8.9 kg8900 g |
| SKF23032-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 615 kN | 880 kN | — | 750 rpm | 9.24 kg9240 g |
| SKF23032 CC/C08W33Spherical roller bearing with relubrication features |
| 614 kN | 880 kN | 2400 rpm | 3000 rpm | 9.14 kg9140 g |
| SKF23032 CC/C2W33Spherical roller bearing with relubrication features |
| 614 kN | 880 kN | 2400 rpm | 3000 rpm | 9.14 kg9140 g |
| SKF23032 CC/C3W33Spherical roller bearing with relubrication features |
| 614 kN | 880 kN | 2400 rpm | 3000 rpm | 9.14 kg9140 g |
| SKF23032 CC/C3W33VE194Spherical roller bearing with locating slots and relubrication features |
| 614 kN | 880 kN | 2400 rpm | 3000 rpm | 9.14 kg9140 g |
| SKF23032 CC/C4W33Spherical roller bearing with relubrication features |
| 614 kN | 880 kN | 2400 rpm | 3000 rpm | 9.14 kg9140 g |
| SKF23032 CCK/C2W33Spherical roller bearing with tapered bore and relubrication features |
| 614 kN | 880 kN | 2400 rpm | 3000 rpm | 8.87 kg8870 g |
| SKF23032 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 614 kN | 880 kN | 2400 rpm | 3000 rpm | 8.87 kg8870 g |
| SKF23032 CCK/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 614 kN | 880 kN | 2400 rpm | 3000 rpm | 8.88 kg8880 g |
| SKF23032 CCK/C5W33Spherical roller bearing with tapered bore and relubrication features |
| 614 kN | 880 kN | 2400 rpm | 3000 rpm | 8.88 kg8880 g |
| SKF23032 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 614 kN | 880 kN | 2400 rpm | 3000 rpm | 8.6 kg8600 g |
| SKF23032 CC/W33Spherical roller bearing with relubrication features |
| 614 kN | 880 kN | 2400 rpm | 3000 rpm | 9.14 kg9140 g |
| SKF23032 CC/W33VE194Spherical roller bearing with locating slots and relubrication features |
| 614 kN | 880 kN | 2400 rpm | 3000 rpm | 9.14 kg9140 g |
| FAG23032-E1A-XL-K-MSpherical Roller Bearing |
| 720 kN | 1010 kN | 2060 rpm | 3050 rpm | 8.919 kg8919 g |
| FAG23032-E1A-XL-K-M-C2Spherical Roller Bearing |
| 720 kN | 1010 kN | 2060 rpm | 3050 rpm | 9.1 kg9100 g |
| FAG23032-E1A-XL-K-M-C3Spherical Roller Bearing |
| 720 kN | 1010 kN | 2060 rpm | 3050 rpm | 9.1 kg9100 g |
| FAG23032-E1A-XL-K-M-C4Spherical Roller Bearing |
| 720 kN | 1010 kN | 2060 rpm | 3050 rpm | 8.825 kg8825 g |
| FAG23032-E1A-XL-K-M-C5Spherical Roller Bearing |
| 720 kN | 1010 kN | 2060 rpm | 3050 rpm | 9.1 kg9100 g |
| FAG23032-E1A-XL-MSpherical Roller Bearing |
| 720 kN | 1010 kN | 2060 rpm | 3050 rpm | 9.296 kg9296 g |
| FAG23032-E1A-XL-M-C3Spherical Roller Bearing |
| 720 kN | 1010 kN | 2060 rpm | 3050 rpm | 9.265 kg9265 g |
| FAG23032-E1A-XL-M-C4Spherical Roller Bearing |
| 720 kN | 1010 kN | 2060 rpm | 3050 rpm | 9.282 kg9282 g |
| FAG23032-E1A-XL-M-C5Spherical Roller Bearing |
| 720 kN | 1010 kN | 2060 rpm | 3050 rpm | 9.288 kg9288 g |
| FAG23032-E1-XL-K-TVPBSpherical Roller Bearing |
| 720 kN | 1010 kN | 2060 rpm | 3050 rpm | 8.563 kg8563 g |
| FAG23032-E1-XL-K-TVPB-C3Spherical Roller Bearing |
| 720 kN | 1010 kN | 2060 rpm | 3050 rpm | 8.511 kg8511 g |
| FAG23032-E1-XL-K-TVPB-C4Spherical Roller Bearing |
| 720 kN | 1010 kN | 2060 rpm | 3050 rpm | 8.553 kg8553 g |
| FAG23032-E1-XL-TVPBSpherical Roller Bearing |
| 720 kN | 1010 kN | 2060 rpm | 3050 rpm | 8.9 kg8900 g |
| FAG23032-E1-XL-TVPB-C3Spherical Roller Bearing |
| 720 kN | 1010 kN | 2060 rpm | 3050 rpm | 8.84 kg8840 g |
| FAG23032-E1-XL-TVPB-C4Spherical Roller Bearing |
| 720 kN | 1010 kN | 2060 rpm | 3050 rpm | 8.828 kg8828 g |
| TIMKEN23032EJW33Spherical roller bearing |
| 705 kN | 1040 kN | — | — | 9.26 kg9260 g |
| TIMKEN23032EJW33C2Spherical roller bearing |
| 705 kN | 1040 kN | — | — | 9.26 kg9260 g |
| TIMKEN23032EJW33C3Spherical roller bearing |
| 705 kN | 1040 kN | — | — | 9.26 kg9260 g |
| TIMKEN23032EJW33C4Spherical roller bearing |
| 705 kN | 1040 kN | — | — | 9.26 kg9260 g |
| TIMKEN23032EMC3Spherical roller bearing |
| 705 kN | 1040 kN | — | — | 9.54 kg9540 g |
| TIMKEN23032EMW33Spherical roller bearing |
| 705 kN | 1040 kN | — | — | 9.41 kg9410 g |
| TIMKEN23032EMW33C2Spherical roller bearing |
| 705 kN | 1040 kN | — | — | 9.41 kg9410 g |
| TIMKEN23032EMW33C3Spherical roller bearing |
| 705 kN | 1040 kN | — | — | 9.41 kg9410 g |
| TIMKEN23032EMW33C4Spherical roller bearing |
| 705 kN | 1040 kN | — | — | 9.41 kg9410 g |
| TIMKEN23032KEJW33Spherical roller bearing |
| 705 kN | 1040 kN | — | — | 8.95 kg8950 g |
| TIMKEN23032KEJW33C2Spherical roller bearing |
| 705 kN | 1040 kN | — | — | 8.95 kg8950 g |
| TIMKEN23032KEJW33C3Spherical roller bearing |
| 705 kN | 1040 kN | — | — | 8.95 kg8950 g |
| TIMKEN23032KEJW33C4Spherical roller bearing |
| 705 kN | 1040 kN | — | — | 8.95 kg8950 g |
| TIMKEN23032KEJW33/H3032Spherical roller bearing |
| 705 kN | 1040 kN | — | — | 8.95 kg8950 g |
| TIMKEN23032KEMW33Spherical roller bearing |
| 705 kN | 1040 kN | — | — | 9.1 kg9100 g |
| TIMKEN23032KEMW33C3Spherical roller bearing |
| 705 kN | 1040 kN | — | — | 9.1 kg9100 g |
| TIMKEN23032KEMW33C4Spherical roller bearing |
| 705 kN | 1040 kN | — | — | 9.1 kg9100 g |
| NSK23032CAME4Spherical roller bearing |
| 675 kN | 955 kN | — | — | 9.66 kg9660 g |
| NSK23032CAMKE4Spherical roller bearing |
| 675 kN | 955 kN | — | — | — |
| NSK23032CDE4Spherical roller bearing |
| 675 kN | 955 kN | — | — | 9.66 kg9660 g |
| NSK23032CDKE4Spherical roller bearing |
| 675 kN | 955 kN | — | — | — |
| KOYO23032RHSpherical roller bearing |
| 667 kN | 924 kN | — | 1800 rpmLimiting Speeds(Grease Lub.): 1800 min-1Limiting Speeds(Oil Lub.): 2300 min-1 | 9.74 kg9740 g |
| KOYO23032RSSelf-aligning ball bearing |
| 15.7 kN | 3.2 kN | — | 9400 rpmLimiting Speeds(Grease Lub.): 9400 min-1 | 0.158 kg158 g |
| KOYO23032RZK+AH3032Spherical roller bearing |
| 667 kN | 924 kN | — | 1800 rpmLimiting Speeds(Grease Lub.): 1800 min-1Limiting Speeds(Oil Lub.): 2300 min-1 | 11.5 kg11500 g |
| KOYO23032RZK+H3032Spherical roller bearing |
| 667 kN | 924 kN | — | 1800 rpmLimiting Speeds(Grease Lub.): 1800 min-1Limiting Speeds(Oil Lub.): 2300 min-1 | 15 kg15000 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 23032-2CS5K/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 23032-2CS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 23032 CC/C08W33 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 23032 CC/C2W33 | Without | Not recorded | C2 | Sheet metal | Not recorded | None |
| SKF 23032 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23032 CC/C3W33VE194 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23032 CC/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23032 CCK/C2W33 | Without | Not recorded | C2 | Sheet metal | Not recorded | None |
| SKF 23032 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23032 CCK/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23032 CCK/C5W33 | Without | Not recorded | C5 | Sheet metal | Not recorded | None |
| SKF 23032 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 23032 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 23032 CC/W33VE194 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| FAG 23032-E1A-XL-K-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 23032-E1A-XL-K-M-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 23032-E1A-XL-K-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 23032-E1A-XL-K-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 23032-E1A-XL-K-M-C5 | Not recorded | Not recorded | Not recorded | M — Brass Cage | Not recorded | Not recorded |
| FAG 23032-E1A-XL-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 23032-E1A-XL-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 23032-E1A-XL-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 23032-E1A-XL-M-C5 | Not recorded | Not recorded | Not recorded | M — Brass Cage | Not recorded | Not recorded |
| FAG 23032-E1-XL-K-TVPB | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23032-E1-XL-K-TVPB-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23032-E1-XL-K-TVPB-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23032-E1-XL-TVPB | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23032-E1-XL-TVPB-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23032-E1-XL-TVPB-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | TVPB — Plastic cage | Not recorded | Not recorded |
| TIMKEN 23032EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23032EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23032EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23032EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23032EMC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23032EMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23032EMW33C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23032EMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23032EMW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23032KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23032KEJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23032KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23032KEJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23032KEJW33/H3032 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23032KEMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23032KEMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 23032KEMW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 23032CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23032CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 23032CDE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 23032CDKE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 23032RH | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23032RS | Sealed type | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23032RZK+AH3032 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23032RZK+H3032 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
23032-2CS5K/VT143
Spherical roller bearing with tapered bore, integral sealing and relubrication features
View full technical record →SKF23032-2CS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →NSK23032CAME4
Spherical roller bearing
View full technical record →NSK23032CAMKE4
Spherical roller bearing
View full technical record →SKF23032 CC/C08W33
Spherical roller bearing with relubrication features
View full technical record →SKF23032 CC/C2W33
Spherical roller bearing with relubrication features
View full technical record →SKF23032 CC/C3W33
Spherical roller bearing with relubrication features
View full technical record →SKF23032 CC/C3W33VE194
Spherical roller bearing with locating slots and relubrication features
View full technical record →SKF23032 CC/C4W33
Spherical roller bearing with relubrication features
View full technical record →SKF23032 CCK/C2W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23032 CCK/C3W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23032 CCK/C4W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.