Find · understand · compare
23022 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 23022. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
23022 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 29 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF23022-2RS/C3VT143Spherical roller bearing with integral sealing and relubrication features |
| 326 kN | 440 kN | — | 1500 rpm | 3.61 kg3610 g |
| SKF23022-2RS/VT143Spherical roller bearing with integral sealing and relubrication features |
| 326 kN | 440 kN | — | 1500 rpm | 3.61 kg3610 g |
| SKF23022 CC/C3W33Spherical roller bearing with relubrication features |
| 326 kN | 440 kN | 3400 rpm | 4300 rpm | 3.68 kg3680 g |
| SKF23022 CC/C4W33Spherical roller bearing with relubrication features |
| 326 kN | 440 kN | 3400 rpm | 4300 rpm | 3.68 kg3680 g |
| SKF23022 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 326 kN | 440 kN | 3400 rpm | 4300 rpm | 3.58 kg3580 g |
| SKF23022 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 326 kN | 440 kN | 3400 rpm | 4300 rpm | 3.58 kg3580 g |
| SKF23022 CC/W33Spherical roller bearing with relubrication features |
| 326 kN | 440 kN | 3400 rpm | 4300 rpm | 3.68 kg3680 g |
| FAG23022-E1A-XL-K-MSpherical Roller Bearing |
| 400 kN | 530 kN | 3000 rpm | 4200 rpm | 3.567 kg3567 g |
| FAG23022-E1A-XL-K-M-C3Spherical Roller Bearing |
| 400 kN | 530 kN | 3000 rpm | 4200 rpm | 3.57 kg3570 g |
| FAG23022-E1A-XL-MSpherical Roller Bearing |
| 400 kN | 530 kN | 3000 rpm | 4200 rpm | 3.679 kg3679 g |
| FAG23022-E1A-XL-M-C2Spherical Roller Bearing |
| 400 kN | 530 kN | 3000 rpm | 4200 rpm | 3.71 kg3710 g |
| FAG23022-E1A-XL-M-C3Spherical Roller Bearing |
| 400 kN | 530 kN | 3000 rpm | 4200 rpm | 3.677 kg3677 g |
| FAG23022-E1A-XL-M-C4Spherical Roller Bearing |
| 400 kN | 530 kN | 3000 rpm | 4200 rpm | 3.678 kg3678 g |
| FAG23022-E1A-XL-M-C5Spherical Roller Bearing |
| 400 kN | 530 kN | 3000 rpm | 4200 rpm | 3.67 kg3670 g |
| FAG23022-E1-XL-K-TVPBSpherical Roller Bearing |
| 400 kN | 530 kN | 3000 rpm | 4200 rpm | 3.4 kg3400 g |
| FAG23022-E1-XL-TVPBSpherical Roller Bearing |
| 400 kN | 530 kN | 3000 rpm | 4200 rpm | 3.505 kg3505 g |
| FAG23022-E1-XL-TVPB-C3Spherical Roller Bearing |
| 400 kN | 530 kN | 3000 rpm | 4200 rpm | 3.505 kg3505 g |
| FAG23022-E1-XL-TVPB-C4Spherical Roller Bearing |
| 400 kN | 530 kN | 3000 rpm | 4200 rpm | 3.495 kg3495 g |
| TIMKEN23022EJW33Spherical roller bearing |
| 391 kN | 534 kN | — | — | 3.61 kg3610 g |
| TIMKEN23022EJW33C2Spherical roller bearing |
| 391 kN | 534 kN | — | — | 3.61 kg3610 g |
| TIMKEN23022EJW33C3Spherical roller bearing |
| 391 kN | 534 kN | — | — | 3.61 kg3610 g |
| TIMKEN23022EJW33C4Spherical roller bearing |
| 391 kN | 534 kN | — | — | 3.61 kg3610 g |
| TIMKEN23022EJW841Spherical roller bearing |
| 391 kN | 534 kN | — | — | 3.66 kg3660 g |
| TIMKEN23022KEJW33Spherical roller bearing |
| 391 kN | 534 kN | — | — | 3.5 kg3500 g |
| TIMKEN23022KEJW33C3Spherical roller bearing |
| 391 kN | 534 kN | — | — | 3.5 kg3500 g |
| NSK23022CDE4Spherical roller bearing |
| 293 kN | 465 kN | — | — | 3.76 kg3760 g |
| NSK23022CDKE4Spherical roller bearing |
| 293 kN | 465 kN | — | — | — |
| KOYO23022RHSpherical roller bearing |
| 377 kN | 486 kN | — | 2600 rpmLimiting Speeds(Grease Lub.): 2600 min-1Limiting Speeds(Oil Lub.): 3400 min-1 | 3.85 kg3850 g |
| KOYO23022RSSelf-aligning ball bearing |
| 12 kN | 2.3 kN | — | 11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1 | 0.114 kg114 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 23022-2RS/C3VT143 | Seal on both sides | Not recorded | C3 | Sheet metal | Not recorded | Grease |
| SKF 23022-2RS/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 23022 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23022 CC/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 23022 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 23022 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 23022 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 23022-E1A-XL-K-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 23022-E1A-XL-K-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 23022-E1A-XL-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 23022-E1A-XL-M-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 23022-E1A-XL-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 23022-E1A-XL-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 23022-E1A-XL-M-C5 | Not recorded | Not recorded | Not recorded | M — Brass Cage | Not recorded | Not recorded |
| FAG 23022-E1-XL-K-TVPB | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23022-E1-XL-TVPB | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23022-E1-XL-TVPB-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 23022-E1-XL-TVPB-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | TVPB — Plastic cage | Not recorded | Not recorded |
| TIMKEN 23022EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23022EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23022EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23022EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23022EJW841 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23022KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 23022KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 23022CDE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 23022CDKE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 23022RH | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 23022RS | Sealed type | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
23022-2RS/C3VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →SKF23022-2RS/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →SKF23022 CC/C3W33
Spherical roller bearing with relubrication features
View full technical record →SKF23022 CC/C4W33
Spherical roller bearing with relubrication features
View full technical record →SKF23022 CCK/C3W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23022 CCK/W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF23022 CC/W33
Spherical roller bearing with relubrication features
View full technical record →NSK23022CDE4
Spherical roller bearing
View full technical record →NSK23022CDKE4
Spherical roller bearing
View full technical record →FAG23022-E1A-XL-K-M
Spherical Roller Bearing
View full technical record →FAG23022-E1A-XL-K-M-C3
Spherical Roller Bearing
View full technical record →FAG23022-E1A-XL-M
Spherical Roller Bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.