99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

23024 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 23024. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

23024 dimensions and recorded technical data

Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 45 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
SKF23024-2RS5/VT143Spherical roller bearing with integral sealing and relubrication features
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
46 mm
1.811024 in
367 kN500 kN—1400 rpm3.89 kg3890 g
SKF23024-2RS5/VT143BSpherical roller bearing with integral sealing and relubrication features
Recorded bore (d)
120 mm
4.724409 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
367 kN500 kN——3.93 kg3930 g
SKF23024-2RS5W/C4GEM9Spherical roller bearing with integral sealing
Recorded bore (d)
120 mm
4.724409 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
367 kN500 kN——3.89 kg3890 g
SKF23024 CC/C2W33Spherical roller bearing with relubrication features
Recorded bore (d)
120 mm
4.724409 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
366 kN500 kN3200 rpm4000 rpm4 kg4000 g
SKF23024 CC/C3W33Spherical roller bearing with relubrication features
Recorded bore (d)
120 mm
4.724409 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
366 kN500 kN3200 rpm4000 rpm4.03 kg4030 g
SKF23024 CC/C4W33Spherical roller bearing with relubrication features
Recorded bore (d)
120 mm
4.724409 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
366 kN500 kN3200 rpm4000 rpm4 kg4000 g
SKF23024 CC/C5W33Spherical roller bearing with relubrication features
Recorded bore (d)
120 mm
4.724409 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
366 kN500 kN3200 rpm4000 rpm3.99 kg3990 g
SKF23024 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features
Recorded bore (d)
120 mm
4.724409 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
366 kN500 kN3200 rpm4000 rpm3.86 kg3860 g
SKF23024 CCK/W33Spherical roller bearing with tapered bore and relubrication features
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
46 mm
1.811024 in
366 kN500 kN3200 rpm4000 rpm3.86 kg3860 g
SKF23024 CC/W33Spherical roller bearing with relubrication features
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
46 mm
1.811024 in
366 kN500 kN3200 rpm4000 rpm4 kg4000 g
FAG23024-CP-M-C4Spherical Roller Bearing
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
46 mm
1.811024 in
—580 kN—30 rpm4.04 kg4040 g
FAG23024-E1A-XL-K-MSpherical Roller Bearing
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
46 mm
1.811024 in
430 kN580 kN2800 rpm3950 rpm3.906 kg3906 g
FAG23024-E1A-XL-K-M-C2Spherical Roller Bearing
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
46 mm
1.811024 in
430 kN580 kN2800 rpm3950 rpm3.799 kg3799 g
FAG23024-E1A-XL-K-M-C3Spherical Roller Bearing
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
46 mm
1.811024 in
430 kN580 kN2800 rpm3950 rpm3.868 kg3868 g
FAG23024-E1A-XL-K-M-C4Spherical Roller Bearing
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
46 mm
1.811024 in
430 kN580 kN2800 rpm3950 rpm3.876 kg3876 g
FAG23024-E1A-XL-K-M-C5Spherical Roller Bearing
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
46 mm
1.811024 in
430 kN580 kN2800 rpm3950 rpm3.97 kg3970 g
FAG23024-E1A-XL-MSpherical Roller Bearing
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
46 mm
1.811024 in
430 kN580 kN2800 rpm3950 rpm4.04 kg4040 g
FAG23024-E1A-XL-M-C2Spherical Roller Bearing
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
46 mm
1.811024 in
430 kN580 kN2800 rpm3950 rpm4.026 kg4026 g
FAG23024-E1A-XL-M-C3Spherical Roller Bearing
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
46 mm
1.811024 in
430 kN580 kN2800 rpm3950 rpm4.04 kg4040 g
FAG23024-E1A-XL-M-C4Spherical Roller Bearing
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
46 mm
1.811024 in
430 kN580 kN2800 rpm3950 rpm4.023 kg4023 g
FAG23024-E1A-XL-M-C5Spherical Roller Bearing
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
46 mm
1.811024 in
430 kN580 kN2800 rpm3950 rpm4.021 kg4021 g
FAG23024-E1-XL-K-TVPBSpherical Roller Bearing
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
46 mm
1.811024 in
430 kN580 kN2800 rpm3950 rpm3.705 kg3705 g
FAG23024-E1-XL-K-TVPB-C3Spherical Roller Bearing
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
46 mm
1.811024 in
430 kN580 kN2800 rpm3950 rpm3.704 kg3704 g
FAG23024-E1-XL-TVPBSpherical Roller Bearing
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
46 mm
1.811024 in
430 kN580 kN2800 rpm3950 rpm3.827 kg3827 g
FAG23024-E1-XL-TVPB-C3Spherical Roller Bearing
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
46 mm
1.811024 in
430 kN580 kN2800 rpm3950 rpm3.827 kg3827 g
FAG23024-E1-XL-TVPB-C4Spherical Roller Bearing
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
46 mm
1.811024 in
430 kN580 kN2800 rpm3950 rpm3.827 kg3827 g
TIMKEN23024EJW33Spherical roller bearing
Recorded bore (d)
120 mm
4.724409 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
408 kN574 kN——3.99 kg3990 g
TIMKEN23024EJW33C2Spherical roller bearing
Recorded bore (d)
120 mm
4.724409 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
408 kN574 kN——3.99 kg3990 g
TIMKEN23024EJW33C3Spherical roller bearing
Recorded bore (d)
120 mm
4.724409 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
408 kN574 kN——3.99 kg3990 g
TIMKEN23024EJW33C4Spherical roller bearing
Recorded bore (d)
120 mm
4.724409 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
408 kN574 kN——3.99 kg3990 g
TIMKEN23024EJW33S2Spherical roller bearing
Recorded bore (d)
120 mm
4.724409 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
408 kN574 kN——3.99 kg3990 g
TIMKEN23024KEJW33Spherical roller bearing
Recorded bore (d)
120 mm
4.724409 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
408 kN574 kN——3.86 kg3860 g
TIMKEN23024KEJW33C3Spherical roller bearing
Recorded bore (d)
120 mm
4.724409 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
408 kN574 kN——3.86 kg3860 g
TIMKEN23024KEJW33C4Spherical roller bearing
Recorded bore (d)
120 mm
4.724409 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
408 kN574 kN——3.86 kg3860 g
TIMKEN23024KEJW33C5Spherical roller bearing
Recorded bore (d)
120 mm
4.724409 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
408 kN574 kN——3.86 kg3860 g
TIMKEN23024KEJW33W999Spherical roller bearing
Recorded bore (d)
120 mm
4.724409 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
408 kN574 kN——3.86 kg3860 g
TIMKEN23024KEJW33W999C3Spherical roller bearing
Recorded bore (d)
120 mm
4.724409 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
408 kN574 kN——3.86 kg3860 g
TIMKEN23024KEMW33C3Spherical roller bearing
Recorded bore (d)
120 mm
4.724409 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
397 kN552 kN——3.86 kg3860 g
NSK23024CAME4Spherical roller bearing
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Bearing width (B)
46 mm
1.811024 in
395 kN525 kN——4.11 kg4110 g
NSK23024CAMKE4Spherical roller bearing
Nominal bore diameter (1:12 taper) (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Bearing width (B)
46 mm
1.811024 in
395 kN525 kN———
NSK23024CDE4Spherical roller bearing
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Bearing width (B)
46 mm
1.811024 in
395 kN525 kN——4.11 kg4110 g
NSK23024CDKE4Spherical roller bearing
Nominal bore diameter (1:12 taper) (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Bearing width (B)
46 mm
1.811024 in
395 kN525 kN———
KOYO23024RHSpherical roller bearing
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
46 mm
1.811024 in
394 kN524 kN—2300 rpmLimiting Speeds(Grease Lub.): 2300 min-1Limiting Speeds(Oil Lub.): 3200 min-14.2 kg4200 g
KOYO23024RZK+AHX3024Spherical roller bearing
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
46 mm
1.811024 in
394 kN524 kN—2300 rpmLimiting Speeds(Grease Lub.): 2300 min-1Limiting Speeds(Oil Lub.): 3200 min-14.82 kg4820 g
KOYO23024RZK+H3024XSpherical roller bearing
Bore diameter (d)
120 mm
4.724409 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
46 mm
1.811024 in
394 kN524 kN—2300 rpmLimiting Speeds(Grease Lub.): 2300 min-1Limiting Speeds(Oil Lub.): 3200 min-16.12 kg6120 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
SKF 23024-2RS5/VT143Seal on both sidesNormalCNSheet metalNot recordedGrease
SKF 23024-2RS5/VT143BSeal on both sidesNot recordedCNSheet metalNot recordedGrease
SKF 23024-2RS5W/C4GEM9Seal on both sidesNot recordedC4Sheet metalNot recordedGrease
SKF 23024 CC/C2W33WithoutNot recordedC2Sheet metalNot recordedNone
SKF 23024 CC/C3W33WithoutNot recordedC3Sheet metalNot recordedNone
SKF 23024 CC/C4W33WithoutNot recordedC4Sheet metalNot recordedNone
SKF 23024 CC/C5W33WithoutNot recordedC5Sheet metalNot recordedNone
SKF 23024 CCK/C3W33WithoutNot recordedC3Sheet metalNot recordedNone
SKF 23024 CCK/W33WithoutNormalCNSheet metalNot recordedNone
SKF 23024 CC/W33WithoutNormalCNSheet metalNot recordedNone
FAG 23024-CP-M-C4Not recordedNot recordedC4 (Group 4) — Internal clearance larger than C3M — Brass CageNot recordedNot recorded
FAG 23024-E1A-XL-K-MNot recordedNot recordedCN (Group N) — Normal internal clearanceM — Brass CageNot recordedNot recorded
FAG 23024-E1A-XL-K-M-C2Not recordedNot recordedC2 (Group 2) — Internal clearance smaller than CNM — Brass CageNot recordedNot recorded
FAG 23024-E1A-XL-K-M-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNM — Brass CageNot recordedNot recorded
FAG 23024-E1A-XL-K-M-C4Not recordedNot recordedC4 (Group 4) — Internal clearance larger than C3M — Brass CageNot recordedNot recorded
FAG 23024-E1A-XL-K-M-C5Not recordedNot recordedNot recordedM — Brass CageNot recordedNot recorded
FAG 23024-E1A-XL-MNot recordedNot recordedCN (Group N) — Normal internal clearanceM — Brass CageNot recordedNot recorded
FAG 23024-E1A-XL-M-C2Not recordedNot recordedC2 (Group 2) — Internal clearance smaller than CNM — Brass CageNot recordedNot recorded
FAG 23024-E1A-XL-M-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNM — Brass CageNot recordedNot recorded
FAG 23024-E1A-XL-M-C4Not recordedNot recordedC4 (Group 4) — Internal clearance larger than C3M — Brass CageNot recordedNot recorded
FAG 23024-E1A-XL-M-C5Not recordedNot recordedNot recordedM — Brass CageNot recordedNot recorded
FAG 23024-E1-XL-K-TVPBNot recordedNot recordedCN (Group N) — Normal internal clearanceTVPB — Plastic cageNot recordedNot recorded
FAG 23024-E1-XL-K-TVPB-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNTVPB — Plastic cageNot recordedNot recorded
FAG 23024-E1-XL-TVPBNot recordedNot recordedCN (Group N) — Normal internal clearanceTVPB — Plastic cageNot recordedNot recorded
FAG 23024-E1-XL-TVPB-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNTVPB — Plastic cageNot recordedNot recorded
FAG 23024-E1-XL-TVPB-C4Not recordedNot recordedC4 (Group 4) — Internal clearance larger than C3TVPB — Plastic cageNot recordedNot recorded
TIMKEN 23024EJW33OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23024EJW33C2OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23024EJW33C3OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23024EJW33C4OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23024EJW33S2OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23024KEJW33OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23024KEJW33C3OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23024KEJW33C4OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23024KEJW33C5OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23024KEJW33W999OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23024KEJW33W999C3OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 23024KEMW33C3OpenNot recordedNot recordedBrass cageNot recordedNot recorded
NSK 23024CAME4Not recordedNot recordedCNMachined brassNot recordedNot recorded
NSK 23024CAMKE4Not recordedNot recordedCNMachined brassNot recordedNot recorded
NSK 23024CDE4Not recordedNot recordedCNPressed steelNot recordedNot recorded
NSK 23024CDKE4Not recordedNot recordedCNPressed steelNot recordedNot recorded
KOYO 23024RHNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 23024RZK+AHX3024Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 23024RZK+H3024XNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

SKF

23024-2RS5/VT143

Spherical roller bearing with integral sealing and relubrication features

View full technical record →SKF

23024-2RS5/VT143B

Spherical roller bearing with integral sealing and relubrication features

View full technical record →SKF

23024-2RS5W/C4GEM9

Spherical roller bearing with integral sealing

View full technical record →NSK

23024CAME4

Spherical roller bearing

View full technical record →NSK

23024CAMKE4

Spherical roller bearing

View full technical record →SKF

23024 CC/C2W33

Spherical roller bearing with relubrication features

View full technical record →SKF

23024 CC/C3W33

Spherical roller bearing with relubrication features

View full technical record →SKF

23024 CC/C4W33

Spherical roller bearing with relubrication features

View full technical record →SKF

23024 CC/C5W33

Spherical roller bearing with relubrication features

View full technical record →SKF

23024 CCK/C3W33

Spherical roller bearing with tapered bore and relubrication features

View full technical record →SKF

23024 CCK/W33

Spherical roller bearing with tapered bore and relubrication features

View full technical record →SKF

23024 CC/W33

Spherical roller bearing with relubrication features

View full technical record →
Filter all 45 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search